Муқаддима
This manual provides detailed instructions for the assembly, operation, and maintenance of your Vetroo AL800 Mid Tower ATX PC Computer Case. Please read this manual thoroughly before beginning installation to ensure proper setup and optimal performance.

Figure 1: Vetroo AL800 Mid Tower ATX PC Computer Case (Black)
Маълумот оид ба бехатарӣ
- Пеш аз насб кардан ё хориҷ кардани ҳама ҷузъҳо ҳамеша қувваи барқро аз васлаки деворӣ ҷудо кунед.
- Handle components with care to avoid damage from electrostatic discharge. Consider using an anti-static wrist strap.
- Keep the case and components away from liquids and excessive humidity.
- Барои пешгирӣ кардани гармии аз ҳад зиёд вентилятсияи дурустро таъмин кунед.
- Do not attempt to modify the case or its components, as this may void your warranty and pose safety risks.
Мундариҷаи баста
Боварӣ ҳосил кунед, ки ҳама ашё дар баста мавҷуд аст:
- Vetroo AL800 Mid Tower ATX PC Computer Case
- Accessory Box (screws, standoffs, cable ties)
- Pre-installed 1x 120mm PWM/ARGB Fan (rear)
- Дастури корбар (ин ҳуҷҷат)
Хусусиятҳои асосӣ
- ARGB LED Strip: Integrated LED lighting and ARGB case fans can be synchronized with compatible motherboards via a 5V 3-pin interface.
- Door Opening Design: Features a 4mm thick tempered glass side panel with a convenient door-opening mechanism for easy access to internal components.
- High Performance Airflow: A mesh front panel and strategically placed dust filters ensure optimal airflow and system cooling.
- Мутобиқати васеъ: Supports ATX, M-ATX, and ITX motherboards. Accommodates GPUs up to 340mm in length and CPU coolers up to 165mm in height.
- Дастгирии сардшавии моеъ: Front panel supports up to a 360mm liquid cooling radiator.
- Дастгирии мухлисон: Supports up to 8 x 120mm fans.
- Идоракунии кабели оддӣ: Includes two soft silicone cord grommets for organized cable routing.
- Powerful I/O Panel: Features 1x USB 3.2 Type-C port, 2x USB 3.0 ports, and a combined microphone/headphone jack.
Насб ва насб
1. General Preparation
- Қуттиро дар сатҳи ҳамвор ва устувор ҷойгир кунед.
- Open the tempered glass side panel by gently pulling it open. It is hinged for easy access.
- Remove the tempered glass panel if necessary for easier installation by lifting it off its hinges once open.

Figure 2: Tempered Glass Door Opening Design
2. Насб кардани плата
- Сипари I/O-ро (агар лозим бошад) ба кушодагии пушти корпус насб кунед.
- Align your ATX, M-ATX, or ITX motherboard with the pre-installed standoffs.
- Secure the motherboard using the provided screws from the accessory box.

Figure 3: Motherboard and Component Clearance (Max CPU Cooler Height 165mm, Max GPU Length 340mm)
3. Storage Device Installation (HDD/SSD)
- Locate the dedicated mounting points for SSDs and HDDs.
- Install 2.5" SSDs onto the SSD trays or mounting brackets.
- Install 3.5" HDDs into the drive cage located at the bottom of the case.
- Secure all drives with the appropriate screws.

Figure 4: Internal Layout with Drive Bay Locations (SSD, HDD, Power Supply)
4. Насби таъминоти барқ
- Mount your power supply unit (PSU) in the dedicated compartment at the bottom rear of the case.
- Ensure the PSU fan faces downwards (if the case has a bottom vent) or upwards, depending on your cooling preference.
- Secure the PSU with screws from the rear of the case. The case supports PSUs up to 200mm in length.
5. Expansion Card (GPU) Installation
- Remove the necessary PCI-E slot covers from the rear of the case.
- Insert your graphics card or other expansion cards into the motherboard's PCI-E slots.
- Secure the cards with screws. The case supports GPUs up to 340mm in length.
6. Cooling System Installation (Fans/Radiators)
- The case comes with one pre-installed 120mm PWM/ARGB fan at the rear.
- Additional fans (120mm or 140mm) can be installed at the front, top, and bottom.
- Liquid cooling radiators up to 360mm can be installed at the front, and up to 240mm at the top.
- Refer to the diagram for supported fan and radiator configurations.

