KATOOL 9500lbs 4 Post Lift Модели 4H950 Дастури дастур

1. Муқаддима

Thank you for choosing the KATOOL 9500lbs 4 Post Lift, Model 4H950. This manual provides essential information for the safe installation, operation, and maintenance of your new vehicle lift. Please read this manual thoroughly before attempting to assemble or operate the lift. Proper understanding and adherence to these instructions will ensure safe and efficient use, extending the lifespan of your equipment.

Figure 1.1: KATOOL 9500lbs 4 Post Lift, Model 4H950.

2. Маълумот оид ба бехатарӣ

Your safety and the safety of others are paramount. Always follow basic safety precautions when operating this equipment. Failure to do so may result in serious injury or property damage.

• Read and understand all instructions before operating the lift.
• Ensure the lift is installed on a level, solid concrete foundation capable of supporting the lift's weight and maximum load.
• Only trained and authorized personnel should operate the lift.
• Майдони корро тоза ва равшан нигоҳ доред.
• Do not exceed the maximum lifting capacity of 9,500 lbs.
• Always engage safety locks before working under a raised vehicle.
• Ensure proper vehicle positioning on the runways.
• Keep hands, feet, and clothing clear of moving parts.
• Never leave a raised vehicle unattended without engaging safety locks.
• Таҷҳизоти муҳофизати шахсии мувофиқ (PPE) пӯшед.
• Пеш аз анҷом додани ҳама гуна нигоҳдорӣ ё таъмир қувваи барқро ҷудо кунед.

3. Мундариҷаи баста

The KATOOL 9500lbs 4 Post Lift package includes the following components:

• 4 Post Lift Structure (Posts, Runways, Crossbeams)
• Moving Kits/Casters (for mobility)
• Алюминий Рamps (for vehicle access)
• Jack Tray (for use with optional jacking beam)
• Drip Trays (to protect vehicles parked underneath)
• Hydraulic Power Unit (110V)
• Кабелҳо ва шкивҳо
• Пайвасткунакҳо ва таҷҳизот

Figure 3.1: All included components in the KATOOL 4 Post Lift package.

4. Мушаххасоти

Key technical specifications for the KATOOL 9500lbs 4 Post Lift Model 4H950:

Figure 4.1: Product specifications and dimensions diagram.

5. Танзим ва насб

Proper installation is critical for the safe and reliable operation of your KATOOL 4 Post Lift. It is recommended that installation be performed by at least two individuals with appropriate tools and equipment.

5.1 Омодасозии сайт

• Ensure the installation area has a level concrete floor, free from cracks or defects, capable of supporting the lift's weight and maximum load. Consult a structural engineer if unsure.
• Verify adequate overhead clearance for the lift's maximum height (79 inches) plus the height of the vehicle.
• Ensure access to a dedicated 110V power outlet for the hydraulic power unit.

5.2 Unloading and Component Identification

The lift components are heavy. A forklift or similar heavy lifting equipment is required for unloading the shipment. Carefully unpackage all components and verify against the package contents list. Identify each part before beginning assembly.

5.3 Қадамҳои васлкунӣ (Умумӣ аз боло)view)

1. Мақолаҳои мавқеъ: Carefully position the four posts according to the desired layout, ensuring they are square and level.
2. Attach Crossbeams: Secure the crossbeams to the posts. This step often requires lifting the crossbeams into place.
3. Install Runways: Attach the runways to the crossbeams. Ensure proper alignment and secure all fasteners.
4. Кабелҳои масир: Install the lifting cables, routing them through the pulleys and securing them according to the detailed diagrams provided in the full assembly manual. Ensure cables are properly tensioned.
5. Connect Hydraulic System: Mount the hydraulic power unit and connect the hydraulic lines to the lift cylinder. Fill the reservoir with appropriate hydraulic fluid.
6. Install Safety Locks: Ensure all safety lock mechanisms are correctly installed and functional.
7. Лавозимотро замима кунед: Install the aluminum ramps, jack tray, drip trays, and casters as needed.

Figure 5.1: The KATOOL 4 Post Lift supporting two vehicles, showcasing its 9500lbs capacity and 79-inch lifting height.

