Alfred DB1W-BL

Alfred Touchscreen Smart Keypad Pin Door Lock Combo with Wi-Fi Connect Bridge & Bluetooth (DB1W)

Дастури корбар

1. Маҳсулот ба охир расидview

The Alfred Touchscreen Smart Keypad Pin Door Lock Combo with Wi-Fi Connect Bridge & Bluetooth (DB1W) is an advanced security solution designed for residential use. This system combines a robust smart lock with a touchscreen keypad, Bluetooth connectivity, and a Wi-Fi Connect Bridge for remote access and smart home integration.

Хусусиятҳои асосӣ инҳоянд:

Alfred DB1W Smart Lock and Wi-Fi Connect Bridge

Image: The Alfred DB1W Smart Lock (left) and the Alfred Connect Wi-Fi Bridge (right), showcasing системаи мукаммал.

2. Танзим ва насб

The Alfred DB1W Smart Lock is designed for easy DIY installation, replacing your existing deadbolt. For detailed, step-by-step visual instructions, it is highly recommended to use the BILT app.

2.1. Рӯйхати санҷиши пеш аз насб

BILT App for 3D Interactive Instructions

Image: Screenshot of the BILT app interface, highlighting its 3D interactive instructions for assembly and installation. The app is available on both the App Store and Google Play.

2.2. Монтажи механики

Follow the instructions provided by the BILT app or the included quick start guide to physically install the lock components onto your door. This typically involves removing your old deadbolt, installing the new latch, exterior keypad, interior assembly, and connecting the necessary cables.

Таркид view of Alfred DB1W Smart Lock components

Тасвир: таркиш view illustrating the various components of the Alfred DB1W Smart Lock, including the exterior keypad, interior assembly, deadbolt mechanism, and battery compartment, aiding in understanding the installation process.

2.3. Танзимоти ибтидоӣ ва ҷуфткунӣ

  1. Батареяҳоро насб кунед: Insert 4 AA alkaline batteries into the interior assembly of the lock.
  2. Download Alfred Home App: Download the "Alfred Home" app from your device's app store.
  3. Ҳисоб кушоед: Open the app and create a new user account or log in.
  4. Илова кардани дастгоҳ: Follow the in-app instructions to add your DB1W smart lock. This typically involves putting the lock into pairing mode and connecting via Bluetooth.
  5. Install Alfred Connect Bridge: Plug the Alfred Connect Wi-Fi Bridge into a power outlet within close proximity to your smart lock and your Wi-Fi router. Follow the app's instructions to connect the bridge to your home Wi-Fi network and pair it with your lock.

3. Идоракунии қулфи интеллектуалии шумо

3.1. Амали клавиатура

The touchscreen keypad allows for secure code-based entry.

Alfred DB1W Smart Lock Keypad

Тасвир: Нақшаи наздик view of the Alfred DB1W Smart Lock's touchscreen keypad, showing the numerical layout and the Alfred logo.

3.2. Alfred Home App Control

The Alfred Home app provides comprehensive control and monitoring of your smart lock.

3.3. Voice Control (via Alfred Connect Bridge)

With the Alfred Connect Wi-Fi Bridge, you can integrate your lock with compatible smart speakers (e.g., Amazon Alexa, Google Assistant) for voice commands.

4. Нигоҳдорӣ

4.1. Иваз кардани батарея

The Alfred DB1W Smart Lock operates on 4 AA alkaline batteries. The lock will provide a low battery warning through audible alerts and a visual indicator on the keypad (a battery icon). It is recommended to replace all four batteries simultaneously when this warning appears.

Шарҳ: If batteries completely fail, the lock can be temporarily powered via a micro-USB port located on the bottom of the exterior keypad for emergency access. Connect a standard micro-USB power bank or charger to provide temporary power to enter your code.

4.2. Тозакунӣ

To clean the touchscreen keypad and other surfaces, use a soft, damp cloth. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or electronic components.

5. Баррасии мушкилот

This section addresses common issues you might encounter with your Alfred DB1W Smart Lock.

