1. Муқаддима
Thank you for choosing the EazeID D210S Label Maker. This portable device is designed for efficient and versatile labeling, suitable for various environments including home, office, and school. Featuring a user-friendly QWERTY keyboard and dual power options, it produces durable, laminated labels resistant to water, abrasion, fading, and temperature changes.
This manual provides detailed instructions on how to set up, operate, and maintain your label maker to ensure optimal performance and longevity.
2. Танзимот
2.1. Мундариҷаи баста
Пеш аз оғози кор, лутфан тафтиш кунед, ки ҳама ашё дар бастаи шумо мавҷуданд:
- EazeID D210S Gray label maker (1 unit)
- Sample label tape waterproof (12mm 0.47 laminated White, 4M) (1 unit)
- Сими навъи C (1 адад)
- Дастури корбар (1 адад)
Image: Contents of the EazeID D210S Label Maker package, including the device, sample tape, Type-C cable, and manual.
2.2. Таъмини барқ
The EazeID D210S label maker offers two power options:
- Сими USB Type-C: Connect the included Type-C cable to the label maker and a compatible power adapter (not included). The device does not support charging via Type-C; it operates directly from the power source.
- Батареяҳои AAA: For portable use, insert 6 AAA batteries (not included) into the battery compartment located on the underside of the device. Ensure correct polarity.
Шарҳ:
- It is recommended to use a charger block with an output voltage of ±5V when using the Type-C cable.
- Do not leave batteries in the printer when it is powered by the USB Type-C cable.
Image: Illustration of the label maker's dual power options: USB Type-C for continuous power and AAA batteries for portability.
2.3. Installing Label Tape
To install the label tape:
- Сарпӯши қисмати лентаро дар қафои дастгоҳи тамғагузорӣ кушоед.
- Insert the label tape cassette with the tape facing the print head. Ensure the tape is properly aligned and clicks into place.
- Сарпӯши қисмати лентаро бехатар пӯшед.
Image: The label maker with its tape compartment open, illustrating the tape installation area and the integrated cutter.
3. Дастурҳои истифодабарӣ
3.1. Эҷоди нишони асосӣ
Follow these steps to create a basic label:
- Фаъол: Тугмаи барқро пахш кунед, то тавлидкунандаи тамғаро фаъол созед.
- Вуруди клавиатура: Use the QWERTY keyboard to type your desired text. The text will appear on the LCD screen.
- Чоп кардан: -ро пахш кунед Чоп кардан тугмаи барои чоп кардани тамғакоғаз.
Image: A visual guide demonstrating the simple three-step process to operate the label maker.
3.2. Text Formatting and Special Functions
The D210S label maker includes a variety of built-in functions to customize your labels:
- Услубҳои шрифт: Access 16 font styles using the dedicated Шрифт калид.
- Аломатҳо: Choose from over 640 symbols using the Рамз калид.
- Чорчубахо: Apply over 100 frames to your labels using the Чорчӯба калид.
- Функсияҳои дигар: Utilize keys for Size, Width, Barcode, History, Mirror, and more for advanced customization.
Image: The label maker showcasing its extensive library of frames, symbols, and font options for creative labeling.
3.3. Printing Multiple Labels
The D210S offers efficient options for printing multiple labels:
- Multi-Copy Editing: Use the multi-copy editing one-touch key to continuously edit and print up to 55 different labels. This is ideal for creating a series of unique labels without re-entering the menu.
- Printing Identical Labels: To print multiple copies of the same label, it is advisable to print them all at once and then cut them individually. You can specify the number of copies (1-9) by pressing Гузариш + Чоп кардан, then using the navigation keys or a number key, and finally pressing OK or Чоп кардан.
Image: A flowchart demonstrating how to use the multi-copy function for sequential label printing.
Image: A guide on how to efficiently print multiple identical labels using the Shift + Print key combination.
3.4. Тозакунии матн
To clear text or formatting:
- Delete Letters One by One: -ро пахш кунед BS (Backspace) калид.
- Delete All Text and Format: пахш кунед Тоза → OK → [Матн ва формат] → OK.
- Delete Text Only: пахш кунед Тоза → [Танҳо матн] → OK.
