Дастури корбарии мошини ҳубобӣ барои равшанкунии Eliminator Bubbletron EX

Муқаддима

This manual provides essential information for the safe and efficient operation of your Eliminator Lighting Bubbletron EXL Bubble Machine. Please read these instructions thoroughly before initial use to ensure proper setup, operation, and maintenance.

Маълумот оид ба бехатарӣ

Барои кам кардани хатари зарбаи барқ, сӯхтор ё ҷароҳати ҷисмонӣ ҳамеша чораҳои бехатарии зеринро риоя кунед:

• Боварӣ ҳосил кунед, ки дастгоҳ дар сатҳи устувор ва ҳамвор ҷойгир карда шудааст.
• Агар сими барқ ​​вайрон шуда бошад, дастгоҳро кор накунед.
• Дастгоҳро аз об ё дигар моеъҳо дур нигоҳ доред.
• Сӯрохиҳои вентилятсияро манъ накунед.
• Use only approved bubble fluid.
• Пеш аз тоза кардан ё хидматрасонӣ дастгоҳро аз розетка ҷудо кунед.
• This device is for indoor use or covered outdoor use in dry conditions only.
• Аз дастрасии кӯдакон дур нигоҳ доред.

Мундариҷаи баста

• Eliminator Bubbletron EXL Bubble Machine
• 9-foot/3M Wired Remote Control (Model: LC-3)
• Сими барқ
• Дастури корбар (ин ҳуҷҷат)

Ташкил кардан

1. Кушодани: Carefully remove the bubble machine from its packaging. Inspect for any damage during transit.
2. Ҷойгиршавӣ: Place the unit on a flat, stable surface. Ensure adequate ventilation around the machine.
3. Зарфҳои моеъ: Locate the EZ-Access front fluid tank. Open the tank cover.
4. Пур кардани моеъ: Pour appropriate bubble fluid into the tank. Do not overfill; observe the MAX fill line.
5. Пайвасти барқ: Connect the power cord to the unit's power input and then to a suitable electrical outlet (120V or 230V, depending on model).
6. Пайвастшавӣ бо назорати дурдаст: Plug the wired remote control (LC-3) into the designated remote control input on the rear of the unit.

Тавсифи тасвир: An annotated diagram showing the top and rear views of the Eliminator Bubbletron EXL. Key components are labeled, including the Carrying Handle, EZ-Access Front Fluid Tank, Manual Bubble Switch, Input for Remote Control, Fuse, Power Cord, and Large Dual Fans.

Дастурҳои амалиётӣ

1. Фаъол: Flip the ON/OFF switch located on the rear of the unit to the "ON" position.
2. Фаъол кардани футурҳо:
   • Wired Remote Control (LC-3): Use the switch on the LC-3 remote control to turn the bubble production ON or OFF.
   • Гузариш дастӣ: If not using the remote, the manual bubble switch on the rear of the unit can be used to activate bubble production.
3. Bubble Production: The internal bubble wands will begin to rotate, and the dual high-velocity fans will disperse bubbles into the air.
4. Хомӯш: When finished, turn the bubble production OFF using the remote or manual switch, then flip the main ON/OFF switch on the rear of the unit to the "OFF" position. Unplug the power cord from the electrical outlet.

Тавсифи тасвир: The Eliminator Bubbletron EXL bubble machine in operation, emitting a large quantity of bubbles against a dark background with blue lighting, demonstrating its output capacity.

Нигоҳдорӣ

Regular maintenance ensures optimal performance and extends the lifespan of your bubble machine.

• Fluid Tank Cleaning: After each use, empty any remaining bubble fluid from the tank. Rinse the tank with distilled water to prevent residue buildup.
• Тозакунии берунӣ: Қисми берунии дастгоҳро бо матои мулоим ва хушк пок кунед. Тозакунанда ё ҳалкунандаҳои абразивиро истифода набаред.
• вентиляторҳо: Periodically check the fan vents for dust or debris. Use a soft brush or compressed air to clean them.
• Нигоҳдорӣ: Store the unit in a cool, dry place when not in use. Ensure the fluid tank is empty and clean before storage.

Мушкилкушо

Мушаххасоти

Кафолат ва дастгирӣ

For warranty information and technical support, please contact Eliminator Lighting directly. Keep your purchase receipt as proof of purchase for any warranty claims.

Маълумот барои тамос: Please refer to the official Eliminator Lighting website or product packaging for the most current contact details for customer support.