Дастурҳо+

KATOOL KT-T830W

KATOOL KT-T830W Tire Changer Machine User Manual

2.0HP Tire Changer Machine with Bead Blaster Rim Clamp 14"-24"

1. Муқаддима

This manual provides comprehensive instructions for the safe and efficient operation, setup, and maintenance of your KATOOL KT-T830W Tire Changer Machine. Designed for professional use, this machine offers robust performance for changing tires on a wide range of vehicles, including passenger cars, SUVs, and light trucks. Please read this manual thoroughly before operating the machine to ensure proper usage and to prevent injury or damage.

2. Маълумот оид ба бехатарӣ

Always prioritize safety when operating heavy machinery. Failure to follow these safety guidelines may result in serious injury or equipment damage.

  • Пеш аз истифода бурдани мошин, ҳама дастурҳоро хонед ва бифаҳмед.
  • Wear appropriate personal protective equipment (PPE), including safety glasses, gloves, and steel-toed boots.
  • Ensure the machine is properly grounded and connected to a suitable power supply (110V 1PH).
  • Verify that the air supply is clean, dry, and within the specified pressure range (0.8-1.0MPa / 116-145PSI).
  • Ҳангоми кор дастҳо, пойҳо ва либосҳоро аз қисмҳои ҳаракаткунанда дур нигоҳ доред.
  • Do not exceed the maximum wheel diameter (24") or maximum wheel width (15").
  • Never attempt to service or repair the machine while it is powered on.
  • Боварӣ ҳосил кунед, ки майдони корӣ тоза, равшан ва аз монеаҳо холӣ аст.
  • Танҳо кормандони омӯзонидашуда ва ваколатдор бояд ин таҷҳизотро истифода баранд.

3. Компонентҳо барview

The KATOOL KT-T830W Tire Changer Machine is comprised of several key components designed for efficient tire servicing.

KATOOL KT-T830W Tire Changer Machine with accessories
Figure 3.1: KATOOL KT-T830W Tire Changer Machine with included accessories.
  • Turntable/ClampҶоғҳои инг: Securely holds the wheel during operation. Features self-centering jaws.
  • Шикастани муҳра: Used to separate the tire bead from the rim.
  • Сари васлкунӣ/ҷудокунӣ: The tool that engages with the tire bead for removal and installation.
  • Assist Arms (Double Assist): Aids in lifting and holding stiff sidewall tires, reducing operator effort.
  • Педалҳои пои: Control various functions including clamping, turntable rotation, and bead breaker operation.
  • Air Pressure Regulator and Gauge: Manages and displays the incoming air pressure.
  • Bead Blaster: Integrated system for rapid inflation and seating of stubborn tire beads.
  • силиндраи нафт: Provides power for clamping and other pneumatic functions. (7.9 inch / 200mm)
Comparison of oil cylinder sizes
Figure 3.2: The KT-T830W features an upgraded 7.9-inch (200mm) oil cylinder for enhanced performance.
Air pressure regulator and gauge
Figure 3.3: Close-up of the air pressure regulator and gauge, essential for monitoring pneumatic operations.
Foot pedals for machine control
Figure 3.4: The machine is controlled via four robust aluminum foot pedals, providing precise operation.

4. Танзимот

Proper setup is crucial for the safe and effective operation of your tire changer. It is recommended to have assistance during assembly due to the machine's weight.

4.1 Кушодан ва ҷойгиркунӣ

  1. Carefully unpack all components from the shipping crate. Inspect for any signs of damage during transit.
  2. Choose a level, stable surface for placement. The machine should be anchored to the floor for maximum stability during operation.
  3. Ensure adequate clearance around the machine for safe operation and maintenance. Refer to the dimensions diagram for space requirements.
Dimensions diagram of the KATOOL KT-T830W
Figure 4.1: Dimensional drawing of the KT-T830W, showing approximate height and width for installation planning.

4.2 Маҷлис

  1. Attach the vertical column and assist arms to the main body of the machine using the provided hardware.
  2. Connect the pneumatic lines to their respective ports. Ensure all connections are secure and leak-free.
  3. Connect the electrical power cord to a grounded 110V 1PH outlet.
  4. Add pneumatic tool oil to the air lubricator as indicated by the fill level. This is crucial for the longevity of the pneumatic components.

