ETON PA 1 Ultra Compact 1-Channel Class D AmpДастури дастури liifier

1. Муқаддима

The ETON PA 1 is an ultra-compact 1-channel Class D amplifier designed for car and RV audio systems. It delivers powerful performance in a minimal footprint, making it suitable for flexible installation in various vehicles. This manual provides essential information for safe installation, operation, and maintenance of your PA 1 ampлифер.

The PA 1 features advanced Class D technology, high-quality electronic components, and a premium finish, ensuring high efficiency and superior sound quality. Its robust die-cast aluminum housing with an anodized matte finish provides effective temperature management. The removable top plate conceals numerous adjustment options, including a tunable low-pass filter, subsonic filter, high-level input voltage control, and gain adjustment.

Image 1.1: ETON PA 1 Ultra Compact 1-Channel Class D Ampболобардор, пеш view.

2. Дастурамал оид ба бехатарӣ

• Always disconnect the vehicle's battery before beginning any installation or wiring work to prevent electrical shock or damage.
• Ба заминкании дуруст таъмин кунед amplifier to the vehicle's chassis to prevent electrical hazards and ensure optimal performance.
• фош накунед ampонро дар ҷои хушк ва хуб вентилятсияшуда насб кунед.
• Барои насбҳои мураккаб ё агар шумо дар бораи ягон қадам шубҳа дошта бошед, бо мутахассиси соҳибихтисос машварат кунед.
• Use appropriate wiring gauges for power, ground, and speaker connections as specified in the installation section to prevent overheating and ensure stable operation.
• Ба таври бехатар насб кунед amplifier to prevent it from moving during vehicle operation, which could cause injury or damage.

3. Мундариҷаи баста

Лутфан бастаро барои ҷузъҳои зерин тафтиш кунед:

• 1 x ETON PA 1 Ampзиндатар
• 1 x сими барқ
• 3 x Speaker Connectors
• 3 x High-Level Cables
• 4 x Пойҳои васлкунӣ
• Виддаҳои васлкунӣ
• 1 x Remote Level Control

4. Хусусиятҳои маҳсулот

• Тарҳрезии ултра компакт: Measuring 128 x 100 x 45 mm, the monoblock amplifier integrates flexibly into various vehicle spaces.
• Advanced Class D Technology: Ensures high efficiency, minimal distortion, and precise sound reproduction.
• Сохтмони устувор: Features a robust die-cast aluminum housing with an anodized matte finish for effective heat dissipation.
• Филтрҳои танзимшаванда: Includes a tunable low-pass filter (12/24 dB/oct) and a subsonic filter for precise sound tuning.
• High-Level Input (EPS): Equipped with adjustable high-level input voltage and High-Level Input Resistance (EPS) for seamless integration with factory head units.
• Integrated Adjustment Tool: A convenient tool is integrated into the heatsink for filter and gain adjustments.
• Removable Connectors: Features detachable connectors for power and audio signals, simplifying installation and removal.
• Монтажи универсалӣ: Supplied with mounting feet for secure and flexible installation.
• Тарҳрезии якҷояшаванда: Multiple PA series amplifiers can be stacked for compact multi-ampтанзимоти лифт.
• Назорати сатҳи дур: Includes a wired remote control for convenient bass level adjustment.

Image 4.1: ETON PA 1 amplifier demonstrating its compact size with a pen for scale.

5. Насбкунӣ

5.1 Ҷойгиркунии Ampзиндатар

Select a secure, dry, and well-ventilated location for mounting the amplifier. Ensure there is sufficient airflow around the unit to prevent overheating. Use the provided mounting feet and screws to securely fix the amplifier to a solid surface in your vehicle. The compact dimensions allow for flexible placement options.

Тасвири 5.1: Таркид view illustrating the removable top plate and mounting feet for the ETON PA 1.

5.2 Пайвастҳои барқ

1. B+ (Positive Power): Connect the B+ terminal to the vehicle's positive battery terminal using a suitable gauge power cable. An inline fuse (not supplied) must be installed within 18 inches (45 cm) of the battery.
2. GND (замин): Connect the GND terminal to a clean, solid chassis ground point on the vehicle. Ensure the connection is free of paint and corrosion for optimal conductivity.
3. REM (Remote Turn-On): Connect the REM terminal to the remote turn-on output of your head unit. This signal turns the ampфаъол ва хомӯш кардани лифтро бо системаи аудиоии худ.

5.3 Пайвастҳои баландгӯякҳо

Connect your subwoofer to the speaker output terminals of the amplifier. Ensure correct polarity (+ to + and - to -) for optimal sound reproduction. The PA 1 is a monoblock amplifier designed for a single subwoofer.

5.4 Input Signal Connection

The PA 1 offers both high-level and low-level (RCA) input options:

• Вуруди сатҳи баланд: Use the provided high-level cables to connect directly to your vehicle's speaker outputs. This is ideal for factory head units without RCA pre-outs. The amplifier features High-Level Input Resistance (EPS) and adjustable input voltage (1-15V or 15-40V) for optimal integration.
• Вуруди сатҳи паст (RCA): If your head unit has RCA pre-outs, connect RCA cables from the head unit to the ampсурохии вуруди RCA lifier.

