Маҳсулот ба охир расидview
The KATOOL PMRL-200 is a robust and portable two-post garage lift designed for vehicle maintenance. It features a 7000 lbs (3175 kg) lifting capacity, screw-on pads, and extension support adaptors for versatile use. The lift is equipped with a single point lock release and an adjustable lifting height, making it suitable for various vehicle types and service needs. It operates with a top-level hydraulic system (220V/60HZ/1PH) and is CE Approved and Certified, having undergone rigorous dynamic (115%) and static (150%) loading capacity tests to ensure safety and reliability.
Image: The KATOOL PMRL-200 portable two-post garage lift shown with a vehicle elevated, demonstrating its lifting capability. The hydraulic power unit is visible next to one of the lift columns.
Хусусиятҳои асосӣ
- 7000 lbs (3175 kg) Lifting Capacity: Designed to safely lift a wide range of passenger vehicles and light trucks.
- Screw-on Pad and Extension Support Adaptors: Provides flexible and secure contact points for various vehicle frames.
- 4-inch Single Point Lock Release: Simplifies operation and enhances safety during lifting and lowering.
- Adjustable Lifting Height: Allows for easy access to different parts of the vehicle for maintenance and repair.
- Top-Level Hydraulic System: Ensures smooth and reliable lifting performance.
- CE Approved and Certified: Meets European safety standards, tested for 115% dynamic loading capacity and 150% static loading capacity.
Танзим ва васлкунӣ
Proper setup is crucial for the safe and efficient operation of your KATOOL PMRL-200 lift. Ensure you have adequate space and a level, solid concrete floor capable of supporting the lift's weight and the maximum load.
Кушодан ва муайянкунии ҷузъҳо
Carefully unpack all components and verify against the packing list. Identify the main parts:
- Two lift columns
- Four lifting arms with screw-on pads
- Height extension adaptors
- Агрегати гидротехники
- Oil tube and hydraulic hoses
- Fasteners and small parts
Image: All major components of the PMRL-200 lift, including the two columns, lifting arms, height extensions, hydraulic power unit, and oil tube, laid out for identification prior to assembly.
Қадамҳои насб (Хулоса)
- Position the two columns on a level surface, ensuring proper spacing as per the detailed installation guide (refer to full manual for precise measurements).
- Connect the hydraulic power unit to the columns using the provided oil tube and hoses.
- Install the lifting arms onto the columns.
- Connect the electrical power to the hydraulic unit (220V/60HZ/1PH).
- Perform initial functional tests without a load to ensure all systems are operating correctly.
Тасвир: Муфассал view of the hydraulic power unit for the KATOOL PMRL-200 lift, showing the motor, reservoir, and control lever.
Дастурҳои амалиётӣ
Тайёр кардани Мошин
- Ensure the vehicle is positioned centrally between the two lift columns.
- Adjust the lifting arms to align with the vehicle's designated lifting points. Use the screw-on pads and height extensions as needed.
Тасвир: фронт view of a car correctly positioned on the KATOOL PMRL-200 lift, ready for elevation. The lift arms are extended to support the vehicle.
Баланд бардоштани Мошин
- Activate the hydraulic power unit to begin lifting.
- Monitor the vehicle as it rises, ensuring it remains stable and level.
- Once the desired height is reached, engage the safety locks. The lift has a single point lock release for ease of use.
- Slightly lower the vehicle onto the safety locks to ensure it is securely supported before beginning work.
Image: The KATOOL PMRL-200 lift shown supporting an 8000 lbs (3628 kg) blue container, demonstrating its tested load capacity. This image highlights the lift's structural integrity under heavy loads.
Поён кардани Мошин
- Slightly raise the vehicle off the safety locks.
- Disengage the single point lock release.
- Slowly lower the vehicle to the ground, ensuring no obstructions are present.
- Once fully lowered, retract the lifting arms and remove the vehicle.
Video: This video demonstrates the operation of the KATOOL PMRL-200 two-post lift, including the process of lifting and lowering a vehicle. It also showcases the lift's 8000 lbs load test and the laser guidance system for vehicle positioning.
Нигоҳдорӣ
Regular maintenance ensures the longevity and safe operation of your KATOOL PMRL-200 lift.
- Санҷишҳои ҳаррӯза: Inspect hydraulic hoses for leaks, check lifting pads for wear, and ensure all safety locks engage properly.
- Санҷишҳои ҳафтаина: Lubricate all moving parts, including chains and pulleys, with appropriate grease. Check hydraulic fluid levels and top up if necessary.
- Санҷишҳои моҳона: Inspect all electrical connections for tightness and signs of wear. Check the integrity of the lift columns and arms for any damage or deformation.
- Санҷиши солона: A qualified technician should perform a comprehensive inspection of the entire lift system, including hydraulic components, electrical system, and structural integrity.
Тасвир: Нақшаи наздик view of the screw-on pad and extension support adaptor, highlighting the adjustable components that make contact with the vehicle's lifting points.
Мушкилкушо
| Мушкилот | Сабаби эҳтимолӣ | Ҳалли |
|---|---|---|
| Лифт боло намеравад | No power to hydraulic unit; Low hydraulic fluid; Air in hydraulic system; Motor issue. | Check power supply and circuit breaker; Fill hydraulic reservoir; Bleed air from system; Consult qualified technician. |
| Лифт оҳиста ё нобаробар паст мешавад | Hydraulic fluid leak; Obstruction in lowering valve; Uneven load distribution. | Inspect for leaks and repair; Check and clear lowering valve; Re-position vehicle for balanced load. |
| Садои аз ҳад зиёд ҳангоми кор | Low hydraulic fluid; Worn bearings or chains; Loose components. | Check and fill fluid; Inspect and replace worn parts; Tighten all fasteners. |
For issues not listed or if solutions do not resolve the problem, please contact KATOOL customer support.
Мушаххасоти
| Хусусият | Тафсилот |
|---|---|
| Рақами модел | PMRL-200 |
| Бренд | КАТООЛ |
| Иқтидори борбардорӣ | 7000 фунт (3175 кг) |
| Tested Load Capacity | 8000 фунт (3628 кг) |
| Баландии ҳадди ақали бардоред | 4.1 инч (10.4 см) |
| Баландии ҳадди аксар бардоштан | 72 инч (182.9 см) |
| Ҳаҷми воҳиди барқtage | 220V/60HZ/1PH |
| Андозаҳои маҳсулот (L x W x H) | 72.83 x 35.04 x 25 инч (185 x 89 x 63.5 см) |
| Вазни ашё | 8000 pounds (3628 kg) - Note: This appears to be the shipping weight or gross weight, not the operational weight of the lift itself. |
| Сертификатсияҳо | CE тасдиқ карда шудааст |
| Кишвари аслӣ | Хитой |
Кафолат ва дастгирӣ
For warranty information, please refer to the documentation included with your purchase or contact KATOOL customer service directly. Keep your proof of purchase for any warranty claims.
For technical support, troubleshooting assistance, or spare parts inquiries, please visit the official KATOOL website or contact their customer support team. Contact details can typically be found on the product packaging or the brand's official online presence.
KATOOL Store: Visit KATOOL Store on Amazon
