NENEN DDS661

NENEN DDS661 Single Phase Digital Energy Meter User Manual

Model: DDS661 (AC110V 60Hz / AC220V 50Hz)

Муқаддима

This manual provides essential information for the safe and efficient operation of your NENEN DDS661 Single Phase Digital Energy Meter. Please read this manual thoroughly before installation and use, and retain it for future reference. This device is designed for measuring active energy consumption in single-phase AC circuits.

Маълумот оид ба бехатарӣ

  • Насбкунӣ бояд танҳо аз ҷониби кормандони соҳибихтисос анҷом дода шавад.
  • Боварӣ ҳосил кунед, ки пеш аз насб ё нигоҳдорӣ қувваи барқ ​​​​канда шудааст.
  • Do not operate the meter if it is damaged.
  • Observe all local electrical codes and regulations.
  • The meter is designed for indoor use in a dry environment.

Маҳсулот ба охир расидview

The NENEN DDS661 is a single-phase digital energy meter designed for DIN rail mounting. It features an LCD backlight display for clear readings of energy consumption (KWh), and is available in AC110V 60Hz and AC220V 50Hz variants. Some models may include RS485 communication capabilities for remote data access.

Пеш view of the NENEN DDS661 Single Phase Digital Energy Meter with LCD display showing KWh reading and a green indicator light.

Расми 1: Пеш view of the NENEN DDS661 Digital Energy Meter. This image shows the meter's compact design, the LCD screen displaying KWh, and the pulse indicator light. The model number DDS661 is visible at the top of the display area.

NENEN DDS661 meter displaying various electrical parameters like Positive Power Consumption, Reverse Power Consumption, Total Power, Power, Power Factor, Frequency, Voltagд, ва ҷорӣ.

Figure 2: Display modes of the DDS661 meter. This image illustrates the different electrical parameters that can be shown on the LCD, including KWh for positive and reverse consumption, total power, instantaneous power, power factor, frequency, voltage, and current. Some models may feature RS485 communication.

Насб ва насб

The DDS661 energy meter is designed for easy installation on a standard 35mm DIN rail. Ensure the installation location is dry, well-ventilated, and free from excessive vibration or electromagnetic interference.

Қадамҳои насб:

  1. Қатъи барқ: Before beginning any installation, ensure that the main power supply to the circuit where the meter will be installed is completely disconnected and locked out.
  2. Монтаж: Attach the meter securely to a 35mm DIN rail. The meter features a clip mechanism for quick mounting.
  3. Тараф view of the NENEN DDS661 Digital Energy Meter showing the DIN rail mounting clip.

    Расми 3: Тараф view illustrating the DIN rail mounting mechanism. This image highlights the blue clip used to secure the meter onto a standard DIN rail.

  4. Ноқил: Connect the input and output wires according to the wiring diagram provided on the meter's casing or in the detailed wiring instructions (not provided in this general manual). Ensure correct phase and neutral connections. The meter supports up to 60A.
  5. Тафтиш: Ҳама пайвастҳоро барои мустаҳкамӣ ва дурустӣ дубора санҷед.
  6. Барқарорсозии барқ: Restore power to the circuit. The meter's LCD display should illuminate, indicating proper function.
NENEN DDS661 Digital Energy Meter mounted on a metal DIN rail.

Figure 4: The DDS661 meter securely installed on a DIN rail. This image demonstrates how the meter appears once properly mounted, ready for electrical connections.

Дастурҳои амалиётӣ

Display Readings:

The DDS661 meter features an LCD backlight display that cycles through various parameters or can be manually advanced depending on the model. Common display parameters include:

  • кВт/соат: Total active energy consumption.
  • Ҷилдиtagд (V): Instantaneous line voltage.
  • ҷорӣ (A): Instantaneous line current.
  • Қувваи (Вт): Instantaneous active power.
  • Омили нерӯ (PF): The ratio of real power to apparent power.
  • Фосила (Гц): The frequency of the AC supply.

The green LED indicator flashes at a rate of 1000 imp/kWh, indicating active energy measurement. A faster flash rate signifies higher power consumption.

RS485 Communication (for DDS661-RS485 models):

For models equipped with RS485, the meter can be integrated into a monitoring system for remote data acquisition. Refer to the specific RS485 communication protocol documentation for details on data registers, baud rates, and addressing. This functionality allows for convenient management and monitoring of power status.

