Муқаддима
This manual provides comprehensive instructions for the installation, operation, and maintenance of your RTX DTS1419 Three-Phase DIN Rail Energy Meter with WiFi connectivity. Please read this manual thoroughly before installation and use to ensure proper function and safety.
Хусусиятҳои маҳсулот
The RTX DTS1419 is an intelligent three-phase energy meter designed for DIN rail mounting. It offers advanced energy monitoring and control capabilities through WiFi connectivity and the Tuya Smart Life application.
Хусусиятҳои асосӣ инҳоянд:
- Real-time monitoring of voltage (V), current (A), and power (kW) for each phase.
- Remote control for switching power on or off.
- Clear LCD display for sequential data viewing.
- Integrated status indicator lights.
- Prepayment function with notifications for exceeding set energy limits.
- Detailed energy consumption statistics for each phase.
- Easy installation on a standard DIN rail.
- Иқтидори ҳадди аксар 80А.
- Continuous current rating of 10A per phase.
- Voice control compatibility with Google Home and Amazon Alexa.
- 2.4 GHz WiFi communication for direct router connection (no gateway required).
- Automated scenarios based on predefined measurement values (e.g., automatic shutdown if voltage exceeds limit).
- Archiving function for historical energy data.
Маълумот оид ба бехатарӣ
Чорабиниҳои бехатарӣ
Огоҳӣ: Installation and maintenance should only be performed by qualified electricians. Disconnect power before installation or servicing to prevent electric shock.
- Ensure all local electrical codes and regulations are followed during installation.
- Агар дастгоҳ осеб дида бошад, онро истифода набаред.
- Дастгоҳро аз об ва намии баланд дур нигоҳ доред.
- Аз ҳадди ниҳоии ҷорӣ аз 80А зиёд накунед.
- Ба заминкании дуруст таъмин кунед.
Ташкил кардан
1. Насбкунӣ
The RTX DTS1419 is designed for DIN rail mounting within an electrical panel.
- Монтаж: Securely attach the energy meter to a standard 35mm DIN rail. Ensure the clip at the bottom locks into place.
- Ноқил: Refer to the wiring diagram below for correct connection of the three phases (L1, L2, L3) and neutral (N). Ensure all connections are tight and secure.
Тавсифи тасвир: A detailed wiring diagram showing the connection points for the three phases (L1, L2, L3) and neutral (N) on the RTX DTS1419 energy meter. Input terminals are on the left, output terminals on the right. Each phase is clearly labeled with corresponding wire colors (brown, black, grey for phases, blue for neutral) and arrows indicating current flow.
- Фаъол: After verifying all connections, restore power to the circuit. The LCD display on the meter should illuminate.
2. Пайвастшавӣ ба барнома (Tuya Smart Life)
- Барномаро зеркашӣ кунед: Download the "Tuya Smart Life" app from your smartphone's app store (iOS or Android).
- Бақайдгирӣ/Воридшавӣ: Open the app and register a new account or log in to an existing one.
- Илова кардани дастгоҳ: In the app, tap the "+" icon to add a new device. Select "Electrical" > "Energy Meter (Wi-Fi)".
- Усули ҷуфт: On the RTX DTS1419 meter, press and hold the "SET" button until the network indicator light (blue LED) starts blinking rapidly. This indicates pairing mode.
- Ба Wi-Fi пайваст шавед: Follow the on-screen instructions in the app to connect the device to your 2.4 GHz Wi-Fi network. Ensure your phone is also connected to the same 2.4 GHz network.
- Дастгоҳ илова карда шуд: Once successfully paired, the network indicator light will become solid, and the device will appear in your Tuya Smart Life app.
Тавсифи тасвир: The RTX DTS1419 energy meter displayed next to a smartphone showing the Tuya Smart Life application interface. The app displays real-time energy data such as current, active power, and voltage, indicating successful connection and monitoring.
Дастурҳои амалиётӣ
1. Мониторинг дар вақти воқеӣ
Once connected to the Tuya Smart Life app, you can monitor various electrical parameters:
- Current Electrical Consumption (I): View the current draw in Ampэрес (А).
- Current Power Consumption (P): View the active power in Kilowatts (kW).
- Current Supply Voltagд (V): View ҷилдиtage барои ҳар як марҳила.
- Current Energy Consumption (kW.h): Track accumulated energy usage in kilowatt-hours.
The meter's LCD display also cycles through these values directly on the device.
