ANCEL DS500 Elite OBD2 Scanner and BT310 Battery Tester User Manual

1. Муқаддима

This manual provides detailed instructions for the ANCEL DS500 Elite Bidirectional Scan Tool and the ANCEL BT310 12V/24V Car Battery Tester. Please read this manual thoroughly before operating the devices to ensure correct usage and optimal performance. Keep this manual for future reference.

2. Маҳсулот ба охир расидview

2.1 ANCEL DS500 Elite Bidirectional Scan Tool

The ANCEL DS500 Elite is an advanced diagnostic scan tool designed for comprehensive vehicle system analysis. It features bidirectional control capabilities, allowing users to send commands to vehicle modules and monitor system responses. This tool supports full-system deep scans and offers over 3,000 active test commands.

Назорати дуҷониба: Perform active tests on various components like fuel pumps, cooling fans, windows, and mirrors.
Full System Deep Scan: Uncover critical data from every module and sensor, including Engine, ABS, Airbag, Transmission, TPMS, SAS, ESP, BCM, HVAC, EBS, and ACM.
Hot Reset Service: Access over 28 maintenance reset functions for various car brands, including D-P-F Regeneration, AdBlue Reset, Oil Life Reset, EGR Adaptation, IMMO Reset, Gear Learning, Battery Matching, SAS Calibration, A/F Ratio/Fuel Reset, ABS Bleeding, Air Suspension Reset, NOx Sensor Reset, AFS Reset, ETA Reset, Coolant Pump Activation, Brake-pad Reset, Seat Calibration, and Airbag Reset.
Навсозиҳои ройгони якумра: Ensures compatibility with evolving vehicle diagnostic systems without subscription fees.

ANCEL DS500 Elite performing bidirectional control tests on various car components. — Image: ANCEL DS500 Elite demonstrating bidirectional control functions, including fuel injector test, window control, rearview mirror control, and light control. The device shows an 'OK Activated' status for a command and an 'ERROR No Response' for another, illustrating its diagnostic capabilities.

ANCEL DS500 Elite displaying various hot reset service functions. — Image: The ANCEL DS500 Elite interface showcasing over 28 hot reset service functions, such as D-P-F Regeneration, AdBlue Reset, Oil Life Reset, EGR Adaptation, IMMO Reset, Gear Learning, Battery Matching, and SAS Calibration, indicating its comprehensive maintenance capabilities.

ANCEL DS500 Elite performing a full system deep scan. — Image: A visual representation of the ANCEL DS500 Elite performing a full system deep scan, highlighting its ability to access critical data from various modules and sensors like I.M.M.O.bilizer, SAS, ESP, BCM, HVAC, EBS, and ACM, along with functions like Read Codes, Erase Code, View Freeze Frame, Live Data, I/M Readiness, and Evap Leak Test.

2.2 ANCEL BT310 12V/24V Car Battery Tester

The ANCEL BT310 is a versatile battery load tester compatible with both 12V and 24V battery systems. It supports various battery types and provides accurate health assessments, cranking tests, and charging tests.

Мутобиқати универсалӣ: Supports 12V and 24V Lithium and Lead-Acid batteries, including Flooded, AGM (Spiral & Flat Plate), GEL, and EFB types.
Multiple Standards: Compatible with major battery standards such as CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, and GB.
Key Diagnostics: Measures State of Charge (SOC), State of Health (SOH), Voltage Test, Rated and Measured CCA, and Internal Resistance.
Натиҷаҳои санҷиш: Provides clear results: [GOOD BATTERY], [GOOD-RECHARGE], [CHARGE & RETEST], [REPLACE BATTERY], and [BAD CELL-REPLACE].

ANCEL BT310 battery tester showing compatibility with various battery types and vehicles. — Image: The ANCEL BT310 battery tester highlighting its compatibility with different battery types (Flooded, AGM, EFB, GEL, Lithium-Ion) and various vehicles such as ATVs, boats, cars, SUVs, pickups, and motorcycles, emphasizing its broad application.