5.5 Идоракунии сатҳ аз дур

Connect the wired remote level control to the 'REMOTE' port on the amplifier. This allows for convenient adjustment of the subwoofer output level from your listening position.

Тасвири 5.2: Ба охир расидview of the ETON PA 1 connection panel, including power, speaker, and input terminals.

6. Амалиёт ва танзимот

6.1 Accessing Controls

The adjustment controls for the PA 1 amplifier are located under the removable top plate. Carefully remove the top plate to access the settings. An integrated adjustment tool is provided within the heatsink for precise tuning.

Image 6.1: ETON PA 1 with the top cover removed, showing the internal adjustment controls.

Image 6.2: Close-up of the integrated adjustment tool for fine-tuning the ampтанзимоти лифт.

6.2 Танзими фоида

Назорати GAIN ба amplifier's input sensitivity to the output level of your head unit. To set the gain, start with the control at its minimum position. Play a familiar piece of music at a moderate volume on your head unit. Slowly increase the GAIN control until you hear distortion, then back it off slightly until the sound is clear. This ensures maximum clean output from the ampлифер.

6.3 Филтри пастгузар (LPF)

The LPF (Low-Pass Filter) allows only frequencies below the set point to pass through to the subwoofer. Adjust the LPF frequency (range: 30 Hz - 220 Hz) to blend the subwoofer's output seamlessly with your main speakers. The filter slope is adjustable between 12 dB/octave and 24 dB/octave for precise control over the frequency rolloff.

6.4 Филтри зери садо

The SUBSONIC filter removes extremely low frequencies (range: 20 Hz - 50 Hz) that are typically inaudible and can cause your subwoofer to over-excurt, potentially leading to damage. Setting this filter helps protect your subwoofer and improves overall sound quality by focusing its output on audible bass frequencies.

6.5 Ҳаҷми вурудtage Танзим

For high-level inputs, the amplifier features a switch to adjust the input voltage range (1-15V or 15-40V). Select the appropriate range based on the output voltage of your vehicle's head unit to ensure proper signal processing.

6.6 Идоракунии сатҳ аз дур

The included remote level control allows you to conveniently adjust the subwoofer's output volume from your driver's seat without needing to access the ampбардоранда бевосита.

7. Нигоҳдорӣ

• Тозакунӣ: нигоҳ доред amplifier clean and free from dust. Use a soft, dry cloth for cleaning. Avoid using harsh chemicals or abrasive materials.
• Санҷиши пайвастшавӣ: Periodically check all power, ground, and speaker connections for tightness and corrosion. Loose connections can lead to poor performance or damage.
• Вентилятсия: Боварӣ ҳосил кунед, ки amplifier's cooling fins are not obstructed and that there is adequate airflow around the unit to prevent overheating.

8. Баррасии мушкилот

If you experience issues with your ETON PA 1 ampлифофа, ба дастури ҳалли мушкилоти зерин муроҷиат кунед:

• Не қудрат / Ampliifier фурӯзон нест:
  • Check the main power cable connection at the battery and ampлифер.
  • Verify the ground connection is secure and free of corrosion.
  • Inspect the inline fuse near the battery; replace if blown.
  • Ensure the remote turn-on (REM) wire is connected and receiving a 12V signal from the head unit.
• Не баромади садо:
  • Confirm that the input signal cables (RCA or high-level) are securely connected to both the head unit and the ampлифер.
  • Check the speaker wire connections at both the amplifier and the subwoofer for correct polarity and tightness.
  • Adjust the GAIN control; it might be set too low.
  • Ensure the head unit is powered on and producing an audio signal.
• Овози таҳрифшуда:
  • Reduce the GAIN setting on the amplifier. If the gain is set too high, it can cause distortion.
  • Check the LPF and Subsonic filter settings. Incorrect settings can lead to muddy or distorted bass.
  • Verify that the subwoofer's impedance matches the amplifier's capabilities (e.g., 1 ohm, 2 ohms, 4 ohms).
  • Ensure the input signal from the head unit is clean and not distorted.
• Ampлифт аз ҳад зиёд гарм шудан:
  • Дар атрофи он вентилятсияи мувофиқро таъмин кунед amplifier. Clear any obstructions from the cooling fins.
  • Check the speaker impedance. Running the amplifier below its minimum rated impedance can cause overheating.
  • Reduce the volume or gain settings if the amplifier is consistently overheating.

9. Мушаххасоти

Эзоҳ: Мушаххасот бояд бе огоҳӣ тағир дода шаванд.

10. Кафолат ва дастгирӣ

For detailed warranty information, technical support, and service inquiries, please refer to the official ETON website or contact your authorized ETON dealer. It is recommended to keep your proof of purchase for any warranty claims.