Figure 5: Fan and Liquid Radiator Support Diagram
7. Пайвастшавӣ ба панели пеши
- Connect the front panel cables (Power, Reset, USB 3.0, USB Type-C, HD Audio) to the corresponding headers on your motherboard.
- Consult your motherboard manual for the exact pin layout of these headers.

Figure 6: Top I/O Panel Connections
8. ARGB and PWM Connections
- The pre-installed fan and ARGB LED strip require connection to your motherboard.
- Connect the 4-pin PWM connector from the fan to a compatible fan header on your motherboard for speed control.
- Connect the 3-pin ARGB connector from the fan and LED strip to a 5V 3-pin ARGB header on your motherboard for lighting synchronization. Ба сарлавҳаи 12V RGB пайваст накунед, зеро ин ба LED-ҳо зарар мерасонад.

Figure 7: PWM and ARGB Connector Details
9. Идоракунии кабел
- Utilize the cable routing cutouts and tie-down points behind the motherboard tray to organize cables.
- The soft silicone grommets help protect cables and provide a clean look.
- Proper cable management improves airflow and aesthetics.
Амалиёт
1. Фаъолсозии ибтидоӣ
- After all components are securely installed and cables connected, close the tempered glass side panel.
- Connect your monitor, keyboard, mouse, and power cable to the PC.
- Flip the power switch on your PSU to the 'ON' position.
- Press the power button on the top I/O panel of the case to start your system.
2. Идоракунии равшании ARGB
- If connected to a compatible motherboard's 5V 3-pin ARGB header, the lighting of the pre-installed fan and LED strip can be controlled via your motherboard's RGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion, ASRock Polychrome Sync).
- Refer to your motherboard's manual for specific instructions on using its ARGB control software.
3. Идоракунии ҷараёни ҳаво
- The mesh front panel is designed for optimal air intake.
- Ensure that intake fans (typically front and bottom) and exhaust fans (typically rear and top) are configured to create positive or neutral air pressure for efficient cooling and dust prevention.

