Хаски 91308

Husky 850 Lumens Dual-Power LED Rechargeable Headlamp Дастури корбар

Модели: 91308

Муқаддима

The Husky 850 Lumens Dual-Power LED Rechargeable Headlamp is designed to provide versatile and powerful illumination for various tasks, from personal lighting to larger job site requirements. This headlamp integrates advanced LED and COB (Chip-on-Board) technology to deliver exceptional brightness and adaptable beam patterns. It features a dual-power system, allowing operation with either the included rechargeable battery or standard AAA alkaline batteries, ensuring continuous functionality.

Husky 850 Lumens Dual-Power LED Rechargeable Headlamp

Image: The Husky 850 Lumens Dual-Power LED Rechargeable Headlamp, намоишasing дорои тарҳи паймон ва тасмаи танзимшаванда мебошад.

Хусусиятҳои маҳсулот

Ташкил кардан

Насб ва барқгирии батарея

  1. Батареяи барқгиранда: Сарлавҳаamp comes with a pre-installed rechargeable lithium-polymer battery. To charge, connect the included USB Type-C cable to the headlamp's charging port and to a compatible USB power source. The charging indicator will show the charging status. A full charge typically takes approximately 2 hours.
  2. Порти пуркунандаи USB-C

    Тасвир: Наздик view аз сарamp's USB-C charging port, indicating where to connect the charging cable.

  3. AAA Alkaline Batteries (Optional): For alternative power, open the battery compartment and insert three AAA alkaline batteries (not included), ensuring correct polarity (+/-). Close the compartment securely.

Танзими тасмаи сар

Сарлавҳаamp features an adjustable elastic strap for a comfortable and secure fit. To adjust, slide the buckles on either side of the strap until the headlamp sits snugly on your head without being too tight. Ensure the headlamp unit is centered on your forehead.

Тасмори сари танзимшаванда

Image: Detail of the adjustable head strap, highlighting its comfort and fit features.

Дастурҳои амалиётӣ

Фаъол/хомӯш ва интихоби режим

Сарлавҳаamp is operated via a single power button located on the top of the unit.

8 Light Modes and Smart Memory

Image: Diagram illustrating the 8 light modes and the Smart Memory feature, showing the button layout.

Тозакунии тағирёбанда

Some light modes support variable dimming. To adjust brightness, press and hold the power button while the headlamp is in a dimmable mode. The light intensity will gradually increase or decrease. Release the button when the desired brightness is reached.

Тилти танзимшаванда

Сарлавҳаamp unit can be tilted up or down to direct the light beam precisely where needed. This feature helps in controlling light dispersion and preventing blinding others, especially in close quarters.

Adjustable Tilt Feature

Image: Illustration demonstrating the adjustable tilt mechanism of the headlamp, showing its range of motion.

Нигоҳдорӣ

Тозакунӣ

Барои тоза кардани сарamp, онро бо матои нарм пок кунедamp матоъ. Тозакунандаҳо ё ҳалкунандаҳои абразивӣ истифода набаред, зеро онҳо метавонанд ба дастгоҳ зарар расонанд. Пеш аз тоза кардан ё дучор шудан ба намӣ, боварӣ ҳосил кунед, ки сарпӯши порти пуркунӣ маҳкам пӯшида шудааст.

Нигоҳдорӣ

Ҳангоми нигоҳдории сарпӯшamp for extended periods, especially if using AAA alkaline batteries, remove the batteries to prevent leakage and potential damage to the unit. Store the headlamp дар ҷои хунук ва хушк дур аз нури бевоситаи офтоб ва ҳарорати аз ҳад зиёд.

Муқовимат ба об

Сарлавҳаamp has an IP54 water-resistance rating, meaning it is protected against dust ingress and splashing water from any direction. It is not designed for submersion in water.

Мушкилкушо

МушкилотСабаби эҳтимолӣҲалли
Сарлавҳаamp фурӯзон намешавад.Батарея тамом шудааст ё нодуруст насб шудааст.Recharge the lithium-polymer battery or replace AAA alkaline batteries, ensuring correct polarity.
Нур хира аст ё милт-милт мекунад.Нархи батареяи кам.Recharge the lithium-polymer battery or replace AAA alkaline batteries.
Сарлавҳаamp пардохт намекунад.Масъалаи пур кардани сим ё манбаи барқ.Ensure the USB-C cable is properly connected and the power source is functional. Try a different cable or power adapter.
Cannot cycle through all modes.Button not pressed correctly or internal issue.Ensure a firm, single press for mode cycling. If issue persists, contact customer support.

Мушаххасоти

ХусусиятТафсилот
Рақами модел91308
Навъи манбаи нурLED, COB
Brightness (Turbo Mode)900 люмен
Brightness (Spot+Flood)1000 люмен
Brightness (High Spot)500 люмен
Brightness (High Flood)100 люмен
Brightness (ECO Mode)10 люмен
Beam Distance (Max)80 метр (87 ярд)
Run-time (ECO Mode)36 соат
Run-time (Spot+Flood)8 соат
Run-time (High Spot)13 соат
Run-time (High Flood)45 соат
Манбаи нерӯRechargeable Lithium-Polymer Battery (1100mAh, 3.7V) or 3 AAA Alkaline Batteries (not included)
Вақти пуркунии барқТақрибан 2 соат (тавассути USB-C)
Рейтинги муқовимат ба обIP54
МатериалПластмасса
Андоза (D x W x H)1.97" x 4.19" x 2.69"
Вазни ашё13.9 унция
FL1 Standards Performance Table

Image: Performance table based on FL1 standards, showing lumens, run time, and beam distance for various modes.

Кафолат ва дастгирӣ

Маълумот дар бораи кафолат

This Husky headlamp аз ҷониби а Кафолати якумрӣ. For specific details regarding warranty coverage and claims, please refer to the warranty documentation included with your product or visit the official Husky tools webсайт.

Дастгирии муштариён

If you encounter any issues or have questions regarding the operation, maintenance, or troubleshooting of your Husky 850 Lumens Dual-Power LED Rechargeable Headlamp, please contact Husky customer support. Contact information can typically be found on the product packaging or the official Husky webсайт.