Figure 5.2: Detail of the lift's safety lock mechanism.

Figure 5.3: Detail of the cable routing system.

Figure 5.4: The 110V hydraulic power unit.

6. Дастурҳои истифодабарӣ

Follow these steps for safe operation of your KATOOL 4 Post Lift:

6.1 Рӯйхати санҷиши пеш аз амалиёт

• Боварӣ ҳосил кунед, ки минтақаи лифт аз монеаҳо холӣ аст.
• Verify all fasteners are tight and cables are properly tensioned.
• Сатҳи моеъи гидравликиро тафтиш кунед.
• Confirm power supply is connected.

6.2 Бардоштани воситаи нақлиёт

1. Мавқеи воситаи нақлиёт: Drive the vehicle onto the runways, ensuring it is centered and within the designated lifting points.
2. Минтақаи тоза: Ensure no personnel or objects are near the lift's moving parts.
3. Initiate Lift: Press and hold the 'UP' button on the hydraulic power unit. The lift will begin to rise.
4. Қулфҳои бехатариро ба кор баред: Once the desired height is reached, or if working under the vehicle, lower the lift slightly until the safety locks engage. Listen for the audible click.
5. Verify Locks: Visually confirm that all four safety locks are fully engaged before working under the vehicle.

Figure 6.1: KATOOL 4 Post Lift in operation, showing a vehicle raised to working height.

6.3 Паст кардани воситаи нақлиёт

1. Минтақаи тоза: Ensure no personnel or objects are under or near the lift.
2. Каме боло бардоред: Press the 'UP' button briefly to relieve pressure on the safety locks.
3. Қулфҳоро кушоед: Operate the safety lock release mechanism (typically a lever or button).
4. Lower Lift: Press and hold the 'DOWN' button or lever to slowly lower the lift.
5. Remove Vehicle: Once the lift is fully lowered, carefully drive the vehicle off the runways.

7. Нигоҳдорӣ

Regular maintenance is essential for the longevity and safe operation of your KATOOL 4 Post Lift.

• Ҳар рӯз: Inspect cables, pulleys, and safety locks for wear or damage. Check for hydraulic fluid leaks.
• Ҳар ҳафта: Clean the lift structure. Check and lubricate all pivot points and moving parts.
• Ҳар моҳ: Check cable tension and adjust if necessary. Inspect all fasteners for tightness. Check hydraulic fluid level and top up if needed.
• Ҳар сол: Have a qualified technician perform a thorough inspection of the entire lift system, including hydraulic components, electrical connections, and structural integrity.

8. Баррасии мушкилот

This section addresses common issues you might encounter with your KATOOL 4 Post Lift.

8.1 Lift Does Not Rise

• Санҷиши нерӯ: Ensure the power unit is plugged in and receiving 110V power. Check circuit breaker.
• Моеъи гидравликӣ: Verify the hydraulic fluid level is adequate.
• Вазифаи моторӣ: Listen for the motor running. If not, check electrical connections.

8.2 Lift Lowers Unevenly

• Cable Tension: Inspect and adjust cable tension on all four posts to ensure they are uniform.
• Монеаҳо: Check for any obstructions preventing smooth lowering.

8.3 Safety Locks Not Engaging/Disengaging

• Санҷиши механизм: Inspect the safety lock mechanism for any debris, damage, or misalignment.
• Cable/Linkage: Ensure the release cables or linkages are free-moving and properly connected.

Барои масъалаҳое, ки дар ин ҷо фаро гирифта нашудаанд, ё агар қадамҳои ҳалли мушкилот мушкилотро ҳал накунанд, лутфан бо дастгирии муштариёни KATOOL тамос гиред.

9. Кафолат ва дастгирӣ

KATOOL stands behind the quality of its products. For specific warranty details, including coverage period and terms, please refer to the warranty card included with your purchase or visit the official KATOOL website. For technical assistance, parts, or any other support inquiries, please contact KATOOL customer service through the contact information provided with your product or on the manufacturer's webсайт.

When contacting support, please have your model number (4H950) and purchase date readily available.