Дастури корбарии кабели навъи 2 Depow 11kW 5m кабуд

1. Муқаддима

Thank you for choosing the Depow Type 2 to Type 2 EV Charging Cable. This 11kW, 5-meter cable is designed to provide efficient and reliable charging for your electric vehicle at home, public charging stations, or supermarkets. This manual provides essential information for the safe and effective use, maintenance, and troubleshooting of your charging cable.

Image: Depow Type 2 EV Charging Cable with included accessories.

2. Маълумот оид ба бехатарӣ

Always read and understand all safety instructions before using the product. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Do not use the cable if it is damaged, frayed, or shows any signs of wear.
• Ensure the charging connectors are clean and dry before connecting.
• Do not immerse the cable or connectors in water. The cable has an IP54 rating, meaning it is protected from dust and splashing water, but not full immersion.
• Do not attempt to open, disassemble, repair, or modify the cable. Contact qualified personnel for service.
• Аз дастрасии кӯдакон дур нигоҳ доред.
• Always handle the cable by the insulated grips.

Image: Caution and usage instructions as printed on product packaging.

3. Танзим ва насб

The Depow Type 2 cable is designed for plug-and-play use. No complex installation is required.

1. Кабелро кушоед: Carefully remove the charging cable and its accessories (carry bag, cable ties, microfibre cloth) from the packaging.
2. Тафтиши зарар: Before first use, visually inspect the entire cable, including both connectors, for any signs of damage, cuts, or wear. Do not use if any damage is observed.
3. Санҷиши мутобиқат: Ensure your electric vehicle and the charging station are equipped with Type 2 inlets/outlets. This cable is compatible with most vehicles using Type 2 connectors, such as ID.3, ID.4, ID.5, e-Golf, e-Up, Fiat 500, Model Y, Model 3, Spring, Kona, Ioniq 5, e-tron, ZOE, i3, i4, and 500 Hybrid.

4. Дастурҳои истифодабарӣ

Follow these steps to safely charge your electric vehicle:

1. Барои пур кардан омода шавед: Ensure your vehicle is parked safely and the charging port is accessible. Make sure the charging station is active and ready for use.
2. Connect to Charging Station: Take one end of the Depow Type 2 cable and firmly insert it into the Type 2 outlet of the charging station. Ensure it clicks into place securely.
3. Пайвастшавӣ ба мошин: Take the other end of the cable and firmly insert it into your vehicle's Type 2 charging inlet. Ensure it clicks into place securely.
4. Оғози пуркунии барқ: Follow the instructions on the charging station to start the charging process. This may involve swiping a card, using an app, or pressing a button. Your vehicle's dashboard or charging indicator will confirm that charging has begun.
5. Пуркунии монитор: While charging, ensure the cable is not under tension or being driven over. The cable's durable TPU coating allows flexibility even in cold weather.
6. Пас аз пуркунии барқ ​​ҷудо кунед: Once charging is complete, follow the charging station's instructions to stop the session. Disconnect the cable from your vehicle first, then from the charging station. Always handle the connectors by their grips.

Image: Hand holding the Type 2 connector.

Image: Connecting the cable to the vehicle.

5. Нигоҳдорӣ

Нигоҳдории дуруст дарозумрӣ ва кори бехатари сими пуркунандаи шуморо таъмин мекунад.

• Тозакунӣ: Regularly wipe down the cable and connectors with the provided microfibre cloth or a soft, dry cloth. If necessary, use a slightly damp cloth, ensuring all parts are completely dry before storage or next use. Do not use harsh chemicals or abrasive cleaners.
• Нигоҳдорӣ: After each use, coil the cable neatly. Use the included cable ties to secure it. Store the cable in the provided waterproof carry bag to protect it from dust, moisture, and physical damage. Store in a cool, dry place, away from direct sunlight and extreme temperatures.
• Санҷиш: Periodically inspect the cable for any signs of wear, cracks, fraying, or damage to the insulation or connectors. Check the rubber caps for the plugs for integrity. If any damage is found, discontinue use immediately and contact support.

6. Баррасии мушкилот

If you encounter issues with your Depow charging cable, try the following common troubleshooting steps:

• Cable Not Charging:
  • Ensure both ends of the cable are securely and fully inserted into the vehicle and charging station.
  • Check if the charging station is active and providing power.
  • Verify your vehicle's charging settings are correctly configured.
  • Ensure there are no error messages on the charging station or vehicle dashboard.
• Пуркунии суст:
  • The actual charging speed (kW) is determined by the lowest rated component among the charging station, the charging cable, and your vehicle's on-board charger.
  • Ensure the charging station is delivering its maximum power output.
  • Check your vehicle's specifications for its maximum AC charging rate.
• Аз ҳад зиёд гарм шудани кабел:
  • Immediately disconnect the cable if it feels excessively hot.
  • Ensure the cable is fully uncoiled during charging to allow for proper heat dissipation.
  • Verify that the charging station and vehicle are operating within their specified temperature ranges.

Агар ин қадамҳо мушкилотро ҳал накунанд, лутфан бо дастгирии муштариён тамос гиред.

7. Мушаххасоти

8. Кафолат ва дастгирӣ

Your Depow Type 2 Cable comes with a Кафолати стандартии 2-сола аз рӯзи харид. Ин кафолат нуқсонҳои истеҳсолӣ ва нуқсонҳои моддиро дар шароити муқаррарии истифода фаро мегирад.

Кафолат инҳоро дар бар намегирад:

• Зараре, ки дар натиҷаи истифодаи нодуруст, сӯиистифода, садама ё беэътиноӣ расонида шудааст.
• Зарар аз таъмир ё тағироти беиҷозат.
• Фарсудашавии муқаррарӣ.
• Damage due to improper storage or environmental conditions.

For warranty claims or technical support, please contact the seller or manufacturer through the platform where the product was purchased. Please have your purchase receipt and product model number (T2C11L5) ready when contacting support.