Муқаддима
This manual provides detailed instructions for the safe installation, operation, and maintenance of your BESTTEN 3-Way Decorator Wall Light Switch. Please read all instructions carefully before beginning installation and retain this manual for future reference. This switch is designed for use in both single-pole and 3-way circuits, allowing control of a light fixture from one or two locations.
Тасвир: тамомview of BESTTEN 3-Way Decorator Wall Light Switches with included wallplates.
Маълумот оид ба бехатарӣ
WARNING: RISK OF ELECTRIC SHOCK. IMPROPER INSTALLATION CAN RESULT IN SERIOUS INJURY OR DEATH.
- Пеш аз васл кардани симҳо, ҳамеша барқро дар қуттии фишанг ё автомати автоматӣ хомӯш кунед.
- Verify power is off before proceeding with installation.
- Мувофиқи ҳама рамзҳои электрикии миллӣ ва маҳаллӣ насб кунед.
- Агар шумо ба ягон қисми ин дастурҳо боварӣ надошта бошед, ба электрики ботаҷриба муроҷиат кунед.
- Do not use with loads exceeding the specified ratings (15A, 120V/277V).
- Ин дастгоҳ танҳо барои истифодаи дарунӣ пешбинӣ шудааст.
Мундариҷаи баста
- Калиди чароғҳои девории ороишии сеҷонибаи BESTTEN
- Matching Decorator Wallplate(s)
- Виддаҳои васлкунӣ
Мушаххасоти
| Мушаххасоти | Арзиш |
|---|---|
| Рақами модел | USP-LS03-10PK |
| Режими амалиёт | ХОМӮШ НАБУД |
| Рейтинги ҷорӣ | 15 Amps |
| Ҷилди амалиётӣtage | 120 Вольт / 277 Вольт |
| Навъи тамос | Нигоҳдорӣ |
| Навъи пайвасткунанда | Бурида |
| Терминал | Бурида |
| Навъи схема | 3-way (also compatible with Single Pole) |
| Навъи фаъолкунанда | Рокер |
| Андозаҳои маҳсулот | 2.91 x 4.69 x 1.28 инч |
| Материал | Impact-resistant polycarbonate thermoplastic and solid steel |
| Сертификатсияҳо | UL номбар шудааст |
Image: Physical dimensions of the switch and wallplate.
Насб ва насб
Before beginning, ensure the power is OFF at the circuit breaker. This switch can be used for both single-pole and 3-way applications.
Wiring Terminals Overview
Image: Detailed back view of the switch illustrating screw and push-in terminals.
- Black Screw: Connects to the Hot/Line wire or the Hot/Load wire.
- Brass Screws: Connect to the Traveler wires in a 3-way circuit.
- Green Screw: Connects to the Ground wire.
- Quick Push-in Terminals: Accept 14 AWG solid copper wire only. Terminal screws accept up to 12 AWG.
3-Way Circuit Wiring Diagram
A 3-way switch allows control of a single light fixture from two different locations. This setup requires two 3-way switches.
Image: Standard 3-way wiring configuration.
- Хомӯш кардани барқ: Locate the circuit breaker controlling the switch and turn it OFF. Verify power is off using a voltagсанҷанда
- Муайян кардани симҳо: In a 3-way setup, you will typically find a Hot/Line wire, a Hot/Load wire, two Traveler wires, and a Ground wire. Label them if necessary.
- Пайваст кардани сими заминӣ: Connect the bare copper or green insulated ground wire from the wall box to the green ground screw on the switch.
- Пайваст кардани симҳои сайёҳӣ: Connect the two traveler wires to the two brass screws on the switch. Ensure consistency between both 3-way switches (e.g., if one traveler is connected to the top brass screw on the first switch, connect it to the top brass screw on the second switch).
- Connect Hot/Line or Hot/Load Wire: Connect the Hot/Line wire (from the power source) to the black screw on the first 3-way switch. Connect the Hot/Load wire (going to the light fixture) to the black screw on the second 3-way switch.
- Secure Switch: Carefully fold the wires into the electrical box. Mount the switch to the box using the provided screws.
- Пластинаи деворро насб кунед: Лавҳаи девори ороишгариро ба болои коммутатор часпонед.
- Барқарор кардани қудрат: Қувваи барқро дар автомати автоматӣ аз нав фаъол созед.
Single Pole Circuit Wiring
For single-pole applications, the switch controls a light fixture from one location. Connect the Hot/Line wire to one black screw and the Hot/Load wire to the other black screw. Connect the ground wire to the green screw. The brass screws are not used in a single-pole configuration.
Дастурҳои амалиётӣ
The BESTTEN 3-Way Decorator Wall Light Switch features a simple rocker paddle for operation.
- Press the top of the paddle to turn the connected light fixture ON.
- Press the bottom of the paddle to turn the connected light fixture OFF.
Image: Switch installed in a room, demonstrating its aesthetic integration.
Нигоҳдорӣ
- Тозакунӣ: To clean the switch and wallplate, wipe with a soft, damp матоъ. Тозакунанда ё ҳалкунандаҳои абразивиро истифода набаред. Боварӣ ҳосил кунед, ки пеш аз тоза кардани барқ хомӯш аст.
- Санҷиш: Periodically inspect the switch and wallplate for any signs of damage or wear. If damage is observed, turn off power and replace the switch.
Мушкилкушо
| Мушкилот | Сабаби эҳтимолӣ | Ҳалли |
|---|---|---|
| Чароғ фурӯзон/хомӯш намешавад | No power to the switch | Check the circuit breaker and ensure it is ON. |
| Ноқилҳои фуҷур ё нодуруст | Turn off power. Recheck all wire connections according to the wiring diagram. Ensure wires are securely fastened to terminals. | |
| Лампаи чароғаки нодуруст | Лампочкаи электрро иваз кунед. | |
| Switch feels loose in the wall box | Mounting screws are not tightened | Қувваро хомӯш кунед. Винтҳои васлкуниро, ки калидро ба қуттии барқӣ мустаҳкам мекунанд, маҳкам кунед. |
| Wallplate does not fit correctly | Switch not properly aligned or incorrect wallplate | Ensure the switch is centered and flush within the electrical box. Verify you are using the correct decorator-style wallplate. |
Кафолат ва дастгирӣ
BESTTEN products are manufactured to high-quality standards. For warranty information or technical support, please refer to the contact information provided with your purchase or visit the official BESTTEN webсайт.
For additional product information or to explore other BESTTEN electrical solutions, please visit the BESTTEN Store on Amazon.