Image: A step-by-step guide on using the Clear function to remove text or formatting from the label maker's display.
3.5. Using the Built-in Cutter
After printing, use the integrated cutter to cleanly separate your label from the tape roll. The cutter is located on the side of the device. Press the cutter lever firmly to cut the label.
3.6. Optimizing Label Tape Usage
To reduce label tape costs, it is recommended to set the label margin to "Narrow" in the device settings. Navigate to Танзимотҳо → Маржа → танг.
Image: A visual comparison highlighting the tape-saving benefit of using the 'Narrow' margin setting on the D210S.
4. Нигоҳдорӣ
4.1. Тозакунӣ
To ensure optimal performance and print quality, regularly clean your label maker:
- Қисми берунии дастгоҳро бо матои мулоим ва хушк пок кунед.
- If the print head becomes dirty, gently wipe it with a cotton swab dampened with isopropyl alcohol. Ensure the device is turned off and disconnected from power before cleaning.
- Remove any dust or debris from the tape compartment.
4.2. Tape Replacement
When the label tape runs out or you wish to change tape types, follow the tape installation instructions in Section 2.3. Ensure you use compatible EazeID D210S label tapes for best results.
4.3. Нигоҳдорӣ
Store the label maker in a cool, dry place away from direct sunlight and extreme temperatures. If storing for an extended period, remove the AAA batteries to prevent leakage.
5. Баррасии мушкилот
If you encounter issues with your EazeID D210S Label Maker, refer to the following common problems and solutions:
| Мушкилот | Сабаби эҳтимолӣ | Ҳалли |
|---|---|---|
| Дастгоҳ фаъол нест | Low or dead batteries; USB cable not connected properly; incorrect power adapter. | Replace AAA batteries; ensure USB Type-C cable is securely connected; use a compatible 5V power adapter. |
| Poor print quality (faint, blurry, or missing lines) | Dirty print head; incorrect tape installation; low tape quality. | Clean the print head (see Section 4.1); re-install label tape correctly; ensure you are using genuine EazeID D210S compatible tape. |
| Tape jams frequently | Improper tape installation; foreign objects in tape path; tape not feeding smoothly. | Re-install tape, ensuring it is seated correctly; check for and remove any obstructions; ensure tape is not creased or damaged. |
| Label not cutting properly | Cutter blade dull or obstructed. | Ensure no tape residue is blocking the cutter; if issues persist, contact customer support. |
| Паёми хато дар экран | Ҳолати хатогии мушаххас. | Refer to the on-screen message for guidance. Common errors relate to tape issues (e.g., "Tape End"). Follow instructions or re-install tape. |
6. Мушаххасоти
| Номи модел | D210S Gray Label Maker Machine |
| Бренд | EazeID |
| Технологияи чоп | Гармӣ |
| Технологияи пайвастшавӣ | Клавиатура |
| Андозаи максималии медиа | 12мм |
| Ҳаҷми максималии чопи ранг | 180 DPI |
| Ҳаҷми ҳадди аксар чопи сиёҳ ва сафед | 203 DPI |
| Таъмини нерӯ | Type-C Cable or 6 AAA Batteries |
| Андозаҳои маҳсулот | 5 x 5 x 2 инч |
| Вазни ашё | 1.26 фунт |
| Компонентҳои дохилшуда | Label maker, Sample label tape, Type-C Cable, User Manual |
| Maximum Copies Per Run | 55 (different labels) |
7. Кафолат ва дастгирӣ
7.1. Маълумот дар бораи кафолат
The EazeID D210S Label Maker comes with a limited warranty. Please refer to the warranty card included in your package or visit the official EazeID webсайт барои шартҳо ва шартҳои муфассал дар бораи фарогирии кафолат ва давомнокӣ.
7.2. Дастгирии муштариён
For technical assistance, troubleshooting not covered in this manual, or inquiries about replacement parts and accessories, please contact EazeID customer support. Contact information can typically be found on the EazeID official webсайт ё дар бастаи маҳсулот.
8. Видеои маҳсулот
Дар маълумоте, ки барои ворид кардан дар ин дастур дода шудааст, ягон видеои расмии маҳсулот аз фурӯшанда ёфт нашуд.
