Дастури корбарии NETCOMM CloudMesh WiFi6 моҳвораӣ (NS-02)

1. Муқаддима

Thank you for choosing the NETCOMM CloudMesh WiFi6 Satellite, model NS-02. This device is designed to extend your existing CloudMesh WiFi network, providing enhanced coverage and performance throughout your home or office. Utilizing WiFi6 (802.11ax) technology, it offers faster speeds, lower latency, and increased capacity for multiple devices. This manual provides detailed instructions for the proper installation, configuration, and maintenance of your CloudMesh WiFi6 Satellite.

2. Маълумот оид ба бехатарӣ

Please read these safety instructions carefully before operating the device to ensure safe and optimal performance.

Таъмини нерӯ: Use only the power adapter supplied with the device. Using an unauthorized power adapter may damage the device and void your warranty.
Вентилятсия: Ensure adequate ventilation around the device. Do not block any ventilation openings. Avoid placing the device in enclosed spaces or on soft surfaces that may impede airflow.
Ҷойгиршавӣ: Place the device in a dry, stable location away from direct sunlight, heat sources, and moisture. Avoid placing it near strong electromagnetic fields.
Тозакунӣ: Disconnect the power adapter before cleaning. Use a soft, dry cloth to clean the device. Do not use liquid or aerosol cleaners.
Хизматрасонӣ: Дастгоҳро худатон кушоед ё таъмир накунед. Ҳама хидматрасониро ба кормандони соҳибихтисос муроҷиат кунед.
Кӯдакон: Дастгоҳ ва замимаҳои онро аз дастрасии кӯдакон дур нигоҳ доред.

3. Мундариҷаи баста

Боварӣ ҳосил кунед, ки ҳама ашё дар бастаи шумо мавҷуданд:

NETCOMM CloudMesh WiFi6 Satellite (NS-02)
Адаптери барқ
Ethernet Cable (optional, for wired backhaul)
Дастури оғози зуд

4. Маҳсулот ба охир расидview

Familiarize yourself with the physical components of your CloudMesh WiFi6 Satellite.

Figure 4.1: NETCOMM CloudMesh WiFi6 Satellite (NS-02) Front View. The device is a sleek, white, cylindrical unit with a metallic silver base. The "CloudMesh" logo is prominently displayed on the front face.

4.1. Нишондиҳандаҳои LED

LED барқ: Ҳолати қувваи дастгоҳро нишон медиҳад.
Статуси LED: Shows the connection status and signal strength to the main CloudMesh router.

4.2. Портҳо ва тугмаҳо

Порти барқ: Ба адаптери барқи додашуда пайваст мешавад.
Портҳои Ethernet (LAN): For connecting wired devices or for wired backhaul to the main router.
Тугмаи WPS: For easy pairing with compatible CloudMesh devices.
Тугмаи Reset: Барои барқарор кардани дастгоҳ ба танзимоти пешфарзии заводӣ истифода мешавад.

5. Танзимот

Follow these steps to set up your CloudMesh WiFi6 Satellite.

5.1. Мулоҳизаҳо оид ба ҷойгиркунӣ

Optimal placement is crucial for effective WiFi extension. Place the satellite:

Within range of your main CloudMesh router.
In a central location that minimizes obstacles like thick walls or large metal objects.
Away from other electronic devices that may cause interference (e.g., microwaves, cordless phones).

5.2. Initial Connection (WPS Method)

Plug the power adapter into the satellite's power port and then into a wall outlet. The Power LED will illuminate.
Wait for the satellite to boot up (approximately 60-90 seconds). The Status LED will blink.
Press the WPS button on your main CloudMesh router for 2-3 seconds.
Within 2 minutes, press the WPS button on the CloudMesh WiFi6 Satellite for 2-3 seconds.
The Status LED on the satellite will blink rapidly during pairing. Once successfully paired, the Status LED will turn solid, indicating a good connection. The color of the LED may indicate signal strength (e.g., green for strong, amber for fair).

5.3. Initial Connection (Wired Backhaul)

For optimal performance, you can connect the satellite to your main router via an Ethernet cable (wired backhaul).

Plug the power adapter into the satellite's power port and then into a wall outlet.
Connect one end of an Ethernet cable to an available LAN port on your main CloudMesh router.
Connect the other end of the Ethernet cable to an Ethernet port on the CloudMesh WiFi6 Satellite.
The satellite will automatically detect the wired connection and integrate into your CloudMesh network. The Status LED will indicate a successful connection.

6. Operating Your CloudMesh WiFi6 Satellite

Once set up, the CloudMesh WiFi6 Satellite operates automatically to extend your network.

6.1. Network Extension

The satellite creates a seamless mesh network with your main CloudMesh router. Devices will automatically connect to the strongest available signal, whether from the router or the satellite, ensuring consistent coverage.

6.2. Пайваст кардани дастгоҳҳо

You can connect wireless devices (laptops, smartphones, tablets) to the extended WiFi network using your existing network name (SSID) and password. For wired devices, connect them directly to the Ethernet ports on the satellite.

7. Нигоҳдорӣ

Нигоҳубини мунтазами дастгоҳи шумо барои таъмини кори беҳтарин ва дарозумрии он мусоидат мекунад.

