1. Муқаддима
The AstroAI P8 4000A Jump Starter is a versatile and powerful device designed to provide reliable jump-starting for vehicles, act as a portable power bank, and offer emergency lighting. This manual provides essential information for safe and effective use of your device.
2. Маълумот оид ба бехатарӣ
ОГОҲӢ: Пеш аз истифодаи ин маҳсулот ҳамаи огоҳиҳо ва дастурҳои бехатариро хонед. Риоя накардани огоҳиҳо ва дастурҳо метавонад боиси зарбаи барқ, сӯхтор ва/ё ҷароҳати ҷиддӣ гардад.
- This car starter includes 10 built-in comprehensive protections for enhanced safety. These safety features include reverse polarity, overcurrent, overcharge, overdischarge, high & low temperature protection, reverse connection, over voltage, overload, short circuit, and spark-proof clamps.
- Do not attempt to jump start any engine that exceeds the maximum displacement supported by the jump starter (10L Gas or 8L Diesel).
- Do not crank the engine for more than 3 seconds at a time. Allow the jump starter to cool down for at least 1 minute between each start attempt.
- Ensure the device has at least 50% charge before use.
- Аз дастрасии кӯдакон дур нигоҳ доред.
- Маҳсулотро дар шароити борон ё тар намонед.
- Маҳсулотро ба қисмҳо ҷудо накунед.
Image: AstroAI P8 Jump Starter highlighting its 10 safety protections including reverse polarity, overcurrent, overcharge, overdischarge, high & low temperature protection, reverse connection, over voltage, overload, short circuit, and spark-proof clamps.
3. Мундариҷаи баста
- AstroAI P8 Jump Starter Unit
- Кабелҳои Smart Jumper
- Сими пуркунандаи USB-C
- Дастури корбар
- Халтаи нигоҳдорӣ
Image: The AstroAI P8 Jump Starter, smart jumper cables, USB-C charging cable, user manual, and a storage bag, laid out on a dark background.
4. Хусусиятҳои маҳсулот
- Оғози пурқувват: 4000A peak current for 10L gas and 8L diesel engines. Compatible with motorbikes, cars, SUVs, lawnmowers, tractors, and motorboats.
- Multifunctional Power Bank: USB-A output Port works with 5V⎓3A, 9V⎓2A, 12V⎓1.5A (QC 3.0). Serves as a reliable backup power source for electronic devices.
- Компакт ва сайёр: Size 7.20in*3.45in*1.53in (183mm*88mm*39mm) for easy carrying and storage in glove boxes and door pockets.
- Multi-Mode LED Flashlight: Provides 3 modes: illumination, SOS, and strobe for convenient lighting in various scenarios.
- Бехатарии ҳамаҷониба: 10 built-in protections for enhanced safety, including reverse polarity, overcurrent, overcharge, overdischarge, high & low temperature protection, reverse connection, over voltage, overload, short circuit, and spark-proof clamps.
Image: The AstroAI P8 Jump Starter demonstrating its three main functions: jump starter, power bank, and LED flashlight.
5. Маҳсулот ба охир расидview (компонентҳо)
The AstroAI P8 features a robust design with clearly marked ports and indicators for ease of use.
- Тугмаи барқ: Activates the device and checks battery level.
- Нишондиҳандаи сатҳи батарея: Displays the remaining charge.
- Порти кабели ҷумпер: For connecting the smart jumper cables.
- USB-A Output Ports (QC 3.0): Барои пур кардани дастгоҳҳои беруна.
- USB-C Input/Output Port: For charging the jump starter and external devices.
- Чароғаки LED: Multi-mode light for illumination, SOS, and strobe.
Image: The AstroAI P8 Jump Starter with its smart jumper cables connected, ready for use.
6. Пур кардани дастгоҳи Jump Starter
Before first use, fully charge the AstroAI P8. It is recommended to recharge the unit after each use to maintain battery health.
- Connect the provided USB-C charging cable to the USB-C input/output port on the jump starter.
- Plug the other end of the USB-C cable into a compatible USB wall adapter (not included) or car charger.
- The battery level indicator lights will illuminate and flash, indicating the charging progress. All lights will be solid when fully charged.