Figure 8: Airflow Diagram with Dust Filters
Нигоҳдорӣ
1. Тоза кардани филтри чанг
- The case is equipped with dust filters on the top and bottom panels.
- Regularly check and clean these filters to maintain optimal airflow and prevent dust buildup inside the system.
- Gently remove the magnetic dust filters and clean them with compressed air or by rinsing with water (ensure they are completely dry before re-installation).
2. Tempered Glass Panel Care
- Clean the tempered glass panel with a soft, lint-free cloth and a non-abrasive glass cleaner.
- Avoid harsh chemicals or abrasive materials that could scratch or damage the glass.
Мушкилкушо
- Система фаъол намешавад:
- Боварӣ ҳосил кунед, ки сими барқӣ ба ҳам ба PSU ва ҳам ба розеткаи деворӣ пайваст аст.
- Verify the PSU switch is in the 'ON' position.
- Санҷед, ки сими тугмаи барқи панели пеш ба сарлавҳаи motherboard дуруст пайваст шудааст.
- Confirm all power cables (24-pin ATX, CPU, GPU) are properly seated in the motherboard and components.
- Мухлисони чарх намезананд / ARGB равшан намешавад:
- Check that the fan's PWM connector is securely plugged into a motherboard fan header.
- Verify the ARGB 3-pin connector is correctly attached to a 5V 3-pin ARGB header on the motherboard (not 12V RGB).
- Ensure your motherboard's ARGB software is installed and configured correctly.
- Портҳои USB кор намекунанд:
- Confirm the USB 3.0 and USB Type-C front panel cables are correctly connected to their respective motherboard headers.
- Check your motherboard manual for correct header locations.
- For other component-specific issues, refer to the instruction manuals for your motherboard, CPU, GPU, and other installed hardware.
Мушаххасоти
| Бренд | Ветро |
| Номи модел | AL800 |
| Рақами модели ашё | VT-CASE-AL800-BK (FBA) |
| Навъи парванда | Мандарин |
| Мутобиқати motherboard | ATX, M-ATX, ITX |
| Ранги | Сиёҳ |
| Материал | Металл, шишаи ҳароратнок |
| Вазни ашё | 12.37 фунт (тақрибан 5.61 кг) |
| Андозаҳои маҳсулот (LxWxH) | 18.4 x 8.6 x 17.9 инч (тақрибан 46.7 x 21.8 x 45.5 см) |
| Дарозии максималии GPU | 340 мм |
| Баландии максималии CPU сардтар | 165 мм |
| Дарозии максималии PSU | 200 мм |
| Портҳои I / O Front | 1x USB 3.2 Type-C, 2x USB 3.0, HD Audio (Mic/Headphone), Power, Reset |
| Дастгирии мухлисон | Front: 3x 120mm or 2x 140mm; Top: 2x 120mm or 2x 140mm; Rear: 1x 120mm; Bottom: 2x 120mm |
| Дастгирии радиатор | Front: 120/140/240/280/360mm; Top: 120/140/240mm; Rear: 120mm |
| Мухлисони пешакӣ насбшуда | 1x 120mm PWM/ARGB (Rear) |
Кафолат ва дастгирӣ
For warranty information, technical support, or to inquire about replacement parts, please visit the official Vetroo webсайт ё бевосита бо хадамоти муштариёни худ тамос гиред. Барои даъвоҳои кафолат далели хариди худро нигоҳ доред.
Official Vetroo Store: Vetroo Amazon Store
Ҳуҷҷатҳои марбут - AL800
![]() |
Дастури корбарии қуттии компютерии Vetroo AL800 Дастури корбар барои корпуси компютери Vetroo AL800, ки қадамҳои насби ҷузъҳо ба монанди motherboard, манбаи барқ, вентиляторҳо, радиаторҳои моеъ, HDD, SSD ва кортҳои графикиро муфассал шарҳ медиҳад. Дастури пайвасткунии панели вуруд/хуруҷ ва рӯйхати лавозимотро дар бар мегирад. |
![]() |
Дастури истифодабарии қуттии бозии пурраи Vetroo AL800 Full Tower Дастури мукаммали истифода барои корпуси компютерии бозикунии Vetroo AL800 Full Tower. Омӯзед, ки чӣ тавр манбаи барқ, motherboard, дискҳои нигоҳдорӣ (SSD/HDD), корти графикии худро насб кунед ва имконоти дастгирии вентилятор ва радиаторро фаҳмед. Рӯйхати лавозимот ва дастурҳои муфассали қадам ба қадамро дар бар мегирад. |
![]() |
Дастури корбар барои парвандаи Vetroo MESH-7C AL SERIES Дастури муфассали корбар барои парвандаи компютерии Vetroo MESH-7C AL SERIES, ки мушаххасот, андозаҳо, замимаҳо ва қадамҳои насби сахтафзорро барои сохтани компютери шумо фаро мегирад. |
![]() |
Дастури истифодабарии қуттии компютерии Vetroo M05 M-ATX Дастури муфассали истифода барои васл кардани корпуси компютерии Vetroo M05 M-ATX, ки насби қисмҳо, истифодаи лавозимот ва пайвастҳои панели вуруд/хуруҷро дар бар мегирад. |
![]() |
Дастури корбарии қуттии компютерии Vetroo AL900 ATX Дастури корбар барои қуттии бозикунии компютерии Vetroo AL900 ATX, тафсилоти васлкунӣ, насби ҷузъҳо ба монанди манбаи барқ ва пайвастҳои панели вуруд/хуруҷ. |
![]() |
Дастури корбар ва дастур оид ба насби Vetroo U6 CPU Cooler Дастури муфассали корбар ва дастури насб барои Vetroo U6 CPU Cooler, ки мутобиқатро бо Intel LGA 1700/1200/115X ва розеткаҳои AMD AM5/AM4/AM3(+)/AM2(+)/FM2(+)/FM1 фаро мегирад. Рӯйхати қисмҳо ва дастурҳои қадам ба қадам васлкуниро дар бар мегирад. |