Нигоҳдорӣ

The NENEN DDS661 energy meter is designed for long-term, maintenance-free operation under normal conditions. Regular checks are recommended:

  • Тозакунӣ: Ҳисобкунакро тоза ва аз чанг озод нигоҳ доред. Барои тоза кардан аз матои мулоим ва хушк истифода баред. Аз тозакунандаҳои абразивӣ ё ҳалкунандаҳо истифода набаред.
  • Санҷишҳои пайвастшавӣ: Periodically inspect wiring connections to ensure they remain tight and free from corrosion.
  • Шароити экологӣ: Боварӣ ҳосил кунед, ки муҳити корӣ дар ҳудуди муқарраршудаи ҳарорат ва намӣ боқӣ мемонад.

Мушкилкушо

МушкилотСабаби эҳтимолӣҲалли
Meter display is blank.No power supply; incorrect wiring; internal fault.Check power supply to the circuit. Verify wiring connections. If power is present and wiring is correct, the meter may be faulty and require replacement.
KWh reading not increasing.No load connected; incorrect wiring; internal fault.Ensure a load is connected and drawing power. Verify wiring, especially input/output terminals. If issues persist, the meter may be faulty.
Green LED not flashing.No power consumption; LED fault.Confirm that there is active power consumption. If power is being consumed and the LED does not flash, there might be an internal issue.
Хониши нодуруст.Incorrect wiring; external interference; meter calibration issue.Re-check all wiring connections. Ensure the meter is not exposed to strong electromagnetic fields. If suspected calibration issues, contact support.

For problems not listed here or if solutions do not resolve the issue, please contact NENEN customer support.

Мушаххасоти

ПараметрАрзиш
МоделиDDS661 / DDS661-RS485
Ҷилди номиналӣtageAC110V (60Hz) or AC220V (50Hz/60Hz)
Ҷараёни номиналӣ5(60)А
НамоишLCD Backlight Digital Display
Басомади набз1000 имп/кВт/соат
НасбкунӣРоҳи оҳани 35mm
МатериалМуҳандисии пластикӣ
Вазни ашёТақрибан 1.32 фунт (0.6 кг)
Андозаҳои бастаҳоТақрибан 1.18 x 0.79 x 0.39 инч (3 x 2 x 1 см)

Кафолат ва дастгирӣ

NENEN products are manufactured to high-quality standards. For warranty information, please refer to the documentation included with your purchase or visit the official NENEN website. For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact NENEN customer service through the retailer where the product was purchased or via the contact information provided on the NENEN official webсайт.

Эзоҳ: Шартҳои мушаххаси кафолат вобаста ба минтақа ва фурӯшанда метавонанд фарқ кунанд.

Ҳуҷҷатҳои марбут - DDS661

Пешview Хониши ҳисобкунакҳои алоқаи DDS661 RS485: Протоколи MODBUS-RTU ва суроғаҳои реестри
Дастури техникӣ барои ҳисобкунаки энергетикии DDS661, ки муоширати RS485-ро бо истифода аз протоколи MODBUS-RTU тафсилот медиҳад. Форматҳои маълумотро фаро мегирад, суроғаҳоро барои хондани параметрҳо ба монанди ҷtagд, ҷорӣ, қудрат ва усулҳои тағир додани суроғаи ҳисобкунак ва суръати алоқа.
Пешview DDS661 DIN Rail Single Phase Energy Meter User Manual
User manual for the DDS661 DIN rail single phase two wire energy meter, covering safety instructions, specifications, installation, operation, and troubleshooting.
Пешview DIN Rail Single Phase Electronic Energy Meter User Manual
User manual for the DIN Rail Single Phase Electronic Energy Meter, covering characteristics, installation, usage, transport, storage, and connection diagrams. Includes model numbers DDS661, DDS662, DDS668, DDS667, DDS669.
Пешview RS485 Протоколи хониши ҳисобкунак ва суроғаҳои сабти ном
Дастури техникӣ, ки протоколи иртиботии RS485 ва суроғаҳои сабти номро барои хондани ҳисобкунакҳои энергетикӣ, аз ҷумла форматҳои маълумоти MODBUS-RTU, фармонҳои хондан/навиштани параметрҳо ва харитаҳои сабти ном тавсиф мекунад.