1. Муқаддима
This manual provides detailed instructions for the safe and correct installation and use of the Meliconi Slimstyle Plus 400 S Fixed Wall TV Mount. This mount is designed for televisions ranging from 40 to 82 inches, supporting VESA patterns 200x200, 300x300, and 400x400. It is suitable for installation on both solid walls and plasterboard walls (with specific weight limitations). Please read all instructions carefully before beginning installation.
2. Маълумот оид ба бехатарӣ
- Ҳама дастурҳоро хонед: Ensure you understand all installation steps and safety warnings before proceeding.
- Иқтидори вазн: Do not exceed the maximum load capacity of 50 kg (110 lbs) for solid walls or 35 kg (77 lbs) for plasterboard walls.
- Андозаи ТВ: This mount is compatible with TVs from 40 to 82 inches.
- Мутобиқати VESA: Verify your TV's VESA mounting pattern (distance between mounting holes on the back of the TV) matches 200x200, 300x300, or 400x400 mm.
- Навъи девор: Ensure the wall structure can safely support the combined weight of the mount and your television. If unsure, consult a qualified professional.
- Воситаҳо: Ҳангоми насб асбобҳои мувофиқро истифода баред ва либоси муҳофизатӣ пӯшед.
- Кӯдакон: Кӯдаконро аз минтақаи насб дур нигоҳ доред.
3. Мундариҷаи баста
Carefully unpack the box and ensure all components are present and undamaged. Refer to the image below for typical package contents.
Image 3.1: Meliconi Slimstyle Plus 400 S packaging. The package typically includes the wall plate, TV brackets, mounting hardware (screws, anchors, washers), and an instruction manual.
Мундариҷаи маъмулӣ инҳоро дар бар мегирад:
- Wall Plate (main mount component)
- TV Brackets (attach to the back of the TV)
- Mounting Hardware (screws, wall anchors, washers, spacers)
- Дастури дастурӣ
4. Маҳсулот ба охир расидview ва Андозаҳо
The Meliconi Slimstyle Plus 400 S is a fixed wall mount designed for a sleek, low-profile installation. The mount features the Fast Block locking system for secure TV attachment and EVA foam protectors to safeguard your TV.
Image 4.1: The Meliconi Slimstyle Plus 400 S fixed wall TV mount.
Refer to the technical drawing below for detailed dimensions:
Image 4.2: Technical drawing showing the dimensions of the Meliconi Slimstyle Plus 400 S mount. Maximum width is approximately 40 cm (15.7 inches) and maximum height is approximately 40 cm (15.7 inches) for the TV mounting arms. The mount depth is very slim, approximately 1.5 cm (0.6 inches) without spacers and 3 cm (1.2 inches) with included spacers.
5. Дастури насб
5.1. Пеш аз оғоз кардан
- Мутобиқати телевизионро санҷед: Confirm your TV's size (40-82 inches) and VESA pattern (200x200, 300x300, or 400x400 mm).
- Муайян кардани намуди девор: Identify if your wall is solid (concrete, brick) or plasterboard. This affects the type of anchors and drilling required.
- Locate Studs (for plasterboard): For plasterboard walls, it is crucial to mount the bracket to a vertical wooden or metal stud for maximum security.
- Тозакунӣ: Ensure there are no electrical wires, water pipes, or other obstructions in the drilling area.
5.2. Воситаҳои зарурӣ
- Қалам
- Лентаи ченкунӣ
- Сатҳи
- Парма
- Drill Bits (appropriate for wall type and anchor size)
- Бургиранда (сари Филлипс)
- Stud Finder (for plasterboard walls)
5.3. Қадам ба қадам насб
- Қавсҳои телевизорро ба телевизор пайваст кунед:
- Телевизиони худро боэҳтиёт рӯи поён ба рӯи мулоим ва тоза ҷойгир кунед.
- Қавсҳои телевизорро бо сӯрохиҳои васлкунии VESA дар қафои телевизоратон ҳамвор кунед.
- Select the correct screws and washers from the provided hardware kit that fit your TV's mounting holes. Use spacers if necessary to ensure the brackets are flush and cables are not pinched.
- Securely fasten the TV brackets to the TV. Do not overtighten.
- Mark Wall Drilling Positions:
- Determine the desired height for the top of your TV.
- Hold the wall plate against the wall at the desired position. Use a level to ensure it is perfectly horizontal.
