Маҳсулот ба охир расидview
The KEMEI 2242 Professional Hair Clipper is designed for precise hair cutting and beard trimming. This cordless barber clipper features an LED display, a powerful 9000 RPM motor, and a convenient charging base, providing a professional grooming experience.
Image: KEMEI 2242 Professional Hair Clipper, showcasing тарҳи зебои он.
Компонентҳои дохилшуда
Your KEMEI 2242 Hair Clipper package includes the following items:
- 1 x Дастгирии мӯй
- 1 x Пойгоҳи барқ
- 1 x кабели USB
- 6 x Limit Combs (1.5mm, 3mm, 4.5mm, 6mm, 9mm, 12mm)
- 1 x Clean Brush
- 1 x Lubricating Oil (for blade maintenance)
- 1 x Дастури корбар
Image: All items included in the KEMEI 2242 Hair Clipper package.
Насб кардан ва пур кардан
- Пардохти аввалия: Before first use, fully charge the clipper. Place the clipper on the charging base and connect the USB cable to the base and a suitable power adapter (not included). The LED display will indicate charging status. A full charge takes approximately 3.5 hours.
- Ҳаёти батарея: A full charge provides up to 220 minutes of cordless operation. The LED display shows the remaining battery percentage.
- Пайвасткунии шонаҳои лимити: Select the desired limit comb (1.5mm, 3mm, 4.5mm, 6mm, 9mm, or 12mm). Align the comb with the clipper blade and push firmly until it clicks into place. To remove, gently pull the comb away from the blade.
Image: The KEMEI 2242 clipper on its charging base, illustrating USB charging capability.
Дастурҳои амалиётӣ
- Фаъол / Хомӯш: Press the power switch to turn the clipper on or off.
- Танзими суръати мотор: The KEMEI 2242 features an adjustable motor speed from 5000 RPM to 9000 RPM. Use the dedicated buttons near the LED display to increase or decrease the speed. The LED display will show the current RPM.
- Adjusting Cutterhead: Use the cutterhead adjustment lever on the side of the clipper to fine-tune the cutting length without a comb. This allows for precise fading and blending.
- Буридани мӯй:
- Боварӣ ҳосил кунед, ки мӯи шумо тоза ва хушк аст.
- Attach the appropriate limit comb for the desired length.
- Hold the clipper with the blade teeth pointing upwards and move against the direction of hair growth.
- For best results, use smooth, overlapping strokes.
Image: Close-up of the KEMEI 2242 LED display showing motor speed and remaining usage time.
Image: Diagram highlighting the cutterhead adjustment lever, DLC coated anti-scratch blade, power switch, and high-definition LED display.
Нигоҳдорӣ
Нигоҳубини мунтазам кори беҳтарини мӯйсафедро таъмин мекунад ва мӯҳлати кори мӯйсафеди шуморо дароз мекунад.
- Тоза кардани чӯбҳо: After each use, turn off the clipper and remove any attached comb. Use the provided clean brush to remove loose hairs from the blades.
- Равғани пиёзҳо: Apply a few drops of the included lubricating oil to the blades after every few uses or when the clipper feels sluggish. Turn the clipper on for a few seconds to distribute the oil evenly. This helps maintain cutting efficiency and prevents rust.
- Нигоҳдорӣ: Мошини буриданро дар ҷои хушк ва хунук, дур аз нури бевоситаи офтоб ва намӣ нигоҳ доред.
Мушкилкушо
| Мушкилот | Сабаби эҳтимолӣ | Ҳалли |
|---|---|---|
| Clipper фаъол нест. | Батареяи кам ё бе заряд. | Charge the clipper fully using the charging base and USB cable. |
| Клиппер мӯйро мекашад ё бад мебурад. | Майдонҳо кунд, ифлос ё равған нашудаанд. | Clean the blades thoroughly and apply lubricating oil. If the problem persists, consider professional sharpening or blade replacement. |
| Clipper садои ғайриоддӣ мебарорад. | Blades are misaligned or debris is caught. | Turn off and clean the blades. Check for any visible obstructions. Ensure blades are properly aligned. |
| Дисплейи LED кор намекунад. | Malfunction or low battery. | Charge the clipper. If the issue continues, contact customer support. |
Мушаххасоти
- Модели: КМ-2242
- Манбаи нерӯ: Батарея (бесим)
- Навъи батарея: Батареяи барқгиранда 4500 мАч
- Вақти пуркунӣ: Тақрибан 3.5 соат
- Вақти корӣ: То 220 дақиқа
- Суръати мотор: Adjustable 5000-9000 RPM (High-speed brushless motor)
- Маводҳои чӯб: Stainless Steel (DLC Coated Anti-scratch Blade)
- Шонаҳои дохилшуда: 1.5мм, 3мм, 4.5мм, 6мм, 9мм, 12мм
- Намоиш: High-definition LED Display (shows battery, RPM)
- Мавод: Carbon Steel, Metal body
- Андозаҳо: 7.48 x 8.46 x 3.07 инч
- Вазн: 2.18 фунт
- Вуруд: 5V --- 1A 10W
Маълумот оид ба бехатарӣ
Please read and understand all safety instructions before using the KEMEI 2242 Hair Clipper.
- Always unplug the charging base before use or cleaning.
- Do not use the appliance near water or while bathing/showering.
- Аз дастрасии кӯдакон дур нигоҳ доред.
- Do not use on other body parts not intended for hair trimming.
- Do not ingest any parts of the appliance or accessories.
- Avoid dropping the clipper, as this may damage the internal components or blades.
- If the clipper or charging cable is damaged, do not use it. Contact customer support for assistance.
Кафолат ва дастгирӣ
KEMEI products are manufactured with quality and performance in mind. For warranty information, product support, or to inquire about replacement parts, please refer to the contact information provided on the product packaging or visit the official KEMEI webсайт.
For further assistance, you may also contact the seller directly through your purchase platform.
