1. Муқаддима
The Graphtec CE8000-60 Plus is a high-performance 24-inch cutter plotter designed to enhance production efficiency across various applications, including signage, vinyl graphics, DTF apparel, print & cut, POP & packaging, and automotive markets. This manual provides essential information for the proper setup, operation, and maintenance of your Graphtec CE8000-60 Plus to ensure optimal performance and longevity.
Figure 1.1: Graphtec CE8000-60 Plus 24" Cutter Plotter with media loaded, demonstrating its primary function.
2. Маълумот оид ба бехатарӣ
Барои пешгирии осеб ва осеб дидани таҷҳизот ҳамеша чораҳои бехатарии зеринро риоя кунед:
- Ensure the plotter is placed on a stable, level surface.
- Сими барқро ба васлаки заминӣ пайваст кунед.
- Keep hands and loose clothing away from moving parts, especially the cutting blade and pinch rollers, during operation.
- Do not attempt to disassemble or repair the plotter yourself. Refer to qualified service personnel.
- Use only Graphtec-approved accessories and replacement parts.
- Unplug the plotter from the power source before cleaning or performing maintenance.
3. Дар қуттӣ чӣ мавҷуд аст
Боварӣ ҳосил кунед, ки ҳамаи ҷузъҳо ҳангоми кушодан мавҷуданд:
- Graphtec CE8000-60 Cutter Plotter Unit
- Истгоҳи мошин
- Updated CB09UB Blade Holder
- Standard Blade (for vinyl up to 0.25mm thick)
- Roll Media Holder
- Tool & Accessory Holder
- Сими барқ
- Сими пайвасткунандаи USB
- Graphtec Studio 2 Design Software (License/Installation Media)
- Cutting Master 5 Plug-in for Adobe Illustrator and CorelDraw (License/Installation Media)
- Cutting Blade Manual
- Studio CE8000 Machine Training Videos (Access Information)
- 5 Design Cards for Artwork (SVGs, JPGs, Monograms, Commercial Use)
Расми 3.1: Зиёдview of the components included with the Graphtec CE8000-60 Plus.
4. Танзимот
4.1 Assembling the Machine Stand
Follow the instructions provided in the separate assembly guide for the machine stand. Ensure all bolts are securely tightened for stability.
Figure 4.1: The Graphtec CE8000-60 Plus plotter fully assembled on its dedicated stand.
Расми 4.2: Тараф view of the machine stand, highlighting its sturdy construction.
4.2 Насби нармафзор
Install the provided Graphtec Studio 2 design software and Cutting Master 5 plug-in on your computer. Refer to the respective software installation guides for detailed steps. Cutting Master 5 integrates with Adobe Illustrator and CorelDraw for direct cutting from your design application.
4.3 Пайвастшавӣ
The CE8000-60 Plus supports both USB and Wireless LAN connectivity.
- Пайвасти USB: Connect the plotter to your computer using the supplied USB cable.
- Шабакаи бесим: Utilize the new Wireless LAN capability for flexible placement and seamless connectivity. Refer to the plotter's on-screen menu for Wi-Fi setup instructions.
4.4 Боркунии медиа
Carefully load your desired media (e.g., vinyl, heat transfer film) onto the roll media holder. Ensure the media is aligned straight and secured by the pinch rollers. The newly developed Media Set Assist Function helps in holding the media stable and preventing feeding problems.
5. Дастурҳои истифодабарӣ
5.1 Панели идоракунӣview
The CE8000-60 Plus features a touch screen and mechanical keys for intuitive operation. Familiarize yourself with the menu structure for easy navigation.
Figure 5.1: The plotter's control panel, showing the touch screen display and navigation buttons.
| Тугма/Икон | Функсия |
|---|---|
| LINK | Manages connection settings (USB, LAN). |
| АСБОБ | Adjusts cutting tool settings (force, speed, offset). |
| ЯРОК | Configures Automatic Registration Mark Sensing settings. |
| МАЙДОН | Defines the cutting area. |
| ВАО | Manages media settings (type, size). |
| ТОНФИГ | Accesses general plotter configurations. |
| МАЪЛУМОТ | Displays plotter information (firmware version, serial number). |
| СУСТ | Reduces cutting speed for precise adjustments. |
| ГУРЕЗЕД | Cancels current operation or returns to previous menu. |
| ВОРИД | Интихобро тасдиқ мекунад ё ба меню ворид мекунад. |
5.2 Basic Cutting Operation
- Prepare your design in Graphtec Studio 2 or your preferred design software (e.g., Adobe Illustrator, CorelDraw) using the Cutting Master 5 plug-in.
