Маълумоти муҳим оид ба бехатарӣ
Please read and understand all instructions before installing or operating this water heater. Failure to follow these instructions may result in property damage, personal injury, or death.
- This appliance must be installed by a qualified plumber or electrician in accordance with all local codes and regulations.
- Ensure the power supply matches the specifications of the unit (120V, 1440W).
- Do not operate the water heater if it is not filled with water.
- Install a temperature and pressure relief (T&P) valve as specified in the installation instructions.
- Блок накунед ё tamper with the T&P valve.
- Maintain proper clearances around the unit for ventilation and service.
- Пеш аз анҷом додани ҳама гуна хидматрасонӣ ё хидматрасонӣ барқро ҷудо кунед.
Маҳсулот ба охир расидview
The Ranein WarmCube 2.5 Gallon Electric Mini Tank Water Heater is designed to provide instant hot water at the point of use, reducing wait times and conserving energy. Its compact design allows for versatile installation in various settings.
Хусусиятҳои асосӣ
- Иқтидори 2.5 галлон: Stores heated water for immediate use.
- 1440W Heating Element: Provides rapid heating for on-demand hot water.
- Зарфи аз пӯлоди зангногир пойдору: Resists corrosion for extended product life.
- Triple-Layer Insulation: Features enamel coating, high-density insulation foam, and a reinforced decarburized steel plate for superior heat preservation and reduced energy loss.
- Термостат танзимшаванда: Allows precise temperature control up to 85°C (185°F).
- Бехатарии мукаммал: Includes high-temperature resistance, high-pressure resistance (up to 1.0 MPa), dry-burn protection, IPX4 waterproof rating, and advanced leakage prevention.
- Насбкунии универсалӣ: Can be installed under-sink, on a wall, or floor-mounted.
Унсурҳои воҳид
The water heater includes the main unit, a temperature and pressure relief (T&P) valve, mounting brackets, and screws.
Тасвир: Пеш view of the Ranein WarmCube 2.5 Gallon Electric Mini Tank Water Heater, showing the control knob and inlet/outlet connections.
Мушаххасоти
Detailed technical specifications for the Ranein WarmCube 2.5 Gallon Electric Mini Tank Water Heater.
| Мушаххасоти | Арзиш |
|---|---|
| Бренд | Ранеин |
| Рақами модел | RC25G-W |
| Иқтидор | 2.5 галлон |
| Ҷилдиtage | 120 вольт |
| Ватtage | 1440 Ватт |
| Ҳарорати максималӣ | 85°C (185°F) |
| Фишори максималии корӣ | 100 PSI (1.0 МПа) |
| Рейтинги обногузар | IPX4 |
| Андозаҳои маҳсулот (W x H x D) | 13.39" x 13.39" x 11.42" |
| Вазни ашё | 17.63 фунт |
| Навъи васлкунӣ | Фарш, Девор |
Image: Visual representation of the water heater's dimensions and key specifications, including capacity, voltage, power, max water pressure, weight, amperage, and waterproof grade.
Насбкунӣ
Пеш аз насб
- Verify that the installation location is suitable for the unit's size and weight when full.
- Ensure access to a standard 120V electrical outlet.
- Confirm that water supply lines are accessible and can be connected to the unit.
- Таъминоти асосии об ва қувваи барқро ба минтақаи насб қатъ кунед.
Имконоти васлкунӣ
The Ranein WarmCube 2.5 can be installed in several configurations:
- Under-Sink: Ideal for kitchens and bathrooms where space is limited.
- Ба девор насбшуда: Use the provided mounting brackets and screws to secure the unit to a sturdy wall surface.
- Floor-Mounted: Дастгоҳро дар сатҳи устувор ва ҳамвор ҷойгир кунед.
Image: Depicts the water heater installed under a sink and wall-mounted in a bathroom vanity, illustrating versatile placement options.