4.3 Санҷишҳои аввалия

  1. Turn on the air supply and adjust the pressure regulator to the recommended operating pressure (0.8-1.0MPa / 116-145PSI).
  2. Test all foot pedal functions to ensure smooth and responsive operation of the clamping jaws, turntable, and bead breaker.
  3. Verify that the assist arms move freely and lock securely into position.
KATOOL KT-T830W with comparison to older models
Figure 4.2: The KT-T830W (left) features wider clamp compatibility and a larger oil cylinder compared to previous models (right).
Close-up comparison of clamping jaws and pedals
Расми 4.3: Муфассал view аз cl мустаҳкамamping jaws and durable aluminum pedals, highlighting structural improvements.
Newly upgraded features of the tire changer
Расми 4.4: Зиёдview of newly upgraded components including a bigger disk, structural innovation, improved assist arm, larger universal shovel, and larger/thicker cylinder.

5. Дастурҳои истифодабарӣ

This section details the steps for safely and effectively changing a tire using the KATOOL KT-T830W.

5.1 Tire Removal (Demounting)

  1. Шинаро хомӯш кунед: Remove the valve core to fully deflate the tire.
  2. Маҳлулҳоро молидан: Равғани молиданиро ба ҳар ду маҳтоби шина молед.
  3. Break Beads: Position the wheel on the bead breaker arm. Use the bead breaker pedal to push the tire bead away from the rim. Repeat for both sides of the tire.
  4. Clamp Чарх: Чархро ба рӯйи гардиш ҷойгир кунед. cl-ро истифода баредamping pedal to secure the wheel firmly with the jaws. Ensure the wheel is centered. The machine supports outside clamping (12"-22") ва дохили clamping (14"-24").
  5. Position Mount/Demount Head: Adjust the mount/demount head so it is just above the rim edge and locked into place.
  6. Demount Top Bead: Use a tire lever to pry the top bead over the mount/demount head. Rotate the turntable using the foot pedal to fully demount the top bead. Utilize the double assist arms as needed for stiff sidewalls.
  7. Demount Bottom Bead: Reposition the tire so the bottom bead is accessible. Use the tire lever to lift the bottom bead over the mount/demount head. Rotate the turntable to fully demount the tire from the rim.

5.2 Tire Installation (Mounting)

  1. Маҳлулҳоро молидан: Apply tire lubricant to both beads of the new tire.
  2. Банди поёни кӯҳӣ: Place the bottom bead of the tire onto the rim, positioning it under the mount/demount head. Rotate the turntable to guide the bottom bead onto the rim.
  3. Bead боло: Position the top bead of the tire over the mount/demount head. Use the double assist arms to hold the tire down and guide the bead onto the rim while rotating the turntable.
  4. Шинонидани чарх: Remove the mount/demount head and assist arms. Connect an air hose to the tire valve. Use the integrated bead blaster function (if needed) to seat the beads quickly, then inflate the tire to the manufacturer's recommended pressure. Monitor the pressure gauge carefully.
  5. Чархро хориҷ кунед: Once inflated, release the clamping jaws using the foot pedal and remove the wheel from the turntable.
Video 5.1: A detailed demonstration of the KATOOL KT-T830W Tire Changer in operation, including bead breaking, demounting, mounting, and inflation processes. This video provides visual guidance for the steps outlined above.

6. Нигоҳдорӣ

Regular maintenance ensures the longevity and optimal performance of your KATOOL KT-T830W Tire Changer.

  • Ҳар рӯз: Мошинро, махсусан табақи гардишкунанда ва сӯзанро тоза кунедamping jaws, to remove tire lubricant and debris. Check air lines for leaks.
  • Ҳар ҳафта: Check the oil level in the air lubricator and refill with pneumatic tool oil if necessary. Lubricate all pivot points and sliding surfaces with a light machine oil.
  • Ҳар моҳ: Inspect all bolts and fasteners for tightness and tighten as needed. Check the condition of the drive belt (if applicable) and adjust tension if loose.
  • Ҳар сол: Have a qualified technician inspect the machine for wear and tear, especially on critical components like cylinders, valves, and electrical connections.

7. Баррасии мушкилот

Ин бахш роҳҳои ҳалли мушкилоти умумӣ, ки шумо метавонед дучор шавед, пешниҳод мекунад.