Image: The AstroAI P8 Jump Starter connected via USB-C to charge a smartphone and a tablet, demonstrating its power bank functionality.
7. Дастурҳои истифодабарӣ
7.1. Ҷаҳиш ба кор андохтани мошин
- Ensure the jump starter is sufficiently charged (at least 50%).
- Connect the smart jumper cables to the jump starter's port. Ensure a secure connection.
- cl сурхро замима кунедamp ба терминали мусбати (+) батареяи мошин.
- cl сиёҳро замима кунедamp ба терминали манфии (-)-и батареяи воситаи нақлиёт.
- Check the indicator light on the smart jumper cable. A solid green light indicates a correct connection and readiness to jump start. If it's flashing or red, check connections or refer to troubleshooting.
- Start the vehicle's engine. If it doesn't start immediately, wait at least 1 minute before trying again. Do not crank for more than 3 seconds per attempt.
- Once the vehicle starts, immediately remove the black clamp from the negative terminal, then the red clamp from the positive terminal.
- Disconnect the smart jumper cables from the jump starter.
Image: A person connecting the AstroAI P8 Jump Starter to a car battery, illustrating the process of jump starting a vehicle.
7.2. Истифода ҳамчун бонки барқ
The AstroAI P8 can charge various electronic devices.
- Connect your device's USB charging cable to one of the USB-A output ports or the USB-C port on the jump starter.
- Стартер ба таври худкор пуркунии дастгоҳи шуморо оғоз мекунад.
7.3. Истифодаи чароғаки LED
The built-in LED flashlight offers multiple modes for different situations.
- Press and hold the power button for 3 seconds to turn on the flashlight (illumination mode).
- Press the power button once to switch to SOS mode.
- Press the power button again to switch to strobe mode.
- Press the power button once more to turn off the flashlight.
Image: A person using the AstroAI P8 Jump Starter's multi-mode LED flashlight under the hood of a car at night.
8. Нигоҳдорӣ
- Store the jump starter in a cool, dry place away from direct sunlight and extreme temperatures.
- Recharge the unit every 3-6 months, even if not used, to maintain battery health.
- Берунро бо мулоим тоза кардан дamp матоъ. Моддаҳои кимиёвии сахт ё тозакунандаи абразивиро истифода набаред.
- Кабелҳо ва кабелҳоро тафтиш кунедamps for any damage before each use.
9. Баррасии мушкилот
| Мушкилот | Сабаби эҳтимолӣ | Ҳалли |
|---|---|---|
| Мошин оғоз намекунад. | Low charge on jump starter, incorrect connection, or vehicle battery completely dead. | Ensure jump starter is at least 50% charged. Recheck clamp connections. If battery is extremely dead, allow jump starter to connect for a few minutes before attempting to start. |
| Smart jumper cable indicator is red or flashing. | Reverse polarity, short circuit, or other safety protection activated. | Хомӯш кардани clamps and re-attach them correctly (red to positive, black to negative). If issue persists, check for short circuits or other battery issues. |
| Стартери ҷаҳиш пурбор намешавад. | Сими пуркунандаи барқ ё адаптери вайроншуда. | Try a different USB-C cable and wall adapter. Ensure connections are secure. |
10. Мушаххасоти
- Модели: P8
- Ҷараёни қулла: 4000 Amps
- Мутобиқати муҳаррик: Up to 10L Gas or 8L Diesel
- Ҷилдиtage: 12 вольт
- Навъи батарея: Литиум Полимер (дохил карда шудааст)
- Баромади USB-A (QC 3.0): 5V⎓3A, 9V⎓2A, 12V⎓1.5A
- Вуруд/баромади USB-C: 5V⎓3A, 9V⎓2A
- Андозаҳо: 183mm x 88mm x 39mm (7.20in x 3.45in x 1.53in)
- Вазни ашё: 710 гр
- Кишвари аслӣ: Хитой
11. Кафолат ва дастгирӣ
AstroAI products come with a manufacturer's warranty. For detailed warranty information, product support, or to register your product, please visit the official AstroAI webсайт ё бевосита бо хадамоти муштариёни худ тамос гиред. Квитансияи хариди худро барои даъвоҳои кафолат нигоҳ доред.
Истеҳсолкунанда: Astro AI
Тамос: Support@astroai.com