3. Танзимот

3.1 ANCEL DS500 Elite Setup

Фаъол: Connect the DS500 Elite to the vehicle's OBD-II port. The device will power on automatically.
Конфигуратсияи ибтидоӣ: Follow the on-screen prompts to select language, time zone, and Wi-Fi connection.
Навсозии нармафзор: Ensure the device is connected to Wi-Fi and check for available software updates to maintain optimal performance and vehicle compatibility.

3.2 ANCEL BT310 Setup

Ба батарея пайваст шавед: Ensure the vehicle engine is off. Connect the red clamp ба терминали мусбат (+) батарея ва cl сиёҳamp ба терминали манфӣ (-).
Фаъол: The BT310 will power on automatically once connected to the battery.
Навъи батареяро интихоб кунед: Use the navigation buttons to select the correct battery type (e.g., Flooded, AGM, GEL, EFB, Lithium) and standard (e.g., CCA, BCI) as prompted on the screen.

ANCEL BT310 battery tester connected to a car battery for testing. — Image: The ANCEL BT310 battery tester connected to a car battery, illustrating the proper setup for testing. The image also highlights the device's 12V and 24V compatibility and its 100-2000 CCA testing range.

4. Дастурҳои истифодабарӣ

4.1 ANCEL DS500 Elite Operation

Пайвастшавӣ ба воситаи нақлиёт: Plug the OBD-II cable into the vehicle's diagnostic port, usually located under the dashboard.
Шиносоии мошин: The DS500 Elite will automatically detect the vehicle's VIN or prompt you to manually enter vehicle information (make, model, year).
Diagnostic Menu: Navigate the main menu to select desired functions:
- Ташхис: Perform full system scans, read/clear fault codes, view live data streams, and check I/M readiness.
- Санҷиши фаъол: Select specific control modules and components to perform bidirectional tests (e.g., activate ABS pump, cycle cooling fan).
- Хизматрасонӣ: Access various reset and maintenance functions (e.g., Oil Reset, EPB Reset, SAS Calibration).
- Навсозӣ: Навсозиҳои нармафзорро санҷед ва насб кунед.
Data Review: After performing tests, review the diagnostic reports, freeze frame data, and live data graphs on the device screen.

4.2 ANCEL BT310 Operation

Менюи асосӣ: Once powered on, the BT310 will display the main menu with options like 'Battery Test', 'Cranking Test', 'Charging Test', and 'Review Data'.
Санҷиши батарея: Select 'Battery Test'. The device will prompt you to enter the battery's rated CCA (Cold Cranking Amps) or other standard values. Follow the on-screen instructions. The test will provide results such as SOC, SOH, Voltage, Measured CCA, and Internal Resistance, along with a clear status (e.g., GOOD BATTERY, REPLACE BATTERY).
Санҷиши кранка: Select 'Cranking Test'. The device will instruct you to start the vehicle. It will then measure the cranking voltage and time, providing an assessment of the starter system's performance.
Санҷиши пуркунии барқ: Select 'Charging Test'. The device will instruct you to run the engine at idle and then at a higher RPM (e.g., 2500 RPM). It will measure the alternator's output voltage and ripple, assessing the charging system's efficiency.
Review Маълумот: Select 'Review Data' to view previously saved test results.

ANCEL BT310 displaying battery health results. — Image: The ANCEL BT310 battery tester screen showing detailed battery health metrics including Health, Charge, Voltage, Internal Resistance, and a 'GOOD BATTERY' status. It also illustrates the five possible battery health results: Good Battery, Good-Recharge, Charge & Retest, Replace Battery, and Bad Cell-Replace.

