Муқаддима
Thank you for choosing the Geevon DCF 246258 Wireless Weather Station. This device provides accurate indoor and outdoor temperature and humidity readings, along with a 12-hour weather forecast, moon phase display, and a radio-controlled clock with alarm functions. Please read this manual carefully to ensure proper setup and operation.
Мундариҷаи баста
- 1 x Main Weather Station Unit
- 1 x Сенсори бесими берунӣ
- 1 x Power Adapter Cable
- 1 x Дастури корбар
- 5 x AAA Batteries (3 for main unit, 2 for sensor)
Маҳсулот ба охир расидview
The Geevon DCF 246258 features a large, easy-to-read color display and a compact outdoor sensor. Below are key components and their functions.
Image: The main weather station unit, wireless outdoor sensor, and AAA batteries.
Image: Dimensions of the weather station, measuring 28.5 cm in width and 10.7 cm in height.
Main Unit Display Features
- Намоиши вақт: Radio-controlled time with AM/PM indicator and Daylight Saving Time (DST) function.
- Намоиши ҳушдор: Indicates active alarms.
- Calendar & Weekday: Displays current date and day of the week.
- Ҳарорати дарунӣ/берунӣ: Shows current temperature for both indoor and outdoor environments.
- Нишонаҳои пешгӯии обу ҳаво: Graphical representation of upcoming weather conditions (e.g., sunny, cloudy, rainy).
- Фишори барометрӣ: Displays current atmospheric pressure.
- Indoor/Outdoor Comfort Display: Indicates comfort levels based on temperature and humidity.
- Намӣ дар дохили бино/берун: Shows current humidity levels.
Тасвир: Қафо view of the main unit, highlighting the MODE, ALARM, ALERT, CH, UP, and DOWN buttons, along with the 3xAAA battery compartment and integrated hang holes.
Main Unit Buttons
- Тугмаи MODE: Used to switch display modes and confirm settings.
- Тугмаи ALARM: For setting and activating alarms.
- ALERT Button: To set temperature/humidity alerts.
- Тугмаи CH: To switch between outdoor sensor channels (if multiple sensors are used).
- Тугмаи боло: Барои афзоишasing values or navigating menus.
- Тугмаи поён: Барои фармонasing values or navigating menus.
Ташкил кардан
1. Насби батарея
- Воҳиди асосӣ: Open the battery compartment on the back of the main unit and insert 3 AAA batteries, observing the correct polarity.
- Сенсори беруна: Open the battery compartment on the back of the outdoor sensor and insert 2 AAA batteries, observing the correct polarity.
2. Initial Power-On and DCF Synchronization
After inserting batteries, the main unit will power on. It will automatically attempt to receive the DCF radio signal for time synchronization. During this initial 10-minute period, it is recommended not to operate the main unit to allow for successful signal reception.
Image: The weather station's automatic DCF time setting feature, which also supports Daylight Saving Time. The backlight temporarily turns off during RCC signal reception.
3. Ҷойгиркунии сенсорҳои беруна
Place the outdoor sensor within a 60-meter wireless transmission range of the main unit. For accurate readings, ensure the sensor is:
- Дур аз нурҳои бевоситаи офтоб.
- Protected from rain and direct moisture.
- In a location with good air circulation.
Дастурҳои амалиётӣ
Намоиши маълумот
The large color display provides a comprehensive overview of current conditions:
- Вақт ва сана: Automatically updated via DCF signal.
- Indoor/Outdoor Temperature & Humidity: Real-time readings.
- 12-Hour Weather Forecast: Based on temperature, humidity, and barometric pressure changes.
- Марҳилаи моҳ: Displays the current lunar phase.
- Нишондиҳандаи бароҳатии ҳаво: Shows comfort levels (COM, WET, DRY) based on indoor temperature and humidity.
Image: The air comfort indicator on the display. 'COM' (Comfort) indicates temperature between 20-28°C and humidity between 40-70%. 'WET' indicates humidity above 70%. 'DRY' indicates humidity below 40%.
Нури равшании танзимшаванда
The main unit features 3 levels of adjustable backlight brightness. To enable continuous backlight, the unit must be connected to the power adapter. When operating on batteries alone, the display will turn off after 15 seconds to conserve energy.
Тасвир: Мисamples of the 3-level adjustable backlight: Off (no light to disturb sleep), Low (soft night light for clear reading), and High (bright light for easy night reading). Requires power adapter for continuous illumination.
Функсияи ҳушдор ва боздорӣ
The weather station includes an alarm clock with a 5-minute snooze function.
- Танзими ҳушдор: Use the ALARM button to enter alarm setting mode, then use UP/DOWN buttons to adjust the time.
- Activating Snooze: When the alarm sounds, press the SNZ/LIGHT button to activate the 5-minute snooze.
- Хомӯш кардани сигнализатсия: Press any button other than SNZ/LIGHT to turn off the alarm.
Image: The radio alarm clock with a 5-minute snooze function. Pressing any button except SNZ/LIGHT will turn off the alarm.
Temperature/Humidity Alerts
Set customizable high/low temperature alerts using the ALERT button. The station will notify you if readings exceed or fall below your set thresholds.
Multi-Channel Monitoring
The weather station supports up to 3 remote sensors (one sensor is included). Use the CH button to cycle through the channels and view temperature and humidity from different locations.
Нигоҳдорӣ
Иваз кардани батарея
A low battery indicator will appear on the display when batteries need to be replaced. Replace all batteries in the main unit or sensor simultaneously with new AAA batteries.
Тозакунӣ
Wipe the main unit and sensor with a soft, dry cloth. Do not use abrasive cleaners or solvents.
Муҳофизати сенсор
Ensure the outdoor sensor remains protected from direct sunlight and heavy rain to maintain accuracy and prolong its lifespan.
Мушкилкушо
- No DCF Signal: Ensure the unit is not near sources of interference (e.g., electronics, metal structures). Try repositioning the unit. The backlight temporarily turns off during RCC signal reception, which is normal.
- Incorrect Temperature/Humidity: Verify the outdoor sensor is placed correctly, away from direct sunlight and rain. Ensure fresh batteries are installed in both units.
- Display Not Visible/Dim: Check if the power adapter is connected for continuous backlight. If running on batteries, the display will turn off after 15 seconds. Replace batteries if the low battery indicator is on.
- Сенсори беруна пайваст намешавад: Ensure the sensor is within the 60m range. Re-sync the sensor by removing and reinserting its batteries, then pressing the CH button on the main unit to search for the signal.
Мушаххасоти
| Рақами модел | 246258 |
| Андозаҳо (L x W x H) | 28.5 х 2.5 х 10.7 см |
| Вазн | 520 грамм |
| Манбаи нерӯ | 5 x AAA batteries (included) or Power Adapter |
| Технологияи пайвастшавӣ | 433 МГс, 868 МГс |
| Материал | Акрилонитрил бутадиен стирен (ABS), металл |
| Хусусиятҳои махсус | Alarm, Large Display, Clock, Adjustable Brightness, Wireless |
| Истифодаи маҳсулоти тавсияшаванда | Home, Office, Laboratory |
Кафолат ва дастгирӣ
For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official Geevon webсайт. Квитансияи хариди худро барои даъвоҳои кафолат нигоҳ доред.
