Дастури корбарии системаи алоқаи гӯшмонаки Bluetooth-и мотосикли Sena 10S

1. Маҳсулот ба охир расидview

The Sena 10S Bluetooth motorcycle headset and intercom system kit is designed to facilitate seamless communication among riders. It supports full duplex, dual pairing for clear and natural conversations.

Хусусиятҳои асосӣ:

• Bluetooth 4.1 and Universal Intercom for broad compatibility.
• Crystal-clear HD audio with Advanced Noise Control for superior sound quality.
• Intercom communication range of up to 1.6 km (1.0 mi) in open terrain.
• Supports up to 4 riders for group communication.
• Smartphone pairing for music, GPS navigation, and phone calls.
• Talk time of 12 hours on a single charge.

Расми 1.1: Пеш view of the Sena 10S Motorcycle Bluetooth Headset.

2. Мундариҷаи баста

The Sena 10S Communication System package typically includes the following items:

• Sena 10S Headset Unit(s)
• Танзими баландгӯяк
• Микрофони Boom
• Микрофони симдор
• Монтажи Clamp Маҷмӯа
• USB барқ ​​ва кабели маълумот
• Кабели аудио
• Pads Velcro барои баландгӯякҳо
• Губкаҳои микрофон

Figure 2.1: All components included in the Sena 10S package.

3. Танзим ва насб

3.1 Пур кардани дастгоҳ

Before initial use, fully charge the Sena 10S headset. Connect the provided USB power & data cable to the headset's charging port and a USB power source. A full charge typically takes approximately 3 hours. The LED indicator will change color to indicate charging status.

Расми 3.1: Тараф view of the Sena 10S unit, showing the USB charging port.

3.2 Mounting on a Helmet

The Sena 10S can be mounted on most motorcycle helmets using the included clamp kit. Follow these general steps:

1. Буридани иддао дар пушти clamp воҳиди.
2. cl-ро лағжонедamp unit between the outer shell and the inner padding of your helmet, positioning it on the left side.
3. Tighten the screws to secure the clamp.
4. Attach the main headset unit to the clamp.
5. Install the speakers inside the helmet, aligning them with your ears. Use the Velcro pads if necessary.
6. Connect the microphone (boom or wired) to the headset unit and position it appropriately for clear voice pickup.

Figure 3.2: Sena 10S headset mounted on a motorcycle helmet.

4. Дастурҳои истифодабарӣ

4.1 Фаъол кардан/хомӯш кардан

• Фаъол: Press and hold the Phone Button and the Jog Dial for 1 second.
• Хомӯш: Tap the Phone Button and the Jog Dial simultaneously.

4.2 Назорати баландии овоз

Rotate the Jog Dial clockwise to increase volume and counter-clockwise to decrease volume.

4.3 Bluetooth Pairing (Smartphone)

To pair your smartphone with the Sena 10S for music, GPS, and phone calls:

1. With the headset off, press and hold the Phone Button for 5 seconds until the LED flashes red and blue alternately.
2. On your smartphone, enable Bluetooth and search for devices.
3. Select 'Sena 10S' from the list of found devices.
4. If prompted, enter '0000' for the PIN.

4.4 Алоқаи домофонӣ

The Sena 10S supports intercom communication with up to 4 riders. Ensure all devices are powered on and within range.

• Pairing with another Sena headset: Press and hold the Jog Dial of both units for 5 seconds until the LEDs flash red. Tap the Jog Dial on either unit to complete pairing.
• Starting/Ending Intercom: Tap the Jog Dial once to start or end a conversation with the first paired intercom friend. Tap twice for the second, and three times for the third.

4.5 Music Streaming and Phone Calls

• Навозиш/таваффақ кардани мусиқӣ: Рақамро барои 1 сония пахш карда нигоҳ доред.
• Ҷавоб додан/Занги хотимавӣ: Тугмаи телефонро пахш кунед.
• Рақами овозӣ: Тугмаи телефонро барои 3 сония пахш карда нигоҳ доред.

5. Нигоҳдорӣ ва нигоҳубин

To ensure the longevity and optimal performance of your Sena 10S headset, follow these maintenance guidelines:

• Дастгоҳро хушк нигоҳ доред. Намӣ метавонад ба схемаҳои дохилӣ зарар расонад.
• Барои тоза кардани дастгоҳ моддаҳои кимиёвии сахт, маҳлулҳои тозакунанда ё моддаҳои шустушӯи қавӣ истифода набаред.
• Clean the microphone and speaker grilles gently with a soft, dry cloth.
• Дастгоҳро дар ҷои хунук ва хушк нигоҳ доред, вақте ки истифода намешаванд.
• Барои нигоҳ доштани саломатии батарея, ҳатто агар истифода нашавед, батареяро мунтазам пур кунед.

6. Баррасии мушкилот

If you encounter issues with your Sena 10S, try the following steps:

• Не қудрат: Ensure the battery is charged. Connect to a power source and check if the charging indicator lights up.
• Овоз нест / Ҳаҷми паст: Check volume settings on both the headset and your connected device. Ensure speakers are correctly positioned.
• Intercom Not Connecting: Verify both units are powered on and within range. Re-attempt intercom pairing.
• Қатъи Bluetooth: Ensure your paired device is within range. Try re-pairing the device.
• Аз нав танзимкунии дастгоҳ: If issues persist, perform a factory reset (refer to the full user manual for specific instructions on your model).

7. Мушаххасоти техникӣ

8. Видеои расмии маҳсулот

9. Кафолат ва дастгирӣ

For detailed warranty information, please refer to the warranty card included in your product packaging or visit the official Sena website. For technical support, troubleshooting assistance, or further inquiries, please contact Sena customer service through their official channels.