1. Муқаддима
This manual provides detailed instructions for the ID-COOLING FROZN A410 ARGB White CPU Cooler. This high-performance air cooler is designed to provide efficient heat dissipation for your CPU, featuring 4 copper heat pipes, a 120mm Fluid Dynamic Bearing (FDB) fan, and vibrant Addressable RGB (ARGB) lighting. It offers excellent compatibility with various RAM modules due to its single tower design.
Хусусиятҳои асосӣ:
- Пардохти гармии самаранок: Equipped with 4 heat pipes and a 120mm FDB fan for optimal CPU cooling.
- Vibrant ARGB Lighting: Integrated ARGB lighting on the top cover and fan for customizable visual effects.
- RAM Compatibility: Single tower design ensures perfect compatibility with various RAM configurations.
- Фанҳои динамикии подшипникҳои моеъ: Provides longer lifespan, quieter operation, reduced vibration, and improved efficiency.
Видео 1: Introducing the ID-COOLING FROZN A410 ARGB White CPU Cooler. This video provides a visual overview of the cooler's design and ARGB lighting effects within a PC build.
2. Танзим ва насб
Before beginning installation, ensure your system is powered off and unplugged. Refer to your motherboard manual for specific CPU socket details. The ID-COOLING FROZN A410 ARGB White CPU Cooler supports Intel LGA1700/1851/1200/115X and AMD AM4/AM5 sockets.
Видео 2: Detailed installation guide for FROZN Single Tower Series coolers on various Intel and AMD platforms. This video demonstrates the step-by-step process for mounting the cooler.
2.1. Компонентҳои дохилшуда
Verify all components are present before installation:
- Heatsink with 4 heat pipes
- Фатили 120мм ARGB
- Intel Backplate (for LGA1700/1200/115X)
- Intel Brackets
- AMD Brackets
- Винтҳо ва гайкаҳои васлкунӣ
- Rubber Spacers (Black for Intel LGA1700, Grey for Intel LGA1200/115X, Red for AMD)
- Солидории гармӣ
Тасвири 1: Барview of the mounting hardware included with the FROZN A410 ARGB White CPU Cooler, showing components for both Intel and AMD platforms.
2.2. Intel LGA1700/1851/1200/115X Installation
- Табақи пуштиро омода кунед: For LGA1700, move the screws of the Intel Backplate to the outermost position. For LGA1200/115X, move them to the innermost position. Install the backplate on the back of the motherboard.
- Install Spacers: Place the appropriate rubber spacers (Black for LGA1700, Grey for LGA1200/115X) onto the backplate screws protruding through the motherboard.
- Қавсҳои бехатар: Place the Intel mounting brackets on top of the spacers, aligning them with the CPU socket. Secure with the tightening nuts.
- Хамираи гармиро татбиқ кунед: Clean the CPU surface thoroughly. Apply a small amount of thermal paste (included) to the center of the CPU.
- Mount Heatsink: Remove the protective sticker from the heatsink base. Carefully place the heatsink onto the CPU, aligning the mounting holes with the bracket screws. Tighten the screws in a diagonal pattern until secure.
- Вентиляторро пайваст кунед: Use the provided fan clips to secure the 120mm ARGB fan to the heatsink. Ensure the fan is oriented to blow air through the heatsink fins towards the rear of the case.
- Кабелҳои пайвастшавӣ: Connect the 4-pin PWM fan cable to the CPU_FAN header on your motherboard. Connect the ARGB cable to a compatible 3-pin 5V ARGB header on your motherboard or ARGB controller.
2.3. Насби AMD AM4/AM5
Шарҳ: The original backplate of your AMD motherboard is required for installation.
- Remove Stock Retention: Remove the plastic retention module from the motherboard, but keep the stock metal backplate.
- Install Spacers: Place the red AMD standoffs onto the backplate screws.
- Қавсҳои бехатар: Place the AMD mounting brackets on top of the standoffs, aligning them with the CPU socket. Secure with the tightening screws.
- Хамираи гармиро татбиқ кунед: Clean the CPU surface thoroughly. Apply a small amount of thermal paste (included) to the center of the CPU.
- Mount Heatsink: Remove the protective sticker from the heatsink base. Carefully place the heatsink onto the CPU, aligning the mounting holes with the bracket screws. Tighten the screws in a diagonal pattern until secure.
- Вентиляторро пайваст кунед: Use the provided fan clips to secure the 120mm ARGB fan to the heatsink. Ensure the fan is oriented to blow air through the heatsink fins towards the rear of the case.
- Кабелҳои пайвастшавӣ: Connect the 4-pin PWM fan cable to the CPU_FAN header on your motherboard. Connect the ARGB cable to a compatible 3-pin 5V ARGB header on your motherboard or ARGB controller.
3. Амалиёт
The ID-COOLING FROZN A410 ARGB White CPU Cooler is designed for optimal performance and aesthetics.
