Санҷиши батареяи ANCEL BT410 12V/24V ва дастури корбарии сканери OBD2 AD410PRO

1. Муқаддима

This manual provides detailed instructions for the safe and effective operation of your ANCEL BT410 12V/24V Battery Tester and ANCEL AD410PRO OBD2 Scanner. These devices are designed to assist in diagnosing vehicle issues and assessing battery health. Please read this manual thoroughly before use and retain it for future reference.

2. Маҳсулот ба охир расидview

The ANCEL BT410 and AD410PRO are versatile tools for automotive maintenance. The BT410 focuses on battery and charging system analysis, while the AD410PRO provides comprehensive OBD2 engine diagnostics and additional battery testing capabilities.

2.1. Мундариҷаи баста

• 1x ANCEL BT410 Enhanced 12V/24V Battery Tester
• 1x ANCEL AD410 PRO 2-IN-1 OBD2 Scanner Battery Tester

2.2. Хусусиятҳои дастгоҳ

ANCEL BT410 Battery Tester

Image: The ANCEL BT410 Battery Tester, featuring a clear display and robust battery clamps for connection. This device is designed for comprehensive battery and charging system analysis.

• 4-in-1 Battery Testing: Health, Cranking, Charging, Voltmeter.
• Wide Compatibility: Supports 12V/24V systems and various battery types (AGM, GEL, EFB, Lithium-Ion, Flooded).

ANCEL AD410 PRO OBD2 Scanner

Image: The ANCEL AD410 PRO OBD2 Scanner, showcasing its dual functionality with both an OBD2 connector and battery clamps. The display shows various diagnostic options.

• 10 Advanced Diagnostic Modes: Read/Clear Codes, Live Data, I/M Readiness, etc.
• Integrated Battery Testing: Supports 6V/12V lead-acid batteries (CCA 100-2000A), engine diagnostics, starter tests, and charging system analysis.

3. Насбкунӣ ва пайвастшавӣ

3.1. ANCEL BT410 Battery Tester Connection

1. Боварӣ ҳосил кунед, ки оташгирии мошин хомӯш аст.
2. Кл сурхро пайваст кунедamp ба терминали мусбати (+) батарея.
3. Cl сиёҳро пайваст кунедamp ба терминали манфии (-) батарея.
4. Дастгоҳ ба таври худкор фаъол мешавад.

3.2. ANCEL AD410 PRO OBD2 Scanner Connection

1. Locate the vehicle's 16-pin Data Link Connector (DLC), typically under the dashboard on the driver's side.
2. Боварӣ ҳосил кунед, ки оташгирии мошин хомӯш аст.
3. Plug the AD410 PRO's OBD2 connector firmly into the vehicle's DLC.
4. Turn the vehicle ignition to the 'ON' position (engine off). The device will power on automatically.

4. Дастурҳои истифодабарӣ

4.1. ANCEL BT410 Battery Tester Operations

The BT410 offers comprehensive battery and charging system analysis.

Image: The ANCEL BT410 screen showing a 'GOOD BATTERY' status with detailed metrics like Health, Charge, Internal Resistance, and Rated CCA. It also illustrates recommended actions based on battery condition (Charge & Retest, Replace, Bad Cell).

1. Санҷиши батарея: Select 'Battery Test' from the main menu. Follow on-screen prompts to input battery type (e.g., Regular Flooded, AGM, GEL, EFB, Lithium-Ion) and Cold Cranking Amps (CCA). The tester will display battery health, charge, internal resistance, and a recommendation (e.g., Good, Good-Recharge, Replace).
2. Санҷиши кранка: Select 'Cranking Test'. The device will prompt you to start the engine. It measures the cranking voltage and time to assess the starter motor's performance.
3. Санҷиши пуркунии барқ: Select 'Charging Test'. This test evaluates the alternator's performance under unloaded, loaded, and ripple conditions to ensure stable charging.
4. Вольтметр: Ҳаҷми вақти воқеиро таъмин мекунадtage readings of the battery.

