1. Маҳсулот ба охир расидview
The Hantek DSO4084B is a versatile 4-channel digital storage oscilloscope designed for precise electrical testing and measurement. It offers a bandwidth of 80MHz, a minimum range of 500µV/div, and a 1GS/s sample rate, making it suitable for a wide array of applications.
Хусусиятҳои асосӣ инҳоянд:
- 4 channels with EXT and DVM auto-range function.
- Over 32 types of automatic measurement functions.
- Advanced digital trigger system with high sensitivity.
- More than 14 types of trigger functions, including edge, overtime, pulse, pattern, and interval.
- Serial bus triggering and decoding for intuitive protocol information display.
- Integrated USB Host/Device for PC communication and U-stick storage/system updates.
- Support for SCPI remote control commands.
- Optional RS232 and LAN ports for enhanced connectivity.
Figure 1: Hantek DSO4084B 4-Channel Digital Storage Oscilloscope with its display and control panel.
2. Дастури насб
Follow these steps to set up your Hantek DSO4084B oscilloscope:
- Кушодани: Carefully remove the oscilloscope and all accessories from the packaging. Verify all components are present against the packing list.
- Пайвасти барқ: Connect the power adapter to the oscilloscope's power input and then to a suitable power outlet.
- Пайвастшавии зонд: Connect the oscilloscope probes to the BNC input channels (CH1, CH2, CH3, CH4) as needed for your measurements. Ensure a secure connection.
- Фаъол: Press the power button located on the front panel to turn on the oscilloscope. The device will perform a self-test and display the Hantek logo.
- Намоиши ибтидоӣ: Upon startup, Channel 1 (CH1) will typically be active, displaying a horizontal line.
Figure 2: The Hantek DSO4084B oscilloscope shown with its packaging and various accessories, including probes and cables.
Наќшаи 3: Муфассал view of the Hantek DSO4084B oscilloscope and its complete set of accessories, including multiple probes and power cables.
Video 1: This video demonstrates the initial setup and basic operation of a Hantek DSO4000B series oscilloscope, including connecting power, turning on the device, adjusting channel settings, using auto-setup, performing automatic measurements, and adjusting coupling and time base.
3. Дастурҳои истифодабарӣ
The Hantek DSO4084B offers intuitive controls for various measurement tasks.
3.1. Basic Waveform Adjustment
- Танзими ҷилдtage: Use the vertical scale knobs (labeled "Vertical") for each channel to adjust the voltage per division (V/div). The button next to the knob allows for fine-tuning the voltage.
- Adjusting Waveform Position: Use the position knobs for each channel to move the waveform vertically on the screen.
- Enabling Multiple Channels: All four channels can be activated simultaneously. Use the dedicated buttons for each channel (CH1, CH2, CH3, CH4) to toggle them on or off. Adjust voltage and position for each active channel independently.
- Танзимоти худкор: -ро пахш кунед АВТО button to automatically adjust the oscilloscope settings for a stable waveform display. For example, when measuring a DC 5V signal, the auto function might set the display to 2V per division.
3.2. Функсияҳои андозагирӣ
The oscilloscope provides extensive measurement capabilities:
- Андозагирии автоматӣ: Access over 32 types of automatic measurements by pressing the MEAS button. This displays parameters like Vpp (peak-to-peak voltage), Vmax, Vmin, frequency, period, and more. Pressing MEAS again will hide the measurement results.
- Системаи триггер: Utilize the advanced digital trigger system with over 14 types of trigger functions (edge, overtime, pulse, pattern, interval, etc.) to capture specific events.
- Рамзкунии автобуси силсилавӣ: For serial bus protocols, the device can quickly and intuitively display bus protocol information in table form.
3.3. Coupling Settings (DC/AC)
To accurately measure different signal types, adjust the coupling setting:
- DC Coupling: Select DC coupling (usually via a menu accessed by a function button like F1) to measure both AC and DC components of a signal.
- Пайвастшавии AC: Select AC coupling to block the DC component and only display the AC component of a signal. This is useful for observing small AC signals superimposed on a large DC offset.