3.1. Fan Control (PWM)
The 120mm FDB fan is a Pulse Width Modulation (PWM) fan, allowing your motherboard to dynamically control its speed based on CPU temperature. This ensures efficient cooling when needed and quiet operation during lighter loads. You can configure fan curves through your motherboard's BIOS/UEFI settings or dedicated software provided by your motherboard manufacturer.
Тасвири 2: Diagram illustrating the Fluid Dynamic Bearing (FDB) technology used in the fan, highlighting its benefits for longevity and quiet operation.
Тасвири 3: Visual representation of the fan's performance metrics, including airflow (78 CFM), noise level (29.9 dB(A) Max), and air pressure (2.68mmH2O Max).
3.2. Идоракунии равшании ARGB
The Addressable RGB (ARGB) lighting on the fan and top cover can be controlled via your motherboard's ARGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, GIGABYTE RGB Fusion, ASRock Polychrome Sync) or a dedicated ARGB controller (if connected). Ensure the ARGB cable is properly connected to a 3-pin 5V ARGB header.
Тасвири 4: The FROZN A410 ARGB White CPU Cooler showcasing its vibrant ARGB lighting when installed in a white PC case.
4. Нигоҳдорӣ
Regular maintenance ensures optimal performance and longevity of your CPU cooler.
- Тоза кардани хок: Periodically clean dust from the heatsink fins and fan blades using compressed air or a soft brush. Ensure the fan is not spinning during cleaning to prevent damage.
- Хамираи гармидиҳӣ: Reapply thermal paste every 1-2 years, or if the cooler is removed and reinstalled. Ensure the CPU and heatsink surfaces are clean before applying new thermal paste.
- Санҷиши вентилятор: Симҳои вентиляторро барои пайвастҳои боэътимод тафтиш кунед ва боварӣ ҳосил кунед, ки парҳои вентилятор аз монеаҳо холӣ ҳастанд.
5. Баррасии мушкилот
If you encounter issues with your CPU cooler, refer to the following common solutions:
| Мушкилот | Сабаби эҳтимолӣ | Ҳалли |
|---|---|---|
| Аз ҳад зиёд гарм шудани CPU | Improper thermal paste application, loose heatsink, insufficient airflow, dust buildup. | Reapply thermal paste, ensure heatsink is securely mounted, clean heatsink and fan, check case airflow. |
| Фан чарх намезанад | Fan cable disconnected, faulty fan header, fan failure. | Check 4-pin PWM connection to CPU_FAN header, try a different fan header, replace fan if faulty. |
| Равшании ARGB кор намекунад | ARGB cable disconnected, incompatible ARGB header (e.g., 4-pin 12V instead of 3-pin 5V), software issue. | Check 3-pin 5V ARGB connection, ensure correct header type, update/reinstall motherboard ARGB software. |
| Садои аз ҳад зиёди мухлисон | Fan speed too high, dust buildup, faulty fan bearing. | Adjust fan curve in BIOS/UEFI, clean fan, replace fan if bearing is faulty. |
6. Мушаххасоти
| Хусусият | Тафсилот |
|---|---|
| Андозаҳои маҳсулот | 4.72"L x 0.98"W x 4.72"H (Fan only) |
| Cooler Height | 152мм (6 инч) |
| Усули хунуккунӣ | Ҳаво |
| Қубурҳои гармидиҳӣ | 4 x Φ6mm Copper Heat Pipes |
| Андозаи тарофаҳо | 120х120х25мм |
| Навъи подшипник | Подшипникҳои динамикии моеъ (FDB) |
| Суръати максималии гардиш | 2000 чархзании |
| Иқтидори ҷараёни ҳаво | 78 фут мукааб дар як дақиқа (CFM) |
| Сатҳи садо | 29.9 Децибел (максимум) |
| Намуди пайвасткунандаи барқ | 4-Pin PWM |
| Ҷилдиtage | 12 вольт |
| Ватtage | 5.64 ватт |
| TDP (Қувваи тарроҳии гармӣ) | 220 Вт |
| Дастгоҳҳои мувофиқ | Desktop CPUs |
| Сокетҳои дастгирӣшаванда | Intel LGA1700/1851/1200/115X; AMD AM4/AM5 |
| Материал | Copper, Metal/Aluminum, Plastic/Rubber, Resin |
| Вазни ашё | 2.33 фунт |
| Дар қуттӣ чӣ ҳаст | Heatsink, Cooling Fan, Mounting Hardware, Thermal Grease |
Тасвири 5: Illustration of the 4 direct contact heatpipes, showing how they efficiently transfer heat from the CPU.
Тасвири 6: Diagram highlighting the cooler's design for perfect memory compatibility, ensuring clearance for RAM modules.
Тасвири 7: The ID-COOLING FROZN A410 ARGB White CPU Cooler, emphasizing its aesthetic appeal.
7. Кафолат ва дастгирӣ
For warranty information and technical support, please refer to the official ID-COOLING webсайт ё бо хидмати мизоҷони худ тамос гиред. Квитансияи хариди худро ҳамчун далели харид барои ҳама даъвоҳои кафолат нигоҳ доред.
Манбаъҳои онлайн: ID-COOLING Store on Amazon
