GOYOJO 60° Digital Gloss Meter (Model: MODEL) Instruction Manual

1. Муқаддима

The GOYOJO 60° Digital Gloss Meter is a compact and precise instrument designed for measuring the gloss level of various surfaces. This device is suitable for applications in industries such as glass, mobile phones, ceramics, automobiles, and hardware. It features automatic calibration, a single 60° measuring angle, and a user-friendly interface for efficient operation.

This manual provides essential information on how to set up, operate, maintain, and troubleshoot your gloss meter to ensure accurate and consistent results.

2. Маҳсулот ба охир расидview

2.1 Қисмҳо

Familiarize yourself with the main components of your GOYOJO 60° Digital Gloss Meter:

Тасвири 2.1: The gloss meter and its calibration board, highlighting the Display Screen, Calibrated State indicator, Test Port, USB Port, Calibration Board, and Hand Strap Fastener.

• Экрани намоиш: Shows measurement readings, battery status, and operational modes.
• Calibrated State Indicator: Displays the current calibration status.
• Порт -санҷиш: The area where the gloss meter makes contact with the surface to be measured.
• Порти USB: Барои пур кардани дастгоҳ.
• Calibration Board: Used for automatic calibration of the device.
• Hand Strap Fastener: Барои пайваст кардани лента.

2.2 Хусусиятҳои асосӣ

• Rapid Measurement: Single measurement time is less than 1 second.
• Мӯҳлати тӯлонии батарея: Capable of approximately 30,000 measurements on a single charge.
• Компакт ва сабук: Weighs only 80 grams, designed for portability.
• Калибрченкунии автоматӣ: No manual calibration required; the device calibrates automatically upon power-on.
• Magnetic Suction Calibration Base: Ensures secure and accurate calibration, protecting against contamination.
• Аризаи бисёрҷониба: Suitable for measuring gloss on glass, mobile phones, ceramics, automotive finishes, and various hardware.

3. Танзимот

3.1 Пуркунии ибтидоӣ

Before first use, ensure the gloss meter is fully charged. Connect the device to a USB power source using the provided USB cable. The battery indicator on the display will show charging status.

3.2 Қувваи барқ

Press and hold the power button to turn on the device. The gloss meter will perform an automatic calibration upon startup.

3.3 Калибрченкунии худкор

The device features intelligent automatic calibration. Simply place the gloss meter onto its magnetic suction calibration base. The device will automatically calibrate itself, ensuring accuracy for immediate measurements. Regular calibration is recommended to maintain long-term accuracy.

4. Дастурҳои истифодабарӣ

4.1 Single Measurement Mode

1. Ensure the device is powered on and calibrated.
2. Place the test port of the gloss meter firmly and flatly onto the surface to be measured.
3. Press the measurement button briefly. The gloss value will be displayed on the screen within 1 second.

4.2 Реҷаи ченкунии доимӣ

For continuous monitoring of gloss levels:

Тасвири 4.1: Press and hold the measurement button for 2 seconds to switch to continuous measurement mode.

1. With the device powered on, press and hold the measurement button for approximately 2 seconds.
2. The device will enter continuous measurement mode, providing real-time gloss readings as it is moved across a surface.
3. To exit continuous measurement mode, press the measurement button briefly again.

4.3 Хониши экран

The LCD display shows the gloss unit (GU) value. Note that this model displays gloss readings in whole units (e.g., 83 GU), not with decimal places.

5. Нигоҳдорӣ

5.1 Тозакунӣ

• Use the provided cleaning cloth to gently wipe the test port and the calibration board.
• Ensure no dust or debris is present on the test port or calibration board, as this can affect measurement accuracy.
• Тозакунанда ё ҳалкунандаҳои абразивиро истифода набаред.

5.2 Нигоҳдорӣ

Store the gloss meter in a clean, dry environment, away from extreme temperatures and direct sunlight. Always keep the calibration board clean and protected when not in use.

6. Баррасии мушкилот

• Хонишҳои номувофиқ: Ensure the test port and the surface being measured are clean. Re-calibrate the device by placing it on its calibration base. Ensure firm and flat contact with the surface during measurement.
• Дастгоҳ фаъол нест: Check the battery level. If low, connect the device to a USB power source and charge it fully.
• Масъалаҳои намоиш: If the display is blank or shows errors, try restarting the device. If the issue persists, contact customer support.
• No Change in Readings: Verify that the device is in the correct measurement mode (single or continuous). Ensure the surface is being measured correctly and that there is a detectable difference in gloss if expecting a change.

7. Мушаххасоти

Тасвири 7.1: Параметрҳо ва андозаҳои маҳсулот муфассал.

8. Кафолат ва дастгирӣ

Барои маълумоти кафолат ва дастгирии техникӣ, лутфан ба ҳуҷҷатҳое, ки ҳангоми хариди шумо пешниҳод шудаанд, муроҷиат кунед ё бевосита бо фурӯшанда тамос гиред. Барои ҳама даъвоҳои кафолат далели хариди худро нигоҳ доред.