ALIENTEK DM40C Digital Multimeter, Oscilloscope, and Signal Generator User Manual

1. Муқаддима

Thank you for choosing the ALIENTEK DM40C. This device is a professional 4.5-digit digital multimeter, oscilloscope, and signal generator integrated into a single handheld unit. It offers high precision measurements, a 50M sample rate oscilloscope, and various waveform generation capabilities, making it suitable for a wide range of electrical testing and diagnostic applications.

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your DM40C device. Please read it thoroughly before use.

2. Маълумот оид ба бехатарӣ

Always observe safety precautions when using electrical testing equipment to prevent personal injury or damage to the device.

• Бехатарии умумӣ: Ensure the device is in good working condition before use. Do not operate if damaged.
• Ҷилдиtage андозагирӣ: For DC-DC or high voltage measurements above 36V, it is recommended to use the АВТО+ mode. This mode skips the millivolt (mV) range to prevent mismeasurement, sparking, and potential damage. The default AUTO mode includes the mV range, which may not be suitable for higher voltages.
• MCX Connector Usage: The MCX pin sizes for the alligator clip and oscilloscope probe differ. The alligator clip's inner pin is larger. Do not attach the alligator clip to the CHA/CHB (oscilloscope analog channels). The alligator clip is intended only for the OUT channel (waveform output) to avoid poor contact or damage to the oscilloscope's analog channels.
• Андозаи ҷорӣ: Ensure the circuit is de-energized before connecting the device for current measurements.
• Симҳо: The unit is fused. If a fuse blows, replace it with one of the specified type and rating.
• Роҳбарони санҷиш: Use only the provided or equivalent high-quality test leads. The included leads are fine-tipped, suitable for small electronics. For higher-current or heavier work, consider investing in more robust leads.

3. Маҳсулот ба охир расидview

The ALIENTEK DM40C combines three essential tools into one compact device: a digital multimeter, an oscilloscope, and a signal generator. It features a high-resolution IPS touchscreen for clear data display and intuitive control.

Расми 3.1: The ALIENTEK DM40C unit shown with its standard accessories, including test leads, probe leads, and a USB-C cable.

Расми 3.2: This image illustrates the core capabilities of the DM40C: a high-precision multimeter, a 10-bit ADC oscilloscope with 50M sampling rate, and a signal generator.

Хусусиятҳои асосӣ:

• Мултиметр: 4.5-digit (59999 count) with high precision and 5ppm reference source.
• Осциллограф: 10-bit ADC, 50MHz sampling rate, 10MHz bandwidth, 64kpts memory.
• Генератори сигнал: Generates various waveforms (Sine, Sawtooth, Triangular, Square).
• Намоиш: 3.5-inch IPS touchscreen (480x320 resolution).
• Қувва: Rechargeable battery providing over 10 hours of operation.

Расми 3.3: The device features a 3.5-inch IPS touchscreen (480x320 resolution) for clear display and intuitive interaction.

4. Танзимот

4.1. Пуркунии батарея

The DM40C is powered by an internal rechargeable battery. Before first use, fully charge the device using the provided USB-C cable and a compatible USB power adapter (not included). The charging indicator on the device will show the charging status.

4.2. Пайваст кардани рахҳои санҷишӣ

Connect the test leads to the appropriate input jacks on the right side of the device. The common (COM) jack is typically used for the black lead. The VΩHz°C jack is for voltage, resistance, frequency, and temperature measurements. The A mA uA jack is for current measurements. Ensure connections are secure.

4.3. Фаъолсозии ибтидоӣ

Press and hold the power button to turn on the device. The IPS touchscreen will illuminate, displaying the main interface. Follow any on-screen prompts for initial setup or calibration if presented.

5. Дастурҳои истифодабарӣ

5.1. Амалиёти умумӣ

• Фаъол / Хомӯш: Тугмаи барқро пахш карда нигоҳ доред.
• Навигатсия меню: Use the touchscreen to navigate through menus and select functions.
• Нигоҳ доштани маълумот: Freeze the current reading on the display.
• Relative Measurement (RLE): Measure the difference between a stored reference value and the current reading.
• Бақайдгирии маълумот: Record measurement data over time.
• Графики тамоюл: Visualize measurement data trends graphically.

5.2. Режими мултиметр

The DM40C offers a comprehensive range of multimeter functions. Select the desired measurement mode from the main interface.

Расми 5.1: The automatic measurement feature simplifies operation by automatically selecting the correct range for voltage (0.01mV-1000V DC, 0.01mV-750V AC) and current (0.01uA-10A) without manual mode switching.