4.2. ANCEL AD410 PRO OBD2 Scanner Operations

The AD410 PRO provides extensive OBD2 diagnostic functions.

Image: The ANCEL AD410 PRO screen illustrating a range of OBD2 diagnostic functions, including Read Codes, Clear Codes, Live Data Stream, I/M Readiness, and O2 Monitor Test, all contributing to turning off the check engine light.

1. Рамзҳои хондан: Retrieves Diagnostic Trouble Codes (DTCs) from the vehicle's Engine Control Unit (ECU).
2. Рамзҳоро тоза кунед: Clears DTCs from the ECU and turns off the Check Engine Light (MIL). Ensure the underlying issue is resolved before clearing codes.
3. Омодагии I/M: Ҳолати системаҳои мониторинги марбут ба партовҳоро тафтиш мекунад, то муайян кунад, ки оё воситаи нақлиёт барои санҷиши партовҳо омода аст ё не.
4. Ҷараёни маълумот: Displays real-time data parameters from the vehicle's sensors, such as engine RPM, vehicle speed, coolant temperature, and O2 sensor readings.
5. Чорчӯбаи яхкунӣ: Captures a snapshot of sensor data at the moment a DTC was set, providing valuable information for diagnosis.
6. Санҷиши сенсори O2: Retrieves O2 sensor monitoring test results for the most recently completed tests.
7. EVAP Leak Test: Initiates a test of the Evaporative Emission Control System (EVAP) for leaks.
8. Маълумот дар бораи мошин: Маълумоти воситаи нақлиётро ба монанди VIN (рақами мушаххаси воситаи нақлиёт), CIN (рақами муайянкунии калибрченкунӣ) ва CVN (рақами тасдиқи калибрченкунӣ) мегирад.
9. Ҷустуҷӯи DTC: Provides definitions for generic and manufacturer-specific DTCs directly on the device.

5. Нигоҳдорӣ

• Keep the devices clean and free from dirt, grease, and moisture. Use a soft, dry cloth for cleaning.
• Store the devices in a dry, cool environment away from direct sunlight and extreme temperatures.
• Regularly inspect cables and connectors for any signs of damage. Replace if necessary.
• No user-serviceable parts inside. Refer to qualified personnel for repairs.

6. Баррасии мушкилот

6.1. Дастгоҳ фаъол намешавад

• Ensure proper connection to the vehicle's OBD2 port or battery terminals.
• For AD410 PRO, confirm the vehicle ignition is in the 'ON' position.
• Check the vehicle's battery for sufficient charge.

6.2. Link Error/Communication Failure

• Verify the OBD2 connector is securely plugged into the DLC.
• Ensure the vehicle ignition is 'ON' and the engine is off.
• Check for any blown fuses in the vehicle's fuse box related to the OBD2 port.
• Confirm the vehicle is OBD2 compliant (most vehicles 1996 and newer in the US).

6.3. Screen Display Issues

• Adjust screen contrast in the device's setup menu if available.
• If the screen is blank or frozen, try disconnecting and reconnecting the device.

7. Мушаххасоти

• Бренд: АНЧЕЛ
• Модели: BT410, AD410PRO
• Battery Tester Compatibility (BT410): 12V/24V Lead-Acid (AGM, GEL, EFB, Flooded), Lithium-Ion Batteries
• OBD2 Scanner Compatibility (AD410PRO): Most 1996 and newer US-based vehicles, 2000 and newer EU-based and Asian vehicles.
• Battery Testing Range (AD410PRO): 6V/12V Lead-Acid (CCA 100-2000A)
• Намоиш: Backlit LCD (specific size may vary by model variant)
• Ҳарорати корӣ: 0°C то 60°C (32°F то 140°F)
• Ҳарорати нигоҳдорӣ: -20°C то 70°C (-4°F то 158°F)

8. Кафолат ва дастгирӣ

Your ANCEL product is covered by a limited warranty against defects in materials and workmanship. For specific warranty details, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official ANCEL website. Do not attempt to repair the device yourself, as this may void the warranty.