1. Муқаддима
This manual provides essential information for the safe and efficient operation of your VEVOR Commercial Ice Cream Display Case. Please read these instructions thoroughly before installation, operation, or maintenance. Retain this manual for future reference.
Image: VEVOR Commercial Ice Cream Display Case, showcasing its design and clear glass top.
2. Маълумот оид ба бехатарӣ
Ҳангоми истифода бурдани асбобҳои барқӣ ҳамеша қоидаҳои асосии бехатариро риоя кунед, то хатари сӯхтор, зарбаи барқ ва осеби одамонро коҳиш диҳед.
- Боварӣ ҳосил кунед, ки дастгоҳ дуруст ба замин пайваст карда шудааст.
- Дастгоҳро бо сими барқ ё васлаки вайроншуда кор накунед.
- Қуттиҳои вентилятсияро аз монеаҳо тоза кунед.
- Дар ин асбоб моддаҳои таркандаро, аз қабили банкаҳои аэрозолии дорои сӯзишвории оташгиранда нигоҳ надоред.
- Таъмирро танҳо кормандони соҳибихтисос бояд анҷом диҳанд.
3. Танзимот
3.1 Кушодани баста
Carefully remove all packaging materials, including tape and protective film. Inspect the unit for any shipping damage. Report any damage immediately to the carrier and supplier.
3.2 Ҷойгиркунӣ
Place the display case on a firm, level surface capable of supporting its weight when fully loaded. Ensure adequate ventilation around the unit. Maintain a minimum clearance of 10 cm (4 inches) from walls or other objects to allow for proper airflow to the condenser. Avoid direct sunlight, heat sources, or areas with high humidity.
3.3 Тозакунии ибтидоӣ
Before first use, clean the interior and exterior surfaces with a mild detergent and warm water. Rinse thoroughly and dry with a soft cloth.
3.4 Пайвастшавии барқ
Дастгоҳро ба васлаки барқии махсус ва заминӣ, ки ба васлкунаки барқӣ мувофиқ аст, пайваст кунед.tagд ва amperage requirements specified on the product label. Do not use extension cords or adapter plugs.
3.5 Оғози ибтидоӣ
After placement and connection, allow the unit to stand for at least 2-4 hours before plugging it in. This allows refrigerants to settle. Once plugged in, turn on the unit and allow it to run empty for several hours to reach the desired operating temperature before loading products.
4. Дастурҳои истифодабарӣ
4.1 Назорати ҳарорат
The display case features a front-facing temperature control. Adjust the thermostat to set the desired temperature for your ice cream products. Refer to the control panel for specific temperature settings and indicators.
4.2 Боркунии маҳсулот
Load products evenly into the provided PVC-coated steel baskets. Do not block the internal air vents, as this can impede proper cooling. Ensure products are within the designated load lines to allow the sliding glass doors to close completely.
4.3 дарҳои шишагини слайд
The unit is equipped with top sliding glass doors for easy access. Ensure the doors are fully closed when not in use to maintain optimal temperature and energy efficiency.
4.4 Using the Lock
The display case includes a lock mechanism for securing the contents. To lock the unit, insert the key into the lock cylinder located on the sliding glass door frame and turn it. Reverse the process to unlock. For a visual guide, please refer to the video below:
Video: Demonstrates the correct procedure for locking and unlocking the VEVOR Commercial Ice Cream Display Case.
5. Нигоҳдорӣ
Regular maintenance ensures optimal performance and longevity of your display case.
5.1 Тозакунӣ
- дохилӣ: Clean regularly with a mild, non-abrasive detergent and warm water. Rinse and dry thoroughly.
- берунӣ: Wipe down with a soft cloth and mild cleaner. Avoid harsh chemicals that may damage the finish.
- Дарҳои шишагӣ: Use a glass cleaner and a soft cloth to keep the glass clear for optimal product visibility.
5.2 Барф кардани яхкунӣ
This unit requires manual defrosting when ice buildup on the evaporator coils reaches approximately 6 mm (1/4 inch) thickness. To defrost:
- Remove all products and store them in another freezer.
- Дастгоҳро хомӯш кунед ва онро аз васлаки барқ ҷудо кунед.
- Leave the sliding doors open to allow ice to melt naturally. Place towels or a shallow pan to collect water.
- Once defrosted, clean and dry the interior.
- Plug the unit back in and allow it to reach operating temperature before reloading products.
5.3 Тоза кардани кати конденсатор
The condenser coils should be cleaned every 3-6 months, or more frequently in dusty environments, to ensure efficient operation. Unplug the unit before cleaning. Use a stiff brush or vacuum cleaner to remove dust and debris from the condenser fins.
6. Баррасии мушкилот
Пеш аз тамос бо хадамот, масъалаҳои маъмули зеринро тафтиш кунед:
| Мушкилот | Сабаби эҳтимолӣ | Ҳалли |
|---|---|---|
| Агрегат хунук намешавад | Power cord unplugged; circuit breaker tripped; thermostat set too high; doors not closing properly. | Check power connection; reset breaker; adjust thermostat; ensure doors are sealed. |
| Садои аз ҳад зиёд | Unit not level; loose parts; fan obstruction. | Level the unit; check for loose components; clear fan area. |
| Об дар ошёна | Drain pan overflowing; drain hose clogged. | Empty drain pan; clear drain hose. |
7. Мушаххасоти
| Хусусият | Тафсилот |
|---|---|
| ASIN | B0DL5XJ4WD |
| Миқдори бастаи адад | 1 |
| Санаи аввалин дастрас | 28 октябри соли 2024 |
8. Кафолат ва дастгирӣ
For warranty information or technical support, please refer to the warranty card included with your product or contact VEVOR customer service directly. Ensure you have your model number and purchase date available when contacting support.