• Андозаи автоматӣ: The device can automatically detect and select the appropriate range for voltage (DC: 0.01mV-1000V, AC: 0.01mV-750V) and current (0.01uA-10A).
• Ҷилдиtage Андоза (AC/DC): Connect leads to COM and VΩHz°C. Select AC or DC voltage mode. Remember to use АВТО+ барои ҳаҷми баландtage measurements (refer to Safety Information).
• Андозаи ҷорӣ (AC/DC): Connect leads to COM and A mA uA. Ensure the circuit is open and the device is connected in series. The innovative 3-hole design allows fully automatic current measurement across μA/mA/A ranges.
• Андозаи муқовимат: Connect leads to COM and VΩHz°C.
• Андозагирии иқтидор: Connect leads to COM and VΩHz°C.
• Санҷиши диод: Connect leads to COM and VΩHz°C. The device provides a 4-stage ҷtage drop measurement with distinct audible indicators.


Расми 5.2: This screen capture details the diode measurement function with multiple voltage drop indications and the fast continuity test feature, including resistor measurement capabilities.

• Санҷиши давомнокӣ: Connect leads to COM and VΩHz°C. An ultra-fast test with an audible indicator.
• Андозагирии басомад: Connect leads to COM and VΩHz°C.
• Андозаи ҳарорат: Requires a compatible temperature probe (not included). Connect the probe to the VΩHz°C and COM jacks.
• AC+DC Mixed Measurement: The DM40C supports simultaneous display of both AC and DC components for complex signals.


Расми 5.3: The display demonstrates the device's ability to perform True RMS measurements, simultaneously display AC and DC components, and visualize data trends over time with adjustable time bases.

5.3. Ҳолати осциллограф

The integrated oscilloscope provides waveform visualization and analysis. Connect the oscilloscope probe to the CHA/CHB input.

• Танзимоти асосӣ: Select oscilloscope mode from the main menu. Adjust vertical scale (V/div) and horizontal time base (s/div) as needed.
• Интиқол: Set trigger level and type (edge, pulse, etc.) to stabilize waveforms.
• Андозаҳо: The oscilloscope can display various waveform parameters such as peak-to-peak voltage, frequency, and duty cycle.

5.4. Ҳолати генератори сигнал

The DM40C can generate various test signals. Connect the output to the OUT channel using the alligator clip (refer to Safety Information regarding MCX connector usage).

• Интихоби шакли мавҷ: Choose from Sine wave, Sawtooth wave, Triangular wave, or Square wave.
• Танзими басомад: Set the desired output frequency (1Hz to 50KHz for most waveforms, up to 10MHz for square wave).
• AmpТанзими литуд: Adjust the peak-to-peak voltage (0.5Vpp to 3.0Vpp).
• Давраи вазифа: Adjustable for Square wave (0-100%).

6. Нигоҳдорӣ

6.1. Тозакунӣ

Дастгоҳро мунтазам бо нарм тоза кунед, гamp матоъ. Тозакунанда ё ҳалкунандаҳои абразивиро истифода набаред. Пеш аз тоза кардан, боварӣ ҳосил кунед, ки дастгоҳ хомӯш ва аз ҳама гуна манбаи барқ ​​ҷудо карда шудааст.

6.2. Нигоҳубини батарея

To prolong battery life, avoid fully discharging the battery frequently. If storing the device for an extended period, charge it to approximately 50% and store in a cool, dry place.

Расми 6.1: The DM40C incorporates safety isolation for multimeter communication and is powered by a rechargeable battery providing over 10 hours of operation.

6.3. Навсозии нармафзор

ALIENTEK may release firmware updates to add features or fix bugs. Check the official ALIENTEK website for the latest firmware and instructions on how to update your device. Exercise caution when installing third-party applications or firmware not directly from the manufacturer.

7. Баррасии мушкилот

• Дастгоҳ фаъол нест: Ensure the battery is charged. Connect the USB-C cable and attempt to power on while charging.
• Хониши нодуруст: Check test lead connections. Ensure the correct measurement mode is selected. Verify the battery level.
• No oscilloscope waveform: Check probe connection to CHA/CHB. Adjust vertical scale and time base. Verify trigger settings.
• Sparking during voltage андозагирӣ: Immediately switch to АВТО+ mode for high voltage measurements (above 36V) to prevent this. Refer to Safety Information.
• Damage to oscilloscope input: Ensure alligator clips are не connected to CHA/CHB. Alligator clips are for the OUT channel only. Refer to Safety Information.
• Масъалаҳои пайвасти Bluetooth: Ensure your device has the latest firmware (version 2.2 or higher for Bluetooth functionality, if available for your model). Note that Bluetooth may only support multimeter functions.

8. Мушаххасоти

The following table outlines the key specifications for the ALIENTEK DM40C.

Расми 8.1: A comprehensive table outlining the technical specifications, measurement ranges, and accuracy for the DM40A, DM40B, and DM40C models across various functions including voltagд, ҷараён, муқовимат, зарфият, басомад ва ҳарорат.

9. Кафолат ва дастгирӣ

ALIENTEK products are designed for reliability and performance. For warranty information, please refer to the documentation included with your purchase or visit the official ALIENTEK website. For technical support, troubleshooting assistance, or inquiries about replacement parts, please contact ALIENTEK customer service through their official channels.