PIZZELLO Rectangular Dining Table Instruction Manual

Қадами 1: Connect panel E and panel D using screw G and nut N. Ensure correct connection by checking for 4 silver screw heads in the middle of the table.
Қадами 2: Assemble parts C, Cupright, F, and L screws as instructed.
Қадами 3: Continue assembling part F with part B using L screws.
Қадами 4: Attach the connected B and C parts to the tabletop using screw J.
Қадами 5: Connect part A with parts B and C using screws J and H. Secure with screw H from the inside.

Patio Bistro Chair

Follow the labeled legs for the front side indication
Assemble on a flat surface to avoid scratches
Do not dispose of the original box until you confirm the product
Contact after-sales service for product return

МУҚАДДИМА

Thank you for choosing our rectangular dining table! This table is designed for durability, weather resistance, and low maintenance, making it a great addition to both indoor and outdoor spaces.
To ensure long-lasting use and maintain its quality, please read and follow the usage precautions below.

Эҳтиёткорӣ оид ба истифода

ДИККАТ

Муқовимати гармӣ: The table can withstand temperatures between -104℉ to -140℉ (-40℃to -60℃）. Avoid placing high-temperature objects (such as grills or hot pots) directly on the surface to prevent damage. Using heat-resistant mats is recommended.
Аз таъсири дарозмуддати офтоб худдорӣ намоед: While our table is weather-resistant, extended exposure to strong sunlight may cause fading or slight warping. Covering the table with a cloth or protective cover when not in use is advised.
Пешгирӣ кардан Харошидан: Avoid using sharp objects such as knives directly on the table surface to prevent scratches.

АСБОБХО ДАРКОР

ТАЛАБОТИ МОНТАЖ

Рӯйхати падарон

ДАСТУРАМАИ МОНТАЖ

Қадами 1
- Use screw G and nut N to connect panel E and panel D.
- Шарҳ: If part E is correctly connected, you will see the 4 silver screw heads in the middle of the table.
- Please check it before installing.
- A) If part E is correctly connected, you will see the 4 silver screw heads in the middle of the table.
- B) If part E is incorrectly connected, you will see the 4 silver screw heads on the side of the table, and you will have a problem on the next step.
Қадами 2
1. Stand parts C and Cupright at a 90-degree angle to the ground or easier installation.
2. Insert one end of part F into part C, align the holes, and secure it with two L screws.
Қадами 3
- Insert the other end of part F into part B, align the holes, and secure it with two L screws
Қадами 4
- Attach the connected B and C parts to the tabletop using screw J.
Қадами 5
- Use screws J and H to connect part 2 (A) parts with parts B and C.
- (Secure with screw H from the inside)
- Secure with screw H from the inside

PATIO BISTRO CHAIR

Муштарии мӯҳтарам,

Thank you for choosing our product. Please read this manual carefully before assembling or using the product, to avoid damage caused by improper use.
If the product is passed on to third parties, this manual has to be passed on along with the product. For any questions, don’t hesitate to contact us.

АСБОБХО ДАРКОР

ТАЛАБОТИ МОНТАЖ

РӮЙХАТИ ҚИСМ

Fasten screws loosely during initial assembly. Do not ﬁrmly tighten screws until step 7.

Дастурҳо оид ба васлкунӣ

Маслиҳатҳо: We have labeled the legs to indicate which side is the front side.
However, the factory sometimes mislabeled them. Please check with the picture before installing; the straighter side should be the front side.

ДИККАТ

When installing, we suggest you can assemble the product on the ﬂat carton which comes with the product, or any other clean ﬂoor to avoid the product surface being scratched.
Please do not dispose of the original product box until you conﬁrm you received the complete and correct item.
If you want to return the product, you are suggested to contact our after-sales service ﬁrst. You need to pack the returned product with the original box and then follow the steps to return it.
Қадам 1: Connect the beam (E) and the left front leg (A). Use the screw (G) and nut (F) to connect them.
Please don’t tighten the screws yet.
Қадам 2: Connect the beam (E) andthe Right Front Leg (B). Use the screw (G) and nut (F) to connect them.
Please don’t tighten the screws yet.
Қадам 3: Attach the chair seat (C) to the Left Front Leg (A) and the Right Front Leg (B).
Please make sure you attach the seat from the correct direction.
Қадами 4: Use the 4 scresw (G) and 4 nuts (F) to connect them.
Қадам 5: Remove the 2 protective cases on the seat (C).
Қадам 6: Assert the seat back (D) to the seat (C).
Қадам 7: Ҳама винтҳо ва чормағзҳоро маҳкам кунед.

How To Replace The Back And Seat

A: Slowly take apart the back of the back frame.
B) Slowly take apart the seat from the seat frame.
Шарҳ: When replacing the new seat and back, make sure you assemble them from the correct direction. The edge with round angle should face outside.

Саволҳои зиёд такрормешуда

Оё ман метавонам мизи ошхонаро дар берун истифода барам?

Yes, the table is designed for both indoor and outdoor use. It is weather-resistant.

What is the weight capacity of the patio bistro chair?

Кафедра дорои иқтидори вазни 265 фунт мебошад.

Ҳуҷҷатҳо / Сарчашмаҳо

PIZZELLO Rectangular Dining Table [pdf] Дастури дастур
Rectangular Dining Table, Rectangular Table, Dining Table

Иқтибосҳо

Дастури корбар

PIZZELLO Rectangular Dining Table

Мушаххасоти

Дастурҳои истифодаи маҳсулот

Рӯйхати қисмҳо:

Воситаҳои зарурӣ: