Муқаддима
This manual provides detailed instructions for the safe and effective use of your CJ TECH 750mA Automatic Float Battery Charger/Maintainer, Model 25305-EV. This device is designed to charge and maintain 6V and 12V lead-acid batteries, including AGM and GEL types, ensuring optimal battery performance and extending battery life. Please read this manual thoroughly before operation and retain it for future reference.
Маълумот оид ба бехатарӣ
Огоҳӣ: Ҳама огоҳиҳо ва дастурҳои бехатариро хонед. Риоя накардани огоҳиҳо ва дастурҳо метавонад боиси зарбаи барқ, сӯхтор ва/ё ҷароҳати вазнин гардад.
- Always operate the charger in a well-ventilated area.
- Avoid sparks, flames, or smoking near the battery during charging, as batteries can produce explosive gases.
- Ҳангоми кор бо батареяҳо муҳофизати чашм ва либоси муҳофизатӣ пӯшед.
- Disconnect the AC power supply before making or breaking connections to the battery.
- This charger is designed for 6V and 12V lead-acid batteries only. Do not use it to charge dry-cell batteries that are commonly used with home appliances, as these may burst and cause injury to persons and damage to property.
- Keep the charger and its components out of reach of children.
- The charger has an IP64 water-resistant rating, meaning it is protected from dust and splashing water. It is not designed to be submerged in water.
- Do not operate the charger if it has received a sharp blow, been dropped, or otherwise damaged.
Мундариҷаи баста
Боварӣ ҳосил кунед, ки ҳама ашё дар бастаи шумо мавҷуданд:
- CJ TECH 750mA Automatic Float Battery Charger/Maintainer Unit
- Батарея Clamp Пайвасткунак
- Пайвасткунаки терминал
Image: The CJ TECH 750mA Automatic Float Battery Charger unit shown with its two interchangeable connection accessories: battery clampпайвасткунакҳои терминалҳои s ва ҳалқа.
Маҳсулот ба охир расидview
The CJ TECH 750mA Automatic Float Battery Charger/Maintainer is a compact and durable device designed for efficient battery care. It features automatic voltage detection and multiple safety protections.
Нишондиҳандаҳои LED
- LED СУРХ: Нишон медиҳад, ки батарея ҳоло пур карда мешавад.
- САБЗ LED: Indicates the battery is fully charged and the charger is in maintenance (float) mode.
Тасвир: Муфассал view of the charger unit, highlighting the LED indicators for 'CHARGING' (red) and 'STORAGE' (green), along with input/output specifications.
Ташкил кардан
- Ҳаҷми батареяро муайян кунедtage: Determine if your battery is 6V or 12V. The charger automatically detects the voltage once connected.
- Choose Connector: Select either the battery clamp connector or the ring terminal connector based on your battery's terminals.
- Ба батарея пайваст шавед:
- Пайваст кунед СУРХ positive (+) connector to the positive (+) battery terminal.
- Пайваст кунед СИЁХ negative (-) connector to the negative (-) battery terminal.
Ensure a secure connection. Avoid touching the positive and negative connectors together.
- Ба қувваи AC пайваст шавед: Plug the charger's AC power cord into a standard 100-240V AC electrical outlet.
Image: The charger unit shown connected to an ATV battery using the battery clamp connectors, illustrating a typical setup scenario.
Дастурҳои амалиётӣ
The CJ TECH charger operates automatically once connected to a battery and power source.
- Ҷилди автоматӣtage Муайянкунӣ: The charger will automatically detect if the connected battery is 6V or 12V. It requires an activation voltage of 4V for 6V batteries and 8V for 12V batteries to begin charging.
- Реҷаи пуркунии барқ: When the battery is charging, the Сурх LED will illuminate. The charger delivers a constant current of 0.75A ±0.1A during this phase.
- Maintenance (Float) Mode: Once the battery reaches full charge, the charger automatically switches to maintenance mode, and the САБЗ LED will illuminate. In this mode, the charger provides a small, continuous current to keep the battery at optimal charge without overcharging, preventing sulfation and extending battery life.
- Қатъи алоқа: To disconnect the charger, first unplug it from the AC power outlet, then disconnect the negative (-) battery connector, followed by the positive (+) battery connector.
Image: An illustration showing the charger's connection diagram to a battery and AC power, alongside a table detailing input voltagд, ҳаҷми баромадtage, charging current, battery types, activation voltage, and housing protection.
Нигоҳдорӣ
Proper maintenance ensures the longevity and reliable operation of your charger and batteries.
- Тозакунӣ: Keep the charger unit clean and free from dust and debris. Use a dry cloth to wipe the exterior. Do not use solvents or abrasive cleaners.
- Санҷиши кабелӣ: Regularly inspect the power cord and battery connectors for any signs of damage, fraying, or corrosion. Replace damaged components immediately.
- Нигоҳдорӣ: Вақте ки истифода намебаред, пуркунандаи барқро дар ҷои хунук ва хушк, дур аз нури бевоситаи офтоб ва ҳарорати аз ҳад зиёд нигоҳ доред. Боварӣ ҳосил кунед, ки кабелҳо бодиққат печонида шудаанд, то аз осеб пешгирӣ карда шаванд.
- Нигоҳубини батарея: For optimal battery life, ensure battery terminals are clean and free of corrosion before connecting the charger.
Мушкилкушо
Агар шумо бо пуркунандаи барқи худ ба мушкилот дучор шавед, ба мушкилот ва роҳҳои ҳалли зерин муроҷиат кунед:
| Мушкилот | Сабаби эҳтимолӣ | Ҳалли |
|---|---|---|
| Charger not turning on / No LEDs illuminated | No AC power; Battery voltage too low for activation. | Check AC outlet and power cord connection. Ensure battery voltage is above 4V (for 6V) or 8V (for 12V). |
| RED LED stays on indefinitely | Battery is deeply discharged or damaged; Incorrect battery connection. | Allow more time for charging. Check battery connections for proper polarity. If the issue persists, the battery may be faulty. |
| GREEN LED is on, but battery seems low | Battery is faulty and cannot hold a charge. | Test the battery with a battery tester. The battery may need replacement. |
| Charger gets warm during operation | Фаъолияти муқаррарӣ. | A slight increase in temperature is normal during charging. Ensure adequate ventilation around the charger. |
Мушаххасоти
- Рақами модел: 25305-ЕВ
- Вуруди ҷилдиtage: AC 100-240В, 50/60Гц
- Натиҷаи ҳаҷtage: 6V DC / 12V DC (Automatic Detection)
- Ҷараёни пуркунии барқ: 0.75А ± 0.1А
- Намудҳои батарея: 6V/12V Lead-Acid Batteries (AGM, GEL)
- Activation Voltage: 4V for 6V batteries, 8V for 12V batteries
- Муҳофизати манзил: IP64 ба об тобовар
- Андозаҳои маҳсулот: 3 x 3 x 5 инч
- Вазни ашё: 9.9 унция
- Сертификатсияҳо: CETL / CE-EMC / CE-LVD / ROHS
Кафолат ва дастгирӣ
For warranty information or technical support, please refer to the documentation included with your purchase or contact CJ TECH customer service. Keep your proof of purchase for warranty claims.
