Diyeeni Digital FM Stereo Transmitter Module

1. Муқаддима

This manual provides comprehensive instructions for the Diyeeni Digital FM Stereo Transmitter Module, model Diyeenifk6duhizy9. It covers essential information regarding product setup, operation, technical specifications, and troubleshooting to ensure optimal performance and safe use of your device.

Маълумот оид ба бехатарӣ

• Do not plug the transmitter directly into a microphone. If a microphone amplifier is used, the amplified microphone can be fed into the transmitter.
• Дар бораи дахолати эҳтимолӣ ба дигар дастгоҳҳои бесим огоҳ бошед.
• Always follow local regulations regarding FM transmission frequencies and power levels.

2. Мундариҷаи баста

Лутфан тасдиқ кунед, ки ҳама ашё дар бастаи шумо мавҷуданд:

• 1 x Diyeeni FM Transmitter Module
• 1 x Antenna (typically included)
• 1 x USB Type-C Power Cable (typically included)

3. Маҳсулот ба охир расидview

The Diyeeni Digital FM Stereo Transmitter Module is designed for broadcasting stereo audio over FM frequencies. It features a robust aluminum alloy construction, an LCD screen for frequency display, and intuitive control buttons.

Расми 3.1: Пеш view of the Diyeeni FM Transmitter Module.

Компонентҳои асосӣ:

• Намоиши LCD: Shows current frequency and power settings.
• DW (Down) Button: Decreases frequency or navigates settings.
• UP (Up) Button: Increases frequency or navigates settings.
• Вуруди аудио 3.5 мм: Standard stereo audio input connector.
• Порти USB Type-C: For 5V DC power supply.
• Пайвасткунаки антенна: Барои пайваст кардани мавҷгири берунии FM.

Расми 3.2: Наздик view of the 3.5mm audio input and USB-C power port.

4. Танзимот

Follow these steps to set up your FM transmitter:

1. Антеннаро пайваст кунед: Securely attach the provided antenna to the antenna connector on the module.
2. Пайваст кардани манбаи аудио: Plug your stereo audio source (e.g., MP3 player, computer) into the 3.5mm audio input jack using a standard 3.5mm audio cable.
3. Пайваст кардани барқ: Connect the USB Type-C power cable to the module's USB-C port and plug the other end into a 5V DC power source (e.g., USB wall adapter, power bank). The device will power on automatically.

5. Дастурҳои истифодабарӣ

This section details how to operate your FM transmitter.

Figure 5.1: The transmitter displaying output frequency information. Note: The operating range is 88-108MHz as per specifications, though some images may indicate 76-108MHz.

5.1 Фаъол кардан/хомӯш кардан

The transmitter powers on automatically when a 5V USB Type-C power source is connected. To power off, disconnect the USB-C power cable.

5.2 Танзими басомад

-ро истифода баред DW (Поён) ва UP buttons to adjust the transmission frequency. The current frequency will be displayed on the LCD screen.

Figure 5.2: LCD screen displaying the current transmission frequency (e.g., 96.6 MHz).

• Fine Tuning (0.1MHz steps): When the small LED indicator is off, pressing DW or UP adjusts the frequency by 0.1MHz.
• Coarse Tuning (1MHz steps): When the small LED indicator is lit, pressing DW or UP adjusts the frequency by 1MHz.
• Toggle Tuning Step: To switch between fine and coarse tuning, press and hold the DW тугмаро тақрибан 3 сония пахш кунед.

5.3 Transmit Power Adjustment

You can adjust the output power of the transmitter:

• -ро пахш карда нигоҳ доред UP button for approximately 3 seconds. The LCD will display a power level, such as "P01" (lowest power) up to "P10" (highest power).
• -ро истифода баред DW ва UP buttons to select your desired power level.
• After a few seconds of no button presses, the selected power setting will be saved, and the display will revert to showing the current frequency.

Расми 5.3: Наздик view of the DW and UP control buttons.

5.4 Вуруди аудио

Ensure your audio source is providing a stereo signal through the 3.5mm connector. The transmitter is designed for line-level audio input. As noted in the safety information, direct microphone input is not supported without an external ampлифер.

Figure 5.4: The transmitter is compatible with any ordinary radio capable of receiving FM broadcasts.

6. Мушаххасоти

7. Баррасии мушкилот

If you encounter issues with your FM transmitter, refer to the following common problems and solutions:

• No Transmission or Weak Signal:
  • Ensure the antenna is securely connected.
  • Verify the USB-C power supply is active and providing sufficient power.
  • Adjust the transmit power level to a higher setting (e.g., P10) as described in Section 5.3.
  • Select a clear FM frequency in your area that is not used by local radio stations.
• Poor Audio Quality or Static:
  • Check the 3.5mm audio input cable for secure connections at both the transmitter and the audio source.
  • Ensure your audio source is providing a clean, unamplified stereo signal.
  • Try adjusting the frequency slightly to avoid interference from other signals.
• Дастгоҳ фаъол нест:
  • Confirm that the USB-C power cable is fully inserted into both the transmitter and the power source.
  • Test the USB-C cable and power adapter with another device to ensure they are functional.

8. Нигоҳдорӣ

To ensure the longevity and proper functioning of your Diyeeni FM Transmitter Module:

• Keep the device in a dry environment and protect it from moisture.
• Беруни онро бо матои нарм ва хушк тоза кунед. Аз истифодаи маводи кимиёвии сахт ё маводҳои абразивӣ худдорӣ намоед.
• Дастгоҳро дар муддати тӯлонӣ ба ҳарорати аз ҳад зиёд ё нури бевоситаи офтоб дучор накунед.
• Do not attempt to disassemble or modify the unit, as this will void any warranty and may cause damage.

9. Кафолат ва дастгирӣ

For warranty information, technical assistance, or customer support, please refer to the seller's policies or contact Diyeeni customer service through the retailer where the product was purchased. Please have your model number (Diyeenifk6duhizy9) and purchase details ready when seeking support.