- Mark the drilling points through the holes on the wall plate with a pencil.
- сӯрохиҳои пармакунӣ:
- Using the appropriate drill bit for your wall type (e.g., masonry bit for concrete, wood bit for studs), drill holes at the marked positions.
- For solid walls, insert the plastic wall anchors into the drilled holes. Tap gently with a hammer if needed until flush with the wall surface.
- For plasterboard walls, ensure you are drilling into a vertical stud. Use appropriate stud-specific anchors if not directly into a stud, but direct stud mounting is highly recommended for safety. The mount is suitable for plasterboard walls with a thickness from 12.5mm to 25mm.
- Плитаи девори кӯҳӣ:
- Align the wall plate with the drilled holes.
- Insert the mounting screws through the wall plate and into the anchors (for solid walls) or directly into the studs (for plasterboard).
- Tighten all screws firmly until the wall plate is securely fixed to the wall. Do not overtighten.
- Телевизорро дар тахтаи деворӣ овезон кунед:
- With assistance, carefully lift the TV (with attached brackets) and hook the TV brackets onto the top edge of the wall plate.
- Gently lower the TV until the brackets fully engage with the wall plate. Ensure the TV is centered and level.
- Secure TV with Fast Block System:
- Locate the Fast Block locking mechanism on the TV brackets.
- Engage the Fast Block system to securely lock the TV to the wall plate. This prevents accidental dislodgement.
- Verify that the TV is firmly attached and cannot be easily lifted off the mount.
6. Амалиёт
Once installed, the Meliconi Slimstyle Plus 400 S is a fixed mount, meaning it does not offer swivel or tilt adjustments beyond any initial slight tilt. The primary operation involves securely attaching and detaching your TV.
- Attaching the TV: As described in the installation steps, hook the TV brackets onto the wall plate and engage the Fast Block locking system.
- Detaching the TV: To remove the TV, disengage the Fast Block locking system. With assistance, carefully lift the TV upwards and away from the wall plate.
7. Нигоҳдорӣ
- Тозакунӣ: Монтажро бо матои мулоим ва хушк тоза кунед. Аз тозакунандаҳои абразивӣ ё ҳалкунандаҳо худдорӣ кунед.
- Санҷишҳои даврӣ: Periodically check all screws and connections to ensure they remain tight and secure. Do not overtighten.
- Зарар: Агар ягон қисми васл осеб дида шавад, онро истифода набаред. Барои кӯмак бо дастгирии мизоҷон тамос гиред.
8. Баррасии мушкилот
- Телевизор сатҳи баланд надорад: Ensure the wall plate was installed perfectly level. If not, you may need to adjust the wall plate's position.
- Кӯҳ худро озод ҳис мекунад: Re-check all mounting screws on both the wall plate and the TV brackets. Ensure they are securely tightened. Verify the Fast Block system is engaged. If the wall anchors are loose, professional assistance may be required.
- TV does not fit: Double-check your TV's VESA pattern and weight against the mount's specifications. Ensure you are using the correct screws and spacers.
9. Мушаххасоти
| Хусусият | Мушаххасоти |
|---|---|
| Рақами модел | 480957 |
| Андозаи ТВ мувофиқ | 40 Ба 82" |
| Мутобиқати VESA | 200x200, 300x300, 400x400 mm |
| Maximum Load Capacity (Solid Wall) | 50 кг (110 фунт) |
| Maximum Load Capacity (Plasterboard Wall) | 35 кг (77 фунт) |
| Навъи васлкунӣ | Монтажи деворӣ |
| Навъи ҳаракат | Собит |
| Кунҷи ҳадди аксар | 12 Degrees (slight downward tilt) |
| Материал | Металл |
| Ранги | Сиёҳ |
| Андозаҳои маҳсулот | 0.91 x 18.03 x 4.69 inches (approximate, mount only) |
| Вазни ашё | 3.74 фунт |
10. Кафолат ва дастгирӣ
The Meliconi Slimstyle Plus 400 S TV mount is 100% Made in Italy and certified by TÜV SÜD, ensuring high quality and reliability. For specific warranty details, please refer to the documentation included with your purchase or visit the official Meliconi webсайт.
For technical support, missing parts, or any questions regarding the installation or operation of your Meliconi TV mount, please contact Meliconi customer service through their official webсайт ё маълумоти тамос, ки дар бастаи маҳсулоти шумо оварда шудааст.