- Load the media onto the plotter, ensuring it is straight and secured by the pinch rollers. Adjust pressure adjustable push rollers as needed.
- Set the origin point on the plotter using the control panel.
- Send the cutting data from your computer to the plotter.
- Monitor the cutting process. The CE8000 boasts a 450 gf cutting force and 39"/s cutting speed for efficient operation.
- Once cutting is complete, unload the media.
5.3 Using ARMS (Automatic Registration Mark Sensing)
The reliable Registration Mark Sensing System (ARMS) ensures precise contour cutting of pre-printed graphics. This is crucial for applications like print & cut.
- Ensure your printed graphic includes the necessary registration marks.
- Load the printed media onto the plotter.
- From the control panel, select the ARMS function. The plotter will automatically detect the registration marks.
- Once marks are detected, send the cutting data. The plotter will adjust the cutting path based on the detected marks for accurate alignment.
Figure 5.2: The cutting head precisely reading registration marks on printed media for accurate contour cutting.
6. Нигоҳдорӣ
Regular maintenance ensures the longevity and optimal performance of your plotter.
- Тозакунӣ: Regularly clean the plotter's exterior with a soft, dry cloth. Use a brush or compressed air to remove dust and debris from the cutting area and around the pinch rollers.
- Иваз кардани пиёз: Replace the cutting blade when you notice a decrease in cutting quality or when the blade becomes dull. Refer to the Cutting Blade Manual for detailed instructions on how to safely replace the CB09UB blade.
- Pinch Rollers: Keep the pinch rollers clean and free of adhesive residue to ensure proper media feeding.
- Навсозии нармафзор: Periodically check for integrated firmware updates to ensure your plotter has the latest features and performance enhancements.
7. Баррасии мушкилот
This section addresses common issues you might encounter. For more complex problems, contact Graphtec support.
| Мушкилот | Сабаби эҳтимолӣ | Ҳалли |
|---|---|---|
| Cutter not responding | Loose cable connection, power off, software issue. | Check power and USB/LAN connections. Restart plotter and computer. Verify software settings. |
| Poor cutting quality | Dull blade, incorrect cutting force/speed, media issues. | Replace blade. Adjust cutting force and speed settings. Ensure media is flat and properly loaded. |
| Media slipping during cut | Insufficient pinch roller pressure, dirty rollers, media not aligned. | Increase pinch roller pressure. Clean rollers. Re-load media, ensuring proper alignment. |
| ARMS not detecting marks | Poorly printed marks, lighting conditions, sensor obstruction. | Ensure marks are clear and high contrast. Check lighting. Clean ARMS sensor. |
8. Мушаххасоти
| Хусусият | Тафсилот |
|---|---|
| Рақами модел | CE8000-60-BASE-1 |
| Паҳнои буриш | 24 инч |
| Max. Cutting Force | 450 гф |
| Макс. Суръати буриш | 39 дюйм/сония (1000 мм/с) |
| Пайвастшавӣ | USB, Wireless LAN |
| Registration Mark System | ARMS (Automatic Registration Mark Sensing) |
| Сафҳаи идоракунӣ | Touch Screen and Mechanical Keys |
| Нармафзори дохилшуда | Graphtec Studio 2, Cutting Master 5 |
| Материал | Металл |
| Режими амалиёт | Автоматӣ, дастӣ |
| Истеҳсолкунанда | Graphtec America |
9. Барномаҳо
The Graphtec CE8000-60 Plus is versatile and suitable for a wide range of cutting applications:
- Signage and Vinyl Graphics
- DTF (Direct-to-Film) Apparel
- Print & Cut Applications
- POP (Point of Purchase) Displays & Packaging
- Automotive Markets (e.g., Paint Protection Film, Window Tinting Film)
- Тамғакоғазҳои фармоишӣ
Figure 9.1: Diverse applications including apparel, print & cut, vinyl decals, and paint protection film.
Figure 9.2: Additional applications such as window signage, packaging, custom labels, and window tinting.
10. Кафолат ва дастгирӣ
For warranty information, please refer to the documentation provided with your purchase or visit the official Graphtec America website. For technical support, software updates, or service inquiries, please contact Graphtec America customer service directly.
Graphtec America Contact Information: Лутфан, ба шахси расмии истеҳсолкунанда муроҷиат кунед website or the documentation included with your product for the most current contact details.