ANCEL BT310 performing cranking and charging tests. — Image: The ANCEL BT310 battery tester displaying results for both Cranking Test (Time, Voltage) and Charging Test (Unloaded, Loaded, Ripple), indicating 'CRANKING NORMAL' and 'VOLTAGE NORMAL' statuses, demonstrating its ability to assess the vehicle's starting and charging systems.

5. Нигоҳдорӣ

Тозакунӣ: Use a soft, dry cloth to clean the device screens and bodies. Avoid using abrasive cleaners or solvents.
Нигоҳдорӣ: Store both devices in a dry, cool environment, away from direct sunlight and extreme temperatures.
Нигоҳубини кабел: Inspect cables regularly for any signs of damage. Do not pull on the cables to disconnect them; always grasp the connector.
Software Updates (DS500 Elite): Regularly check for and install software updates to ensure the scanner has the latest vehicle data and diagnostic capabilities.

6. Баррасии мушкилот

Дастгоҳ фаъол нест:
- DS500 Elite: Ensure the OBD-II cable is securely connected to the vehicle's diagnostic port. Check the vehicle's battery for sufficient charge.
- BT310: Боварӣ ҳосил кунед, ки clamps are correctly connected to the battery terminals (red to positive, black to negative) and that the battery has sufficient voltage.
Communication Error (DS500 Elite):
- Санҷед, ки оё оташгирии мошин фаъол аст.
- Ensure the OBD-II connector is fully seated.
- Verify that the vehicle supports the OBD-II protocol.
- Try testing on a different compatible vehicle to rule out a vehicle-specific issue.
Inaccurate Battery Test Results (BT310):
- Боварӣ ҳосил кунед, ки батарея clamps are clean and have good contact with the battery terminals.
- Verify that the correct battery type and CCA rating were entered into the tester.
- Пеш аз анҷом додани санҷиш, барои натиҷаҳои дақиқтарин, боварӣ ҳосил кунед, ки батарея пурра пур карда шудааст.
Screen Freezes or Device Unresponsive:
- Perform a soft reset by holding the power button (if available) or disconnecting and reconnecting the device.
- If the issue persists, contact ANCEL support.

7. Мушаххасоти

7.1 ANCEL DS500 Elite Bidirectional Scan Tool

Протсессор: 2.0GHz Cortex-A53 Quad-Core
Низоми амал: Android 10.0
Хотира: 2 ГБ RAM, 32 ГБ ROM
Намоиш: 7-inch screen, 1024x600 resolution
Батарея: 3150 мАч, 3.8 В
Пайвастшавӣ: Wi-Fi for updates and online support
Функсияҳои ташхис: Full system diagnostics, bidirectional control, 28+ reset services.

ANCEL DS500 Elite hardware specifications including processor, OS, memory, screen, and battery. — Image: Detailed hardware specifications of the ANCEL DS500 Elite, including its 2.0GHz Cortex-A53 Quad-Core processor, Android 10.0 operating system, 2GB RAM, 32GB ROM, 7-inch 1024x600 resolution display, and 3150mAh 3.8V battery, highlighting its robust internal components.

7.2 ANCEL BT310 12V/24V Car Battery Tester

Ҷилдиtage Диапазон: 12В ва 24В
Диапазони CCA: 100-2000 CCA
Намудҳои батареяҳои дастгирӣшаванда: Flooded, AGM (Spiral & Flat Plate), GEL, EFB, Lithium.
Стандартҳои дастгирӣшаванда: CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE, GB.
Tests Performed: Battery Health (SOC, SOH, Voltage, Internal Resistance, Rated/Measured CCA), Cranking Test, Charging Test.

8. Кафолат ва дастгирӣ

The ANCEL DS500 Elite comes with lifetime free software updates, ensuring your tool remains compatible with evolving vehicle diagnostic systems without additional subscription fees. For technical assistance or support, you can easily contact the professional engineering team through the online chat window available on the DS500 Elite device. Feedback can also be provided via the feedback section on the device to help improve services.

ANCEL DS500 Elite, BT310