CAME 68025500 BPT KHPS Push Button Instruction Manual

1. Муқаддима

This manual provides instructions for the installation, operation, and maintenance of the CAME 68025500 BPT KHPS Push Button. This product is an original replacement part designed for door entry systems. Please read this manual thoroughly before installation and use to ensure proper functionality and safety.

2. Маҳсулот ба охир расидview

The CAME 68025500 is a replacement push button specifically designed for BPT KHPS series door entry panels. It ensures reliable operation within compatible systems, restoring or maintaining the functionality of your intercom or access control system.

Тасвир: Пеш view of the CAME 68025500 BPT KHPS Push Button, showing the black button, two screw terminals for wiring, and connection slots at the bottom.

3. Маълумот оид ба бехатарӣ

Installation should only be performed by qualified personnel to prevent electrical hazards and ensure correct operation.
Always disconnect power to the door entry system before attempting any installation, removal, or maintenance procedures.
Ensure all electrical connections are secure and properly insulated to prevent short circuits or electric shock.
Do not expose the product to excessive moisture, direct water spray, or extreme temperatures outside its operating range.

For detailed safety guidelines specific to your overall door entry system, refer to its main instruction manual.

4. Танзим ва насб

4.1. Воситаҳои зарурӣ

Мурватакаки хурди ҳамвор
Wire strippers (if necessary, for preparing wire ends)

4.2. Қадамҳои насб

Қатъи барқ: Before beginning any work, ensure that the main power supply to the door entry system is completely disconnected at the circuit breaker or fuse box.
Панели дастрасӣ: Carefully open or remove the cover of the existing BPT KHPS door entry panel to gain access to the internal components and wiring.
Тугмаи кӯҳнаро тоза кунед: Identify the faulty or old push button. Using a small flat-head screwdriver, carefully loosen the terminal screws that secure the wires to the old button. Disconnect the wires and then gently remove the old button from its housing. Note the position of each wire for correct reconnection.
Тугмаи насби нав: Insert the new CAME 68025500 push button into the designated slot within the panel. Ensure it fits snugly and is oriented correctly.
Пайвастшавии сим: Reconnect the previously disconnected wires to the terminals of the new push button. Ensure that the wires are inserted fully into the terminals and that the terminal screws are tightened firmly to establish a secure electrical connection. If unsure about wire polarity or placement, refer to the original system's wiring diagram.
Панели бехатар: Once wiring is complete and verified, carefully close and secure the door entry panel cover.
Барқарорсозии барқ: Restore power to the door entry system from the circuit breaker or fuse box.
Функсияи санҷиш: Test the new push button to ensure it operates correctly (e.g., activates the chime, opens the door, or performs its intended function).

Аз наздики view of the screw terminals on the CAME 68025500 push button

Тасвир: Наздик view of the screw terminals on the CAME 68025500 push button, indicating where wires should be connected for electrical contact.

5. Дастурҳои истифодабарӣ

The CAME 68025500 push button functions as a momentary contact switch. When pressed, it completes an electrical circuit, typically activating a chime, opening a door, or performing another programmed function within the door entry system.

To activate the function, press the black button firmly.
Release the button to allow it to return to its original position, thereby breaking the electrical circuit.

The specific action triggered by the button press is determined by the configuration and programming of your overall door entry system.

6. Нигоҳдорӣ

Тозакунӣ: Clean the surface of the push button with a soft, dry, lint-free cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the plastic or finish.
Санҷиш: Periodically inspect the button for any visible signs of wear, physical damage, or loose connections. Ensure the button moves freely without sticking.
Санҷиши функсионалӣ: Regularly test the button's operation to ensure it responds correctly and consistently.

There are no user-serviceable parts inside the button mechanism itself. If the button malfunctions or becomes damaged, it should be replaced with an original CAME 68025500 replacement part.

7. Баррасии мушкилот

7.1. Button Does Not Respond

Санҷиши нерӯ: Ensure the entire door entry system has power and is functioning.
Санҷиши ноқилҳо: Disconnect power and verify that the wires are securely connected to the button's terminals. Check for any loose, corroded, or damaged wiring.
System Fault: If the wiring to the button is correct, the issue might lie with the main door entry system, its power supply, or the wiring leading to the button. Consult the system's main manual or a qualified technician.
Button Failure: If all other components and wiring are confirmed to be in working order, the push button itself may be faulty and require replacement.

7.2. Button Sticks When Pressed

Монеа: Check for any debris, dirt, or foreign objects around the button that might be causing it to stick. Gently clean the area.
Зарар: The internal mechanism of the button may be damaged. If cleaning does not resolve the issue, replacement is recommended.

8. Мушаххасоти

Модели: CAME 68025500 BPT KHPS Push Button
Рақами Қисм: 68025500/1_ECI
Навъи: Replacement Momentary Push Button
Мутобиқат: Designed for BPT KHPS series door entry systems
Вазн: Approximately 1 kg (Note: This weight is as per product data, actual button weight may be less)
Компонентҳо дохил мешаванд: 1 Тугмаи пахшкунӣ
Истеҳсолкунанда: ОМАД

Шарҳ: Specific electrical ratings (e.g., voltage, current) for the push button are dependent on the overall door entry system it is integrated into. Refer to the documentation of your main BPT KHPS system for these detailed electrical specifications.

9. Кафолат ва дастгирӣ

For warranty information, technical assistance, or to inquire about replacement parts, please contact your original point of purchase or the manufacturer, CAME, directly. It is advisable to retain your purchase receipt as proof of purchase for warranty claims.

Истеҳсолкунанда: ОМАД
Рақами Қисм: 68025500/1_ECI
ASIN: B0DPB8TX8F

	CAME VA / 01 Дастури насби системаи вуруди видео Дастури насб барои таъминоти барқи системаи CAME VA/01 Video Entry, ки мушаххасоти техникӣ, тавсифи ҷузъҳо, расмиёти насб ва с.ampконфигуратсияҳои система.
	Дастури насби AGT V + LITHOS омад Ин ҳуҷҷат дастурҳои муфассали насбро барои системаи видеодомофони CAME AGT V + LITHOS пешниҳод мекунад. Он идентификатсияи ҷузъҳо, мушаххасоти техникӣ, диаграммаҳои интиқол ва тартиби барномасозиро ҳам барои қабулкунандаи видеои дохилии AGT V ва ҳам панели вуруди LITHOS фаро мегирад.
	CAME PLX Дастури насб ва конфигуратсияи қабулкунаки аудиоии дохилии интерком Дастурҳои муфассал оид ба насб, конфигуратсия ва истифодаи CAME PLX A қабулкунаки дохилии аудио, аз ҷумла мушаххасоти техникӣ ва пайвастшавӣ собиқamples.
	ОМАД AGT A ва AGT A EVO Дастури насб ва танзимот Дастури муфассал барои насб ва конфигуратсияи CAME AGT A ва AGT A EVO қабулкунакҳои аудиоӣ ва интеркомҳо, аз ҷумла маълумоти техникӣ, пайвастшавӣ собиқamples, ва танзимоти оҳанг.
	CAME Hendrix 1 Radio Transmitter Manual This document provides technical specifications, operating instructions, and safety guidelines for the CAME Hendrix 1 radio transmitter. It covers programming, duplication, and battery replacement for various CAME automation systems.
	Идоракунии дурдасти TOPD4FPS омад: Дастурҳои модели кодро ислоҳ кунед Дастурҳо оид ба барномасозии CAME TOPD4FPS Fix Code модели идоракунии дурдасти (код. 806TS-0105), аз ҷумла иваз кардани батарея ва мутобиқати модел.

CAME 68025500