Тавсифи тасвир: Пеш аз наздик view of the RTX DTS1419 Three-Phase DIN Rail Energy Meter. The LCD screen clearly displays "U 235.0", indicating a voltage reading of 235.0 Volts. Status indicator lights for Relay, Alert, Active, and Network are visible on the right side, along with the RTX and Tuya logos.
2. Идоракунии дурдаст
The Tuya Smart Life app allows you to remotely switch the power on or off for the connected circuit. This function activates the integrated relay within the meter.
- Open the device interface in the Tuya Smart Life app.
- Locate the "On/Off" toggle or button to control the power supply.
3. Energy Statistics and Archiving
The app provides independent energy consumption statistics for each phase and an archiving function for historical data. You can review daily, weekly, or monthly consumption trends.
Тавсифи тасвир: A screenshot of the Tuya Smart Life app interface, highlighting sections for "totalEle(kWh)" (total energy consumption) and "Gross generation(kWh)". This illustrates the app's capability to display both consumed and potentially generated energy data.
4. Prepayment Function
Set an energy limit within the Tuya Smart Life app. The device will notify you if this limit is exceeded, allowing for better energy budget management.
Тавсифи тасвир: A series of three screenshots from the Tuya Smart Life app. The first shows the main device interface. The second shows the "Expense management" screen with options for "Prepayment switch", "Balance energy", "Energy charge", and "Prepaid phone records". The third shows the device in an "Off" state, indicating remote control functionality.
5. Назорати овоз
Integrate the RTX DTS1419 with Google Home or Amazon Alexa for voice-activated control. Follow the instructions provided by Google Home or Alexa for connecting Tuya Smart Life devices.
- Enable the "Tuya Smart Life" skill/action in your voice assistant app.
- Link your Tuya account.
- Дастгоҳҳоро кашф кунед.
- Use voice commands such as "Alexa, turn off the main power" or "Hey Google, what is the energy consumption of the meter?" (Specific commands may vary based on setup).
6. Automatic Scenarios
Configure automated actions within the Tuya Smart Life app based on predefined measurement values. For example, you can set the device to automatically shut off if the voltage exceeds a safe limit.
- Navigate to the "Smart" or "Automation" section in the Tuya Smart Life app.
- Create a new automation.
- Set conditions based on voltage, current, or power readings from the DTS1419.
- Define actions, such as turning off the meter or sending a notification.
Нигоҳдорӣ
- Тозакунӣ: Дастгоҳро бо матои хушк ва мулоим пок кунед. Тозакунанда ё ҳалкунандаҳои абразивиро истифода набаред.
- Навсозии нармафзор: Periodically check the Tuya Smart Life app for available firmware updates for the device to ensure optimal performance and security.
- Санҷиши пайвастшавӣ: Regularly inspect wiring connections for tightness and signs of wear.
Мушкилкушо
| Мушкилот | Сабаби эҳтимолӣ | Ҳалли |
|---|---|---|
| Дастгоҳ фурӯзон нест. | Не таъминоти барқ; ноқилҳои нодуруст. | Check circuit breaker. Verify wiring connections according to the diagram. |
| Ба Wi-Fi пайваст шуда наметавонад. | Incorrect Wi-Fi password; 5GHz network; device not in pairing mode; weak signal. | Ensure correct 2.4 GHz Wi-Fi password. Put device in pairing mode (blinking blue LED). Move router closer or use a Wi-Fi extender. |
| Хониши нодуруст. | Loose wiring connections; faulty device. | Check all wiring connections for tightness. If problem persists, contact support. |
| Правленияи дурдаст кор намекунад. | No internet connection; app issue; device offline. | Check your home internet connection. Ensure the device is online in the Tuya app. Restart the app. |
Мушаххасоти
- Модели: DTS1419
- Бренд: RTX
- Навъи: Three-Phase DIN Rail Energy Meter
- Пайвастшавӣ: Wi-Fi (2.4 ГГц)
- Максимум ҷорӣ: 80А
- Ҷараёни доимӣ: 10A дар як марҳила
- Ҷилдиtage: 3x230/400V 50Hz
- Pulse Constant: 800имп/кВт/соат
- Синфи дақиқ: 1
- Мутобиқат: Tuya Smart Life App, Google Home, Amazon Alexa
- Монтаж: Роҳи оҳани 35mm
- ASIN: B0CDVLZV9B
Кафолат ва дастгирӣ
For warranty information, please refer to the documentation provided with your purchase or contact your retailer. For technical support, please visit the RTX webсайт ё шӯъбаи хидматрасонии муштариёни онҳо тамос гиред.
Истеҳсолкунанда: RTX
