Муқаддима
This manual provides essential instructions for the installation, operation, and maintenance of your JONSBO TK-1 Micro ATX Mini Tower Computer Case. Please read this manual thoroughly before proceeding with assembly to ensure proper setup and safe usage.
Маълумот оид ба бехатарӣ
- Always disconnect power before installing or servicing components.
- Барои пешгирӣ аз шикастани онҳо, панелҳои шишагии сахтшударо бо эҳтиёт истифода баред.
- Барои пешгирӣ кардани хатарҳои барқ ба заминкании дурустро таъмин кунед.
- Қисмҳои хурдро аз кӯдакон дур нигоҳ доред.
Мундариҷаи баста
Боварӣ ҳосил кунед, ки ҳама ашё дар бастаи шумо мавҷуданд:
- JONSBO TK-1 Micro ATX Mini Tower Computer Case
- Accessory Kit (screws, zip ties, brackets)
- Дастури корбар (ин ҳуҷҷат)
Мушаххасоти
| Номи модел | TK-1 |
| Андозаҳо (L x W x H) | 299mm (W) x 310mm (D) x 345mm (H) (11.8 x 12.2 x 13.5 inches) |
| Мутобиқати motherboard | Micro ATX, MATX, Mini-ITX |
| Навъи парванда | Мини манора |
| Материал | Aluminum, Metal, Tempered Glass |
| Дастгирии дарозии GPU | Макс. 280мм |
| Дастгирии баландии хунуккунии CPU | Макс. 165мм |
| Дастгирии Radiator AIO | 240mm (Top) |
| Дастгирии PSU | ATX (Max. 220mm) |
| Drive Bays | 2 x 3.5" HDD or 1 x 2.5" SSD / 1 x 3.5" HDD |
| Портҳои I / O Front | 1 x USB 3.2 Gen2 Type-C (10Gbps), 1 x USB 3.0, 1 x Audio & Mic |
| Ҷойҳои васеъ | 4 |
Насб ва насб
1. Омодасозии парванда
The JONSBO TK-1 features a separated cabinet structure and hyperboloid glass design. Carefully remove the tempered glass side panels by unscrewing the thumb screws at the rear of the case. Place the panels on a soft, flat surface to prevent scratches.
Тасвир: Қафо view of the JONSBO TK-1 case, showing the removal of side panels for access to internal components.
2. Насб кардани плата
Install your Micro-ATX, MATX, or Mini-ITX motherboard into the main compartment. Ensure standoffs are correctly aligned before securing the motherboard with screws from the accessory kit.
Тасвир: дохилӣ view of the JONSBO TK-1 case, illustrating the motherboard installation area.
3. Насби воҳиди таъминоти барқ (PSU).
The case supports ATX power supplies up to 220mm in length. Install the PSU in its designated compartment, typically located at the rear or bottom, and secure it with screws.
Тасвир: View of the JONSBO TK-1 case showing the power supply unit installed in its dedicated compartment.
4. Насби корти графикӣ (GPU).
The case accommodates GPUs up to 280mm in length. Install your graphics card into the appropriate PCIe slot on the motherboard and secure it.
Тасвир: Пеш view of the JONSBO TK-1 case, highlighting the graphics card installed within the main chamber.
5. Cooling System Setup
The TK-1 supports various cooling configurations:
- боло: 2 x 120mm fans or 240mm AIO liquid cooler.
- Поён: 2 x 120mm fans.
- CPU сардтар: Max height 165mm.
Тасвир: дохилӣ view of the JONSBO TK-1 case, showcasing the installation of cooling fans and an AIO liquid cooler.
6. Drive Bay Configuration
The case offers flexible storage options:
- 2 x 3.5 дюймаи HDD
- OR 1 x 2.5" SSD and 1 x 3.5" HDD
Utilize the provided brackets and screws to secure your storage devices.
7. Идоракунии кабел
Route all necessary cables (power, data, front I/O) neatly through the designated cutouts and tie-down points. This improves airflow and aesthetics.
8. Портҳои вуруд/хуруҷи пеш
Connect the front I/O cables from the case to the corresponding headers on your motherboard. The front panel includes:
- 1 x USB 3.2 Gen2 Type-C (10Gbps)
- 1 x USB 3.0
- 1 x Audio & Mic combo jack
Дастурҳои амалиётӣ
Фаъол/хомӯш
Press the power button located on the front panel to turn your system on or off. Ensure all external peripherals are connected before powering on.
Назорати мухлис
Fan speed and RGB lighting (if applicable) can typically be controlled via your motherboard's BIOS/UEFI settings or dedicated software provided by your motherboard manufacturer.
Нигоҳдорӣ
Тозакунӣ
Regularly clean the dust filters and interior of your case to maintain optimal airflow and cooling performance. Use compressed air to remove dust from fans and heatsinks.
Tempered Glass Care
- Clean glass panels with a soft, lint-free cloth and a mild glass cleaner.
- Аз маводи абразивӣ ё кимиёвии сахт худдорӣ намоед.
- The 4mm tempered glass panels have a 2H hardness explosion-proof protective film applied; do not remove this film.
Мушкилкушо
Система фаъол нест
- Check all power connections, including the PSU to the wall outlet, and internal connections to the motherboard and components.
- Verify that the front panel power switch cable is correctly connected to the motherboard.
Масъалаҳои гармшавии аз ҳад зиёд
- Ensure all case fans are properly installed and functioning.
- Verify that CPU cooler and GPU fans are spinning.
- Clean dust filters and internal components to improve airflow.
Намоиши баромад
- Confirm that your monitor is connected to the graphics card (GPU) and not the motherboard's integrated graphics ports (unless integrated graphics are intended for use).
- Корти графикӣ ва модулҳои RAM-ро аз нав ҷойгир кунед.
Видеоҳои маҳсулот
JONSBO TK-1 Micro ATX Mini Tower Computer Case Overview
Видео: Як мансабдор тамом шудview of the JONSBO TK-1 Micro ATX Mini Tower Computer Case, showcasing its design, features, and internal layout. This video provides a visual guide to the case's aesthetics and component compatibility.
JONSBO TK-0 ITX Mini Tower Case Features (Similar Design)
Video: A detailed look at the JONSBO TK-0 ITX Mini Tower PC Case, which shares a similar hyperboloid glass design and structural elements with the TK-1. This video can provide insights into general assembly and feature highlights.
Кафолат ва дастгирӣ
JONSBO products come with a limited warranty. For detailed warranty information, technical support, or replacement parts, please visit the official JONSBO webсайт ё фурӯшандаи маҳаллии худ тамос гиред.
Мағозаи расмии JONSBO: Дӯкони Амазонки ҶОНСБО
