Муқаддима
This manual provides detailed instructions for the safe installation, operation, and maintenance of your BESTTEN 3-Way Decorator Wall Light Switch. Please read all instructions carefully before beginning installation and retain this manual for future reference.
The BESTTEN 3-Way Decorator Wall Light Switch is designed for both residential and commercial applications. It features a modern rocker paddle design and can be used in single-pole or three-way circuits, allowing control of lights from one or two locations.
Хусусиятҳои асосӣ:
- 3-Way Functionality: Controls lights from two locations, or can be used as a single-pole switch.
- Насби осон: Offers quick push-in and side wiring options.
- Сохтмони устувор: Crafted from impact-resistant polycarbonate thermoplastic and solid steel.
- Тарҳрезии замонавӣ: Sleek decorator style with a smooth rocker paddle action.
- Рӯйхати UL: Барои стандартҳои бехатарӣ ва сифат сертификатсия шудааст.
Маълумот оид ба бехатарӣ
WARNING: RISK OF ELECTRIC SHOCK. Improper installation can result in serious injury or death.
- Always turn off power at the circuit breaker or fuse box before wiring.
- Боварӣ ҳосил кунед, ки ҳама пайвастҳои ноқилҳо бехатаранд ва ба кодексҳои барқии маҳаллӣ мувофиқанд.
- Агар шумо ба ягон қисми ин дастурҳо боварӣ надошта бошед, ба электрики ботаҷриба муроҷиат кунед.
- Do not use this switch with loads exceeding its specified rating (15A, 120V/277V).
- This device is intended for installation in accordance with the National Electrical Code (NEC) and local regulations.
Компонентҳо дохил карда шудаанд
- BESTTEN 3-Way Decorator Wall Light Switch(es)
- Виддаҳои васлкунӣ
- Decorator Wallplate(s)
Мушаххасоти
| Бренд | БЕХТАРИН |
| Модели | B0F997XHTW |
| Режими амалиёт | ХОМӮШ НАБУД |
| Рейтинги ҷорӣ | 15 Amps |
| Ҷилди амалиётӣtage | 120 Volts / 277 Volts |
| Навъи тамос | Нигоҳдорӣ |
| Навъи пайвасткунанда | Бурида |
| Терминал | Бурида |
| Навъи схема | 3-роҳ |
| Маводи тамос | биринҷӣ |
| Андозаҳои маҳсулот | 4.53 x 2.91 x 1.28 инч |
Figure 1: Dimensions of the BESTTEN 3-Way Decorator Wall Light Switch.
Насбкунӣ
Воситаҳои зарурӣ:
- Отвертка (Филлипс ва/ё Флэтхед)
- Стрипперҳои сим
- Лентаи барқӣ (ихтиёрӣ)
- ҶилдиtagОзмоишгари электронӣ (тавсия дода мешавад)
Дастурҳои пайвастшавӣ:
- Хомӯш кардани барқ: Locate the circuit breaker or fuse that controls the switch you are replacing or the circuit where you are installing the new switch. Turn it OFF. Verify power is off using a voltagсанҷанда
- Калиди кӯҳнаро хориҷ кунед (агар лозим бошад): Carefully remove the wallplate and unscrew the old switch from the electrical box. Disconnect the wires, noting their connections.
- Муайян кардани симҳо:
- Hot/Line Wire (Black Screw): This wire brings power to the switch.
- Load Wire (Black Screw): This wire carries power from the switch to the light fixture.
- Traveler Wires (Brass Screws): For 3-way circuits, these wires connect the two 3-way switches. There will be two traveler wires.
- Ground Wire (Green Screw): This is the safety ground wire, typically bare copper or green insulated.
- Connect Wires to New Switch: The BESTTEN 3-Way switch offers both side wiring (screw terminals) and quick push-in wiring (for 14 AWG solid copper wire only).
- Connect the ground wire to the green screw terminal.
- Connect the hot/line and load wires to the black screw terminals.
- Connect the two traveler wires to the brass screw terminals.
Расми 2: Бозгашт View of Switch with Wiring Terminals.
- Secure the Switch: Gently fold the wires into the electrical box. Mount the switch to the electrical box using the provided screws.
- Пластинаи деворро насб кунед: Attach the decorator wallplate over the switch.
- Барқарор кардани қудрат: Қувваи барқро дар автомати автоматӣ аз нав фаъол созед.
- Санҷиш: Test the switch to ensure proper operation.
Understanding a 3-Way Circuit:
A 3-way circuit allows a single light fixture or group of fixtures to be controlled from two different switch locations. This is common in stairwells, long hallways, or large rooms with multiple entrances. The BESTTEN 3-Way switch is designed to function in such circuits.
Figure 3: Typical 3-Way Wiring Diagram.
Расми 4: Мисample of a 3-Way Circuit Application.
Амалиёт
The BESTTEN 3-Way Decorator Wall Light Switch operates with a simple rocker paddle mechanism. Press the top of the paddle to turn the connected lights ON, and press the bottom of the paddle to turn them OFF.
Figure 5: Installed Switch in Use.
Нигоҳдорӣ
Your BESTTEN 3-Way Decorator Wall Light Switch requires minimal maintenance. To clean, ensure power is off at the circuit breaker, then wipe the surface with a soft, damp матоъ. Тозакунанда ё ҳалкунандаҳои абразивиро истифода набаред.
Мушкилкушо
- Light does not turn ON/OFF:
- Check the circuit breaker to ensure power is ON.
- Verify all wire connections are secure and correctly wired according to the diagrams in this manual.
- Ensure the light bulb is functional.
- Switch feels loose:
- Қувваи барқро дар ноқил хомӯш кунед.
- Remove the wallplate and tighten the mounting screws that secure the switch to the electrical box.
Дастгирии муштариён
For technical assistance, warranty information, or any questions not covered in this manual, please contact BESTTEN customer support. Refer to the product packaging or the official BESTTEN webсайт барои маълумот барои тамос.