МушкилотСабаби эҳтимолӣҲалли
Мошин фаъол нест.Не таъминоти барқ; шикастани барқ; ноқилҳои ноқил.Check power connection; reset circuit breaker; inspect wiring (by qualified personnel).
Clamping jaws not operating.No air pressure; air leak; clogged air filter; faulty pedal.Check air supply and pressure; inspect air lines; clean/replace air filter; inspect pedal mechanism.
Табдилдиҳанда давр намезанад.Motor issue; drive belt loose/broken; electrical fault.Check motor connection; inspect/adjust/replace drive belt; consult qualified technician.
Bead blaster not working.Insufficient air pressure; nozzle obstruction; faulty valve.Increase air pressure; clear nozzle; inspect valve.
Чарх задан/васл карданаш душвор аст.Insufficient lubrication; stiff sidewall tire; incorrect technique.Apply more tire lubricant; utilize assist arms; review дастурҳои амалиётӣ.

8. Мушаххасоти

Technical specifications for the KATOOL KT-T830W Tire Changer Machine.

ХусусиятМушаххасоти
МоделиKT-T830W
Қувваи мотор2.0 HP / 1.5 кВт
Таъмини нерӯ110В 1ПҲ
Диаметри максималии чарх41" / 1040мм
Максимум паҳнои чарх15" / 380мм
Берун Clamp Диапазон12" - 22"
Дар дохили Clamp Диапазон14" - 24"
Фишори ҳаво0.8-1.0МПа (116-145PSI)
Суръати гардиш6.8Р/мин
Сатҳи садо<70 дБ
Вазни холис562 LBS / 255 KG

9. Кафолат ва дастгирӣ

For warranty information and technical support, please contact the seller, Rainier Engineering, LTD, directly. They can provide details regarding product warranties, service, and replacement parts.

  • Нақшаҳои муҳофизатӣ: Additional protection plans may be available for purchase, including 2-Year and 3-Year options.
  • Бозгашт: Standard return policies apply, typically allowing for refund/replacement within 30 days of purchase.

Ҳуҷҷатҳои марбут - KT-T830W

Пешview Тағйирдиҳандаи шина Katool KT-T850: Дастури маҳсулот ва дастури амалиёт
Дастури расмии маҳсулот барои Katool KT-T850 Tilt Back Tire Changer Bead Blaster. Маълумоти муҳимро дар бораи насб, истифодаи бехатар, нигоҳдорӣ, бартараф кардани мушкилот ва мушаххасоти техникии устохонаҳои автомобилӣ пешниҳод мекунад.
Пешview Тағйирдиҳандаи шина KATOOL KT-810: Дастури насб, истифода ва нигоҳдорӣ
Дастури мукаммали корбар барои ивазкунандаи шина KATOOL KT-810, ки насб, истифода, тартиботи бехатарӣ, мушаххасоти техникӣ, нигоҳдорӣ, бартараф кардани мушкилот ва маълумоти кафолатро дар бар мегирад. Қадамҳои муфассалро барои насб ва демонтажи шина дар бар мегирад.
Пешview Маълумот Кафолати Таҷҳизот Хадамоти Чарх Katool
Маълумоти муфассали кафолат барои таҷҳизоти хидматрасонии чархҳои Katool, аз ҷумла ивазкунакҳои шина, мувозинатҳои чархҳо ва ҳамворкунакҳои чарх. Шартҳо, маҳдудиятҳо ва масъулиятҳои ҳам кафолатдиҳанда ва ҳам харидорро фаро мегирад.
Пешview Тағйирдиҳандаи шина KATOOL KT-830: Дастури насб, истифода ва нигоҳдорӣ
Дастури мукаммали корбар барои ивазкунандаи чархи нимавтоматии KATOOL KT-830, ки насб, истифода, нигоҳдорӣ, дастурҳои бехатарӣ ва ҳалли мушкилотро дар бар мегирад.
Пешview Тағйирдиҳандаи шина KATOOL KT-830: Дастури насб, истифода ва нигоҳдорӣ
Дастури мукаммали корбар барои ивазкунандаи чархи нимхудкори KATOOL KT-830, ки насб, истифода, нигоҳдорӣ, дастурҳои бехатарӣ, мушаххасоти техникӣ, бартараф кардани мушкилот ва маълумоти қисмҳоро дар бар мегирад.
Пешview Дастурамал оид ба насб, истифода ва нигоҳдорӣ KATOOL KT-830
Дастури мукаммал барои KATOOL KT-830 KATOOL KT-830 нимтағйирдиҳандаи чархи чархдор, ки насб, истифода, нигоҳдорӣ ва бартарафсозии мушкилотро дар бар мегирад. Хусусиятҳои техникӣ, дастурҳои бехатарӣ ва рӯйхати қисмҳоро дар бар мегирад.