Тозакунӣ: Periodically wipe the exterior of the device with a soft, dry cloth. Do not use abrasive cleaners or solvents.
Навсозии нармафзор: NETCOMM may release firmware updates to improve performance or add new features. These updates are typically managed through your main CloudMesh router's interface. Refer to your main router's manual for instructions on checking and applying firmware updates.
Аз нав оғоз кардан: If you experience network issues, try restarting the satellite by unplugging its power adapter for 10 seconds and then plugging it back in.

8. Баррасии мушкилот

Ин бахш мушкилоти умумиеро, ки шумо метавонед дучор ояд, баррасӣ мекунад.

Мушкилот	Сабаби эҳтимолӣ	Ҳалли
Satellite not powering on.	Адаптери барқ пайваст нашудааст ё васлаки нодуруст.	Ensure the power adapter is securely connected to the satellite and a working power outlet. Try a different outlet.
Status LED is off or blinking slowly.	Not paired with the main router or poor signal.	Perform WPS pairing again (Section 5.2). Move the satellite closer to the main CloudMesh router. Ensure the main router is powered on and functioning correctly.
Connected devices have no internet access.	Issue with the main router or internet service.	Check if devices connected directly to the main router have internet access. Restart both the main router and the satellite. Contact your Internet Service Provider if the main router also has no internet.
Slow network speeds.	Poor satellite placement, interference, or network congestion.	Relocate the satellite to a more central position or closer to the main router. Кам кардани дахолати дигар дастгоҳҳои электронӣ. Consider using wired backhaul if possible (Section 5.3).

8.1. Баргардонидани ҳолати заводӣ

If issues persist, you may need to perform a factory reset. This will erase all custom settings and restore the device to its original factory defaults.

With the satellite powered on, locate the small reset button (usually a pinhole) on the device.
Use a paperclip or a similar pointed object to press and hold the reset button for approximately 10 seconds.
Вақте ки чароғҳои LED медурахшанд ё дастгоҳ аз нав фаъол мешавад, тугмаро раҳо кунед.
Allow the device to restart. You will then need to re-pair it with your main CloudMesh router as per Section 5.2 or 5.3.

9. Мушаххасоти

Technical specifications for the NETCOMM CloudMesh WiFi6 Satellite (NS-02).

Хусусият	Тафсилот
Номи модел	NS-02
Бренд	NETCOMM
Андозаҳои маҳсулот	5.91 x 5.91 x 8.27 инч
Вазни ашё	1.87 фунт
Стандартҳои алоқаи бесим	802.11ax (WiFi6)
Синфи басомади басомад	Дугона-банд
Технологияи пайвастшавӣ	WiFi6, Ethernet
Паҳнои бандҳои порти LAN	1000 Мбит/с
Протоколи амният	WPA2, WPA3
Хусусияти махсус	WPS
Дастгоҳҳои мувофиқ	Ноутбук, Компютери шахсӣ, Смартфон, Планшет
Санаи аввалин дастрас	24 июни соли 2023

10. Кафолат ва дастгирӣ

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official NETCOMM webсайт. Барои даъвоҳои кафолат далели хариди худро нигоҳ доред.

Манбаъҳои онлайн: For the latest drivers, firmware, and support articles, please visit the NETCOMM support portal.

Тамос бо дастгирии: If you require further assistance, please contact NETCOMM customer support through the channels listed on their official webсайт.

	Дастури зуди оғози моҳвораии NetComm CloudMesh NS-01 Дастури зуд барои моҳвораи NetComm CloudMesh NS-01, ки танзимоти муфассал, чораҳои бехатарӣ ва дастурҳои истифода барои васеъ кардани шабакаи Wi-Fi-и шуморо дар бар мегирад.
	Дастури насби NetComm CloudMesh Satellite NS-02 Дастури мукаммал оид ба танзим ва оптимизатсияи NetComm CloudMesh Satellite NS-02 барои фарогирии бефосилаи Wi-Fi. Дар бораи ҷойгиркунӣ, ҷуфткунӣ, бартараф кардани мушкилот ва хусусиятҳои пешрафта маълумот гиред.
	Дастури корбар NetComm CloudMesh Satellite NS-01 Дастури корбар барои NetComm CloudMesh Satellite (NS-01), ки маълумотро дар бораи насб, истифода, хусусиятҳо ва ҳалли мушкилот барои фарогирии бефосилаи WiFi дар хона таъмин мекунад.
	NetComm CloudMesh Satellite NS-02: Дастури оғози зуд барои фарогирии бефосилаи Wi-Fi This guide provides instructions for setting up the NetComm CloudMesh Satellite NS-02, including placement, pairing, light indicators, and advanced features like Wireless Bridge and Wired Mesh. Enhance your home Wi-Fi coverage with NetComm's mesh technology.
	Дастури зуд барои оғози NetComm NS-01 CloudMesh Satellite Дастури оғозёбӣ барои насби NetComm NS-01 CloudMesh Satellite, аз он ҷумла чизҳои дар қуттӣ мавҷудбуда, ҷузъҳои зарурӣ, маълумоти бехатарӣ ва дастурҳои ҷуфткунӣ.
	Дастури зуди оғози моҳвораии NetComm NS-01 CloudMesh \| Танзим ва танзимот Бо истифода аз моҳвораи NetComm NS-01 CloudMesh зуд оғоз кунед. Ин дастур дастурҳои қадам ба қадамро барои насб, пайвастшавӣ, бехатарӣ ва ҳалли мушкилот барои беҳтар кардани шабакаи Wi-Fi-и хонагии шумо пешниҳод мекунад.

NETCOMM NS-02