Дастури корбарии BTF-LIGHTING Пульти бесими дурдасти RF 2.4GHz ва маҷмӯаи контроллерҳои LED-и C03RF Tuya RGB

1. Муқаддима

This manual provides detailed instructions for the installation, operation, and maintenance of your BTF-LIGHTING RF 2.4GHz Wireless Remote (RC03RFB) and C03RF Tuya RGB LED Controller Kit. This kit is designed to control PWM RGB LED strips, offering versatile lighting options and smart home integration.

2. Маълумот оид ба бехатарӣ

• Таъмини таъминоти барқ ​​voltage matches the requirements of your LED strip and controller (DC5V/DC12V/DC24V).
• Do not exceed the maximum allowable current for the controller's power interfaces (5A and 12A respectively).
• Ин маҳсулот танҳо барои истифодаи дарунӣ пешбинӣ шудааст.
• Дастгоҳро аз об, намӣ ва ҳарорати баланд дур нигоҳ доред.
• Do not attempt to disassemble or modify the device. Contact qualified personnel for service.
• Batteries for the remote control are not included and must be purchased separately.

3. Мундариҷаи баста

Лутфан тасдиқ кунед, ки ҳама ашё дар бастаи шумо мавҷуданд:

• 1x RC03RFB Wireless Remote
• 1x C03RF Tuya Controller
• 1x RF Remote Bracket
• 2х винтҳо
• 1x Лавҳаи часпандаи дутарафа
• 1x RC03RF Remote Control Manual
• 1x C03RF Controller Manual

Note: The Tuya Gateway (GW01W) and 3A batteries for the remote are not included and must be purchased separately.

Image: Components of the BTF-LIGHTING RF 2.4GHz Wireless Remote and C03RF Tuya RGB LED Controller Kit, including the remote, controller, and mounting bracket.

4. Мушаххасоти

5. Танзимот

5.1. Wiring the LED Controller

Ensure your LED strip is compatible with this controller (PWM RGB 4-wire). Connect the LED strip to the controller's output terminals (V+, R, G, B) and the appropriate DC power supply to the controller's input terminals (V+, V-). The input voltage бояд ба ҷилд мувофиқ бошадtage of your LED strip (e.g., 12V strip requires a 12V power supply).

Image: Diagram illustrating the connection of a power supply and an RGB LED strip to the C03RF controller.

5.2. Ҷуфти назорати дурдаст

To pair the RC03RFB remote with the C03RF controller:

1. Боварӣ ҳосил кунед, ки контроллер хомӯш аст.
2. Қувваи барқ ​​​​дар контроллер.
3. Within 3 seconds of powering on, press the 'ON' button on the remote control.
4. The connected LED strip should flash to indicate successful pairing.

5.3. Tuya Gateway Connection (Optional)

For smart home integration and app control, a GW01W Tuya Gateway (sold separately) is required. Follow these steps:

1. Power Your Light Sources: Connect the LED strip to the power supply and the C03RF controller.
2. Power the GW01W Tuya Gateway: Install the gateway within 30m of your lights and near your WiFi router.
3. Download the Smart Life or Tuya Smart App: Create an account, add the device, then select the device working WiFi and enter the password. Ensure to select 2.4G WiFi. The gateway indicator should show blue light (Linking). When the light shows green light, the connection is successful.
4. Link the Lights or Controller to GW01W Gateway: l-ро хомӯш кунедamps you want to link, then switch them on again. Press the 'SET' button once on the 2.4G gateway within 5 seconds. The lights will blink 3 times slowly, indicating successful linking.

Image: Visual guide for connecting the LED strip controller to the Tuya Smart Life app using the GW01W Tuya Gateway.

6. Дастурҳои истифодабарӣ

6.1. Remote Control Functions (RC03RFB)

The RC03RFB remote features a touch wheel and various buttons for comprehensive control:

Image: Labeled diagram of the RC03RFB remote control, showing the color ring, power buttons, mode buttons, brightness/speed controls, and zone selection buttons.

• ФУРУШ/ХОМУШ: Power on/off the connected lights.
• Ранги ҳалқа: Touch to select from 16 million colors.
• Лётчик Лamp: Indicates remote activity.
• Усулҳои динамикӣ: Cycle through various pre-programmed lighting effects.
• Равшанӣ +/-: Сатҳи равшаниро танзим кунед.
• 7 Colors Switching: Quickly switch between primary colors.
• Color Temp/Saturation: Adjust color temperature or saturation (if applicable to your LED strip).
• Нури сафед: Activate white light mode.
• Суръат +/-: Adjust the speed of dynamic modes.
• Zone ON/(un)link Button (1-4): Turn on/off specific zones or link/unlink controllers to zones.
• Zone OFF/Night Light Mode: Turn off a specific zone or activate a low-brightness night light mode.

6.2. Назорати гурӯҳӣ

The remote supports 4 independent zones. You can assign multiple controllers to a single zone, allowing for synchronized control of various lighting areas. The 2.4GHz RF wireless transmission allows for control up to 98 feet (30 meters) in open environments.

Image: Illustration of 2.4GHz wireless transmission enabling 4-zone control across different rooms in a house.

6.3. Auto-Transmitting Function

The controllers feature an auto-transmitting function. One controller can transmit signals from the remote to another controller within 30 meters. As long as there is a controller within 30 meters of the remote or another controller, the effective control distance can be extended significantly.

Image: Diagram showing how the auto-transmitting function extends the remote control distance by relaying signals between controllers.

6.4. App Control Features (with Tuya Gateway)

When connected via the Tuya Gateway, the Smart Life or Tuya Smart app unlocks additional features:

• 16 миллион ранг: Access a full spectrum of colors.
• Танзими равшанӣ ва ранг: Fine-tune light output and color temperature.
• Саҳнаҳои динамикӣ: Choose from various pre-set or custom lighting scenes.
• Ритми мусиқӣ: Synchronize lights with music.
• Танзимоти таймер: Schedule lights to turn on/off at specific times.
• Назорати овоз: Compatible with third-party voice assistants like Amazon Alexa and Google Home.
• Мубодилаи дастгоҳ: Share control with family members.
• Тап-барои иҷро ва автоматикунонӣ: Create custom automation routines.
• Don't Disturb Mode: Prevents lights from turning on after power outages until manually activated twice.

7. Нигоҳдорӣ

• Clean the remote and controller with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Replace remote batteries (3A, not included) when the control range decreases or the remote becomes unresponsive.
• Боварӣ ҳосил кунед, ки ҳамаи пайвастҳо бехатар ва аз зангзанӣ холӣ мемонанд.

8. Баррасии мушкилот

9. Видеои расмии маҳсулот

Ин видеои расмиро то охир тамошо кунедview of the BTF-LIGHTING 2.4GHz RF LED Controller Series, demonstrating its features and compatibility.

10. Кафолат ва дастгирӣ

For warranty information and technical support, please refer to the documentation included with your product or visit the official BTF-LIGHTING webсайт. Квитансияи хариди худро барои даъвоҳои кафолат нигоҳ доред.