Пайвастҳои водопровод
- Install the provided Temperature and Pressure (T&P) relief valve into the designated port on the top of the water heater. Ensure a watertight seal using appropriate sealant (e.g., PTFE tape).
- Connect the cold water inlet (blue port) to your cold water supply line.
- Connect the hot water outlet (red port) to your hot water faucet or fixture.
- Open the hot water faucet at the fixture to allow air to escape from the tank as it fills with water.
- Once water flows steadily from the hot water faucet, close the faucet. Check all connections for leaks.
Video: Demonstrates the installation of the pressure relief valve onto the Ranein mini tank water heater, showing the proper threading and tightening process.
Пайвасти барқӣ
- Plug the water heater's power cord into a grounded 120V electrical outlet.
- Ensure the outlet is dedicated and properly rated for the appliance's wattagд (1440 Вт).
Амалиёт
Оғози ибтидоӣ
- After plumbing and electrical connections are complete and checked, turn on the electrical power to the unit.
- The heating indicator light will illuminate, indicating that the water heater is actively heating the water.
- Allow sufficient time for the water to reach the desired temperature.
Танзими ҳарорат
- The water heater features a front-mounted rotary knob for temperature adjustment.
- Rotate the knob clockwise to increase the temperature and counter-clockwise to decrease it.
- The temperature range is typically between 55°F (13°C) and 145°F (63°C). Adjust to a comfortable and safe level.
- For energy efficiency, consider setting the temperature to the lowest comfortable setting.
Image: Illustrates the temperature adjustment knob on the water heater, with examples of suitable temperatures for various uses like washing dishes, vegetables, brushing teeth, and washing face.
Нигоҳдорӣ
Нигоҳдории мунтазам кори оптималиро таъмин мекунад ва мӯҳлати хизмати гармкунаки шуморо дароз мекунад.
Нигоҳдории мунтазам
- Санҷиши солона: Have a qualified professional inspect the unit annually for any signs of wear, corrosion, or leaks.
- Санҷиши клапани T&P: Test the T&P relief valve at least once a year by lifting the lever. Ensure water flows freely and then reseats properly. If it does not, replace the valve.
- Тозакунии берунӣ: берунии агрегатро бо нарм тоза кардан дamp матоъ. Тозакунакҳои абразивиро истифода набаред.
Холи кардани танк
If the unit will be unused for an extended period or if there is a risk of freezing, drain the tank:
- Turn off the electrical power to the water heater.
- Turn off the cold water supply to the unit.
- Open a hot water faucet at a nearby fixture to relieve pressure.
- Carefully open the drain valve (if equipped) or disconnect the cold water inlet to allow the tank to drain.
- Once drained, leave the faucet open and the cold water inlet disconnected until ready to refill.
Мушкилкушо
Барои масъалаҳои умумӣ ва роҳҳои ҳалли эҳтимолии онҳо ба ҷадвали зер муроҷиат кунед.
| Мушкилот | Сабаби эҳтимолӣ | Ҳалли |
|---|---|---|
| Оби гарм нест | No power; Thermostat set too low; Heating element failure | Check power supply/breaker; Adjust thermostat; Contact customer support |
| Об ба қадри кофӣ гарм нест | Thermostat set too low; High hot water demand; Cold water mixing | Increase thermostat setting; Allow time for recovery; Check for cross-connection |
| Об аз ҳад гарм | Термостат хеле баланд гузошта шудааст | Танзими термостатро кам кунед |
| Leaking from T&P valve | Excessive pressure; Faulty valve | Check water pressure; Replace T&P valve |
| Агрегат садо медихад | Ҷамъшавии таҳшин дар зарф | Drain and flush the tank (refer to maintenance section) |
Кафолат ва дастгирӣ
Ranein products are manufactured to high-quality standards and are backed by a limited warranty. Please refer to the warranty card included with your purchase for specific terms and conditions.
For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact Ranein customer support through the retailer where the product was purchased or visit the official Ranein webсайт барои маълумоти тамос.
