Karlsson Spry Square LED Alarm Clock Instruction Manual

1. Маҳсулот ба охир расидview

The Karlsson Spry Square LED Alarm Clock (Model KA5982GY) is a compact digital alarm clock designed for clear time display and reliable alarm functionality. This manual provides detailed instructions for its setup, operation, and maintenance.

Расми 1: Пеш view of the Karlsson Spry Square LED Alarm Clock, showing the time display.

2. Мундариҷаи баста

• Karlsson Spry Square LED Alarm Clock (Model KA5982GY)
• USB Power Cable (DC 5V)
• Дастури дастурӣ

Note: Batteries (if required for backup) and a USB power adapter are typically not included and must be purchased separately.

3. Танзимот

3.1 Таъмини барқ

The alarm clock can be powered via a DC 5V USB connection or by batteries for backup. For continuous operation, it is recommended to use the USB power cable.

1. Пайваст кардани қувваи USB: Insert the small end of the provided USB cable into the DC 5V port on the back of the alarm clock. Connect the larger end to a USB power adapter (not included) or a powered USB port.
2. Install Batteries (Optional Backup): Open the battery compartment cover on the back of the clock. Insert the appropriate batteries (e.g., AAA, type not specified, refer to compartment markings) ensuring correct polarity (+/-). Close the cover securely. Batteries provide backup power in case of a power outage, preserving time settings.

Расми 2: Бозгашт view of the alarm clock, highlighting the DC 5V input, battery compartment, and control buttons (SET, UP, DOWN, RST).

3.2 Танзими вақти ибтидоӣ

Upon first power-up or after a full power reset, the display may show a default time or flash. Follow these steps to set the current time:

1. -ро пахш карда нигоҳ доред САТ тугмаи қафои соатро то он даме ки рақамҳои соат милт-милт кунанд, пахш кунед.
2. -ро истифода баред UP ва ПОЁН тугмаҳо барои танзими соат.
3. -ро пахш кунед САТ button again to confirm the hour and move to the minute setting. The minute digits will flash.
4. -ро истифода баред UP ва ПОЁН тугмаҳо барои танзими дақиқаҳо.
5. -ро пахш кунед САТ Барои тасдиқи дақиқаҳо ва баромадан аз ҳолати танзимкунии вақт тугмаро бори дигар пахш кунед.

4. Дастурҳои истифодабарӣ

4.1 Танзими ҳушдор

Барои насб кардани ҳушдор:

1. Аз намоиши вақти муқаррарӣ, тугмаи САТ button once (do not hold). The display will show the current alarm time or 'OFF'.
2. Ҳангоме ки вақти ҳушдор намоиш дода мешавад, -ро пахш карда нигоҳ доред САТ тугмаро то он даме, ки рақамҳои соати ҳушдор дурахшиданд, пахш кунед.
3. -ро истифода баред UP ва ПОЁН тугмаҳо барои танзими соати ҳушдор.
4. пахш кунед САТ again to confirm the alarm hour and move to the alarm minute setting.
5. -ро истифода баред UP ва ПОЁН тугмаҳо барои танзими дақиқаҳои ҳушдор.
6. пахш кунед САТ one more time to confirm the alarm minutes and activate the alarm. An alarm indicator (e.g., a small bell icon or dot) should appear on the display.

4.2 Turning the Alarm On/Off

To toggle the alarm on or off without changing the set time:

1. Аз намоиши вақти муқаррарӣ, тугмаи САТ button once to show the alarm time.
2. Ҳангоме ки вақти ҳушдор намоиш дода мешавад, -ро пахш кунед UP or ПОЁН button to toggle the alarm function on or off. The alarm indicator will appear or disappear accordingly.

4.3 Функсияи таъхир

When the alarm sounds, press any button (other than RST or the main power button if present) to activate the snooze function. The alarm will temporarily stop and sound again after a few minutes (typical snooze duration is 5-9 minutes, specific duration not provided). The snooze indicator may flash on the display.

4.4 Қатъи ҳушдор

To stop the alarm completely when it is sounding, press the RST button or unplug the power. The alarm will reset for the next day at the set time.

5. Нигоҳдорӣ

5.1 Тозакунӣ

To maintain the appearance of your alarm clock:

• Сатҳи онро бо матои мулоим ва хушк пок кунед.
• Барои аломатҳои якрав, сабук гampАз истифодаи тозакунандаҳои абразивӣ, ҳалкунандаҳо ё дорупошакҳои кимиёвӣ худдорӣ кунед, зеро онҳо метавонанд ба рӯйпӯш зарар расонанд.
• Ensure no liquid enters the device through openings.

5.2 Иваз кардани батарея

If using batteries for backup, replace them when the display becomes dim or if the clock loses time during power outages. Refer to section 3.1 for battery installation instructions.

6. Баррасии мушкилот

• Дисплей холӣ ё хира аст:
  - Ensure the USB power cable is securely connected to both the clock and a working power source.
  - If using batteries, check if they are correctly installed and not depleted. Replace if necessary.
• Clock loses time:
  - If powered by USB, ensure a stable power supply.
  - If relying on battery backup, replace the batteries.
• Сигнал садо намедиҳад:
  - Verify that the alarm is set and activated (check for the alarm indicator on the display). Refer to section 4.1 and 4.2.
  - Ensure the volume is not set to zero (if applicable, though this model typically has a fixed alarm sound).
• Тугмаҳо ҷавоб намедиҳанд:
  - Try pressing the RST button on the back with a thin object (like a paperclip) to perform a soft reset. This may clear temporary issues without losing settings if backup batteries are present.
  - Disconnect and reconnect the power supply.

7. Мушаххасоти

8. Кафолат ва дастгирӣ

Warranty information for the Karlsson Spry Square LED Alarm Clock is typically provided at the point of purchase or included with the product packaging. Please retain your proof of purchase for warranty claims.

For technical support, service, or further inquiries, please contact Karlsson customer service directly through their official webсайт ё фурӯшандае, ки аз он маҳсулот харида шудааст.