МушкилотСабаби эҳтимолӣҲалли
Қулф ба вуруди клавиатура посух намедиҳад.Батареяҳо холӣ шудаанд; рамзи нодуруст; клавиатура фаъол нест.Replace batteries; ensure correct code is entered; touch keypad to activate before entering code.
Alfred Connect Bridge frequently disconnects or fails to connect to lock/Wi-Fi.Poor Wi-Fi signal; interference; bridge too far from lock or router; temporary network issue.Relocate bridge closer to both lock and Wi-Fi router; ensure strong Wi-Fi signal; restart router and bridge; check for firmware updates for the bridge via the Alfred Home app.
Lock does not respond to app commands.Bluetooth/Wi-Fi off on phone; lock out of Bluetooth range; bridge disconnected; app issue.Ensure Bluetooth is on and you are within range for direct connection; verify bridge connection for remote access; restart app; reinstall app if persistent.
Огоҳии кам будани батарея пас аз иваз кардани батарея боқӣ мемонад.Batteries not new or incorrect type; poor contact.Ensure new, high-quality alkaline batteries are used; check battery orientation and contacts.
Lock is jammed or difficult to operate manually.Misalignment during installation; door frame issues.Check door and frame alignment; ensure deadbolt moves freely without obstruction. Re-check installation steps if necessary.

5.1. Баргардонидани ҳолати заводӣ

A factory reset will erase all user codes and settings, restoring the lock to its original state. Refer to the Alfred Home app or the official Alfred support website for specific instructions on performing a factory reset for your DB1W model, as the procedure may vary slightly.

6. Мушаххасоти

ХусусиятТафсилот
БрендАлфред
Рақами моделDB1W-BL
РангиСиёҳ
Манбаи нерӯБатареяи барқӣ (4 x AA ишқорӣ)
Технологияи пайвастшавӣBluetooth, Wi-Fi (via Alfred Connect Bridge)
Дастгоҳҳои мувофиқSmartphone, Smart Speaker
Андозаҳои ашё (L x W x H)0.55 x 2.56 x 5.91 инч
Вазни ашё4 фунт
МатериалМеталл
Навъи насбDIY-и бесим
Компонентҳои дохилшудаAlfred Connect WIFI Integration Accessory, DB1-A Bluetooth enabled smart lock, Alfred Home App
UPC628341330138

7. Кафолат ва дастгирӣ

For warranty information, technical support, or further assistance, please contact Alfred International Inc., the manufacturer of this product.

Additional protection plans may be available for purchase from retailers. Please refer to your purchase documentation for details on any extended warranties or service agreements.

Ҳуҷҷатҳои марбут - DB1W-BL

Пешview Alfred Connect V2 User Guide: Quick Start and Setup Instructions
Get started with your Alfred Connect V2 Wi-Fi bridge. This guide covers app download, device pairing, indicator lights, reset procedures, and voice assistant integration for a seamless smart home experience.
Пешview Дастури зуди оғози экрани сенсории хонагии интеллектуалии силсилаи Alfred DB2
Quick start guide for the Alfred DB2 Series Smart Home Touchscreen Deadbolt, covering installation, app setup, PIN code management, and basic operation. Learn how to set up your smart lock, manage user PINs, and operate the lock.
Пешview Alfred Connect V2 Quick Start Guide
Concise guide to setting up your Alfred Connect V2 WIFI bridge for Alfred Smart Locks, including app download, device connection, indicators, and voice assistant integration.
Пешview Дастури зуди оғози қулфи интеллектуалии Alfred DB2S
Бо дастгоҳи нави сенсории Alfred DB2S Smart Home Touchbolt оғоз кунед. Ин дастури оғози зуд дастурҳоро оид ба танзими қулф, идоракунии рамзи PIN, истифода ва насб пешниҳод мекунад.
Пешview Дастурҳои барномасозии силсилаи Alfred DB1S - Дастури насби қулфи Smart
Дастурҳои мукаммали барномасозӣ ва дастури насб барои қулфи интеллектуалии силсилаи Alfred DB1S. Омӯзед, ки чӣ тавр насб кардан, барномарезии рамзҳои PIN, истифодаи хусусиятҳо ба монанди қулфи дубораи худкор ва ҳолати дур будан ва ҳалли мушкилот бо қулфи интеллектуалии Alfred-и худ.
Пешview Alfred DB1 Series Smart Lock Programming Instructions
Comprehensive programming instructions for the Alfred DB1 Series smart lock, covering initial setup, user PIN management, various operational modes like Away and Silent Mode, Bluetooth and Z-Wave settings, and troubleshooting.