- Маҳдудияти фарохмаҷро: The oscilloscope features a 20MHz bandwidth limit option (e.g., BW 20M). Activating this can help remove high-frequency noise or unwanted signals above 20MHz, providing a cleaner waveform for analysis.
- Adjusting Time Base: Use the horizontal scale knob (labeled "Horizontal") to adjust the time per division (s/div) to view more or less of the waveform horizontally.
Figure 4: The oscilloscope display showing multiple active channels with distinct waveforms, demonstrating its multi-channel capability.
4. Нигоҳдорӣ
Proper maintenance ensures the longevity and accuracy of your Hantek DSO4084B oscilloscope:
- Тозакунӣ: Regularly clean the exterior of the oscilloscope with a soft, dry cloth. For stubborn dirt, use a slightly damp cloth with mild detergent. Avoid abrasive cleaners or solvents.
- Нигоҳубини экран: Use a soft, lint-free cloth specifically designed for electronics screens to clean the display. Do not press hard or use harsh chemicals.
- Вентилятсия: Боварӣ ҳосил кунед, ки сӯрохиҳои вентилятсия аз чанг ва монеаҳо тоза бошанд, то аз ҳад зиёд гармшавиро пешгирӣ кунанд.
- Нигоҳдорӣ: When not in use, store the oscilloscope in a clean, dry environment away from direct sunlight, extreme temperatures, and excessive humidity.
- Нигоҳубини санҷиш: Handle probes carefully. Avoid bending or stressing the cables. Store them properly to prevent damage to the tips and connectors.
- Калибрченкунӣ: For critical measurements, periodic calibration by a qualified service center is recommended to maintain accuracy.
5. Баррасии мушкилот
Ин бахш роҳҳои ҳалли мушкилоти маъмулеро, ки шумо метавонед дучор ояд, пешниҳод мекунад:
| Мушкилот | Сабаби эҳтимолӣ | Ҳалли |
|---|---|---|
| Не қудрат | Power cable not connected, power outlet faulty, power switch off. | Check power cable connection, try a different outlet, ensure power switch is on. |
| Шакли мавҷ нишон дода нашудааст | Input signal absent, probe not connected, channel off, incorrect vertical/horizontal settings. | Verify signal source, check probe connection, activate channel, use AUTO button or manually adjust V/div and s/div. |
| Шакли мавҷи ноустувор | Incorrect trigger settings, noisy signal. | Adjust trigger level and mode. Consider using the 20MHz bandwidth limit to reduce noise. |
| Андозагирии нодуруст | Improper probe attenuation setting, uncalibrated device. | Ensure probe attenuation (e.g., 1X, 10X) matches the oscilloscope setting. Consider professional calibration. |
6. Мушаххасоти
Below are the detailed specifications for the Hantek DSO4084B oscilloscope:
- Модели: DSO4084B
- Каналҳо: 4
- Паҳнои маҷрои: 80 МГц
- SampНарх: 1ГС/с
- Диапазони ҳадди аққал: 500µV/div
- Auto Measurement Functions: Over 32 types
- Trigger Functions: Over 14 types (edge, overtime, pulse, pattern, interval, etc.)
- Пайвастшавӣ: Integrated USB Host/Device, optional RS232 port, LAN port
- Намоиш: 7-inch 64K Color TFT
- Андозаҳои маҳсулот: 8.27 x 4.33 x 6.3 инч
- Вазни ашё: 3.3 фунт
- Батареяҳо: 1 батареяи литий металлӣ лозим аст (дохил карда шудааст)
- Истеҳсолкунанда: Hantek Qingdao
- Санаи аввалин дастрас: 26 феврали соли 2024
Figure 5: A table detailing the different models within the Hantek DOS4000B series, including their channels, bandwidth, sample rate, and AFG capabilities.
Figure 6: A comprehensive table outlining the detailed technical specifications for various Hantek DOS4000B series oscilloscopes, covering aspects like vertical, horizontal, and trigger settings.
7. Кафолат ва дастгирӣ
For warranty information and technical support, please refer to the official Hantek webсайт ё дилери ваколатдори худ тамос гиред. Квитансияи хариди худро ҳамчун далели харид барои даъвоҳои кафолат нигоҳ доред.
Additional protection plans may be available for extended coverage. Please check